(Advice needed) Z77x UD5h and Samsung green ram (no XMP)

[stasio]

Here is good thread:
Ultra low profile 1.35v 30nm DDR3 capable of 2400MHz. Perfect for SFF builds..

[Hyper530]

Please provide exact model name of your Samsung module

[boondocks]

When I get my wc loop installed I'll have to go back and revisit this ram. Worked pretty good with the 2600k but was unable to set speed higher than 2133. Now that I have the IB cpu I'll have to crank on it. Interestingly, the read speeds (at 2133) on this ram was as good as my G Skill 2400, although it falls behind on copy and write speeds IIRC.

[Krysaenaar]

Please provide exact model name of your Samsung module

Hey there,

Samsung Green (MV-3V4G3D/US) 8GB (4x4GB) DDR3 PC3-12800C11 1600MHz 30nm Dual Channel Kit [MV-3V4G3D/US]

[sin0822]

yea we need this memory to be made more compatible with these boards!!!!!!!!!! I mean no one is using any samsung memory that isn't this, they say samsung ULV it is only this memory, and almost always the 4GB modules as they are double sided. They need to be made more compatible.

Also these are the only memories I have that will run at 1600mhz stock(meaning i don't have to change it).

[2therock]

I have the Z77x UD5H and Samsung green ram and clocked to 4.5. Before the CPU overclock I could get these 2133 & 1866 RAM clocks stable but after the CPU overclock nothing I do will let me get very far in Intel Burn Test on High.

Is there anyone or place I can submit my profile to and let them have a look? Ar any suggestions on it would be great.

[Conners]

Here are my settings for 21.33 @ 4.5 Ghz 10-10-10-28 1T 1.50V you may need 11-11-11-28 1T @ 1.55V

CPU = Model # Intel 3770K
Motherboard = G1.Sniper3, Revision 1.0
BIOS Version = F6a
Ram = Samsung Green 8GB 2x4GB MV-3V4G3D/US Dual Channel DDR3 

MIT Current Status..................................[ENTER]

Advanced Freqency Settings..........................[ENTER]
CPU/PCIe Base Clock................100.00MHz........[AUTO]
Processor Graphics Clock...........1150.............[Auto]
CPU Clock Ratio....................35...............[45] 
CPU Frequency......................3.5GHz...........4.50GHz

Advanced CPU Core Features..........................[ENTER]
Turbo Power Limit (WATTS)..........77...............[300]------|These two are only available in Turbo Mode
Core Current Limit (AMPS)..........112..............[200]------|^^^^^

Advanced Memory Settings............................[ENTER]
Performance Enhanced................................[TURBO] 

[2therock]

Thanks Conners but its a no go. I get the multiple beeps at boot. I tried both timings and with 1t and 2t, no go. Went up and down with the dram voltage and nada. Beep beeps.

Must be me being 16GB and Z77X-UD5H, and you sniper and 8GB?

I am stable with 1866 as seen below. See my DVID. I tried yours and mine.

CPU = Model # Intel 3770K
Motherboard = G1.Sniper3, Revision 1.0
BIOS Version = F6a
Ram = Samsung Green 8GB 2x4GB MV-3V4G3D/US Dual Channel DDR3

MIT Current Status..................................[ENTER]

Advanced Freqency Settings..........................[ENTER]
CPU/PCIe Base Clock................100.00MHz........[AUTO]
Processor Graphics Clock...........1150.............[Auto]
CPU Clock Ratio....................35...............[45]
CPU Frequency......................3.5GHz...........4. 50GHz

Advanced CPU Core Features..........................[ENTER]
Turbo Power Limit (WATTS)..........77...............[300]------|These two are only available in Turbo Mode (Turbo Mode set from where? Mine do have the same numbers though)
Core Current Limit (AMPS)..........112..............[200]------|^^^^^

Advanced Memory Settings............................[ENTER]
Performance Enhanced................................[High] I don't have a "High" Normal/Turbo/Extreme (Tried them all)
Dram Timing Slectable...............................[Quick]
Profile DDR Voltage...............1.50V.............[1.50V]
Profile VTT Voltage...............1.05V.............[1.05V]
Channel Interleaving................................[AUTO]
Rank Interleaving...................................[AUTO]

[ENTER] Channel A Timing Settings
Channel A Standard Timing Control
CAS Latency.......................11................[10]
tRCD..............................11.............. ..[10]
tRP...............................11.............. ..[10]
tRAS..............................28.............. ..[28]
Command Rate(tCMD)................1.................[1]

Advanced Voltage Settings...........................[ENTER]
3D Power Control....................................[ENTER]
PM Phase ConTrol....................................[eXm Perf]
Vcore Voltage Response..............................[Fast]
Vcore Loadline Calibration..........................[HIGH]

CPU Core Voltage Control
CPU Vcore..........................1.195V............[Normal] 1.140v How did you get it to say 1.195v and Normal? I could not match that
DYnamic V core(DVID)...............+0.00v............[-0.005V] I AM + 0.025 I tried yours and mine.
CPU PLL............................1.800V............[1.800]
IMC................................0.925V......... ...[AUTO]

DRAM Voltage Control
DRAM VOltage......(CH A/B).........1.500V.....

Here is how I'm rolling now

[Conners]

Yeah the High is a typo on Performance Enhanced should read Turbo. For 16 Gigs you may need more vdim say up to 1.65V Also IMC voltage may need to be raised. Whats ok/Max IDK.

I got mine to read 1.95 and normal by setting it to normal your board determines the voltage based on your oc. Like a 45 multi. Looks like your cpu requires less voltage than mine (1.140v)

[Conners]

BTW heres a full bios template for you to use if you like just change to your settings. When you post it be sure to used the code tags which you'll find in advanced reply menue it's the pound key # Also you may want to start your own thread on this...

