Re: CPU Fan Control on GA-Z77-UD5H/3570K
Like you saw, the higher you set the PWM slope the higher the rpm. When I was using an air cooler (NH-D14) I was using the 2.50 setting-it seemed to ramp up to max rpm's quicker.
I personally don't care to use ET6 for fan control, I use a hardware controller, and I don't know where settings are stored but to get it to start up on next boot you tick the setting when you right click on the tray icon. Will it preserve settings? I don't know.
Yeah I think an H60 is underkill for an IB cpu if you overclock. But 55c is not bad, better get used to higher temps cause IB ain't SB. If you want a real thrill click the automatic overclock "feature" in the new ET6. But I've seen some surprisingly "low" temps with some coolers I wouldn't think would cut it, if the posters are to be believed that is.
What are your max temps under load?
Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me
Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
HTPC: Z68 Pro3 M / 2105
SOLD:Z97X-UD5H /4790K/F11b mod BIOSemail@example.com 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30