CPU = Model # Intel 3770K
Motherboard = G1.Sniper3, Revision 1.0
BIOS Version = F6a
Ram = Samsung Green 8GB 2x4GB MV-3V4G3D/US Dual Channel DDR3 

MIT Current Status..................................[ENTER]

Advanced Freqency Settings..........................[ENTER]
CPU/PCIe Base Clock................100.00MHz........[AUTO]
Processor Graphics Clock...........1150.............[Auto]
CPU Clock Ratio....................35...............[45] 
CPU Frequency......................3.5GHz...........4.50GHz

Advanced CPU Core Features..........................[ENTER]
Intel(R) Turbo Boost Technology.....................[AUTO]
  Turbo Ratio (1-Core Active.......39...............[AUTO]
  Turbo Ratio (2-Core Active.......39...............[AUTO]
  Turbo Ratio (3-Core Active.......38...............[AUTO]
  Turbo Ratio (4-Core Active.......37...............[AUTO]
Turbo Power Limit (WATTS)..........77...............[300]
Core Current Limit (AMPS)..........112..............[200]
CPU Core Enable....................4................[AUTO]
Hyper-Threading Technology..........................[AUTO]
CPU Enhanced Halt(C1E)..............................[AUTO]
C3/C6 State Support.................................[AUTO]
CPU Thermal Monitor.................................[AUTO]
CPU EIST Function...................................[Auto]

System Memory Multiplier..........[16]..............[21.33]
Memory Frequency..................1600MHz...........2133MHZ

Advanced Memory Settings............................[ENTER]
Performance Enhanced................................[Turbo]
Dram Timing Slectable...............................[Quick]
Profile DDR Voltage...............1.50V.............[1.50V]
Profile VTT Voltage...............1.05V.............[1.05V]
Channel Interleaving................................[AUTO]
Rank Interleaving...................................[AUTO]

[ENTER] Channel A Timing Settings
Channel A Standard Timing Control
CAS Latency.......................11................[11]
tRCD..............................11................[11]
tRP...............................11................[11]
tRAS..............................28................[28]

Standard A Advanced Timing Control
tRC...............................39................[AUTO]
tRRD..............................5.................[AUTO]
tWTR..............................6.................[AUTO]
tWR...............................12................[AUTO]
tWTP..............................24................[AUTO]
tWL...............................8.................[AUTO]
tRFC..............................128...............[AUTO]
tRTP..............................6.................[AUTO]
tFAW..............................24................[AUTO]
Command Rate(tCMD)................1.................[AUTO]
tRW Stability Level...............3.................[AUTO]
TWR Stability Level...............3.................[AUTO] 

[ENTER] Channel B Timing Settings
Channel B Standard Timing Control
CAS Latency.......................11................[11]
tRCD..............................11................[11]
tRP...............................11................[11]
tRAS..............................28................[28]

Standard B Advanced Timing Control
tRC...............................39................[AUTO]
tRRD..............................5.................[AUTO]
tWTR..............................6.................[AUTO]
tWR...............................12................[AUTO]
tWTP..............................24................[AUTO]
tLW...............................8.................[AUTO]
tRFC..............................128...............[AUTO]
tRTP..............................6.................[AUTO]
tFAW..............................24................[AUTO]
Command Rate(tCMD)................1.................[AUTO]
tRW Stability Level...............3.................[AUTO]
TWR Stability Level...............3.................[AUTO] 

Advanced Voltage Settings...........................[ENTER]
3D Power Control....................................[ENTER]
PM Phase ConTrol....................................[eXm Perf]
Vcore Voltage Response..............................[Fast]
Vcore Loadline Calibration..........................[HIGH]
GFX Voltage Loadline Calibration....................[AUTO]
DDR CH(A/B) Voltage Loadline Calibration............[AUTO]
CPU Vtt Loadline Claibration........................[AUTO]

Vcore Protection...................250.0mV..........[AUTO]
DDR CH(A/B) Voltage Protection.....250.0mV..........[AUTO]

Vcore Current Protection............................[AUTO]
CPU Vtt Current Protection..........................[AUTO]
GFX Current Protection..............................[AUTO]
DDR CN(A/B) Current Protection......................[AUTO]

Vcore Protection...................250.0mV..........[AUTO]
DDR CH(A/B) Voltage Protection.....250.0mV..........[AUTO]

Vcore Current Protection............................[AUTO]
CPU Vtt Current Protection..........................[AUTO]
GFX Current Protection..............................[AUTO]
DDR CH(A/B) Current Protection......................[AUTO]

Vcore PWM THermal Protection.......130.0°C..........[AUTO]
DDR CH(A/B) PWM Thermal Protection.130.0°C..........[AUTO]

CPU PWM Switch Rate................500.0KHz.........[AUTO]
GFX PWM Switch Rate................250.0KHz.........[AUTO]
CPU Vtt PWM Switch Rate............250.0KHz.........[AUTO]
DDR CH(A/B) PWM Switch Rate........250.0KHz.........[AUTO]

CPU Core Voltage Control
CPU Vcore..........................1.195V............[Normal]
DYnamic V core(DVID)...............+0.00v............[-0.005V]
CPU PLL............................1.800V............[1.785]
IMC................................0.925V............[AUTO]
Dynamic GFX Core(VAXG DVID)........+0.000V...........[AUTO]

DRAM Voltage Control
DRAM VOltage......(CH A/B).........1.500V............[1.555V]
DRAm Termination..(CH A/B).........0.750V............[AUTO]
Data Reference....(CH A)...........0.750V............[Auto]
Address Reference.(CH A)...........0.750V............[AUTO]
Data Reference....(CH B)...........0.750V............[AUTO]
Address Reference.(CH B)...........0.750V............[AUTO]