Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 6 of 6

Thread: GA G41M-COMBO DDR3 Error

  1. #1
    Tasossoulis is offline Junior Member
    Join Date
    Jan 2014
    Location
    Greece
    Posts
    3

    Default GA G41M-COMBO DDR3 Error

    My motherboard ga g41m combo supports ddr3 1066 and 1333 O.C. up to 8gb memories.
    My cpu is intel core 2 duo e6600 1066 fsb speed. When i instal the memories the pc not even boots and starts beeping like (didididdidididididdi)
    then is trying to restart and the same is happening again. What should i do?
    I dont have access to bios when these memories are instaled.
    I have also 2 ddr2 memories 1gbx2, so do i have to change any settings with these and then instal the new one,
    and if yes wich settings and what timings(?)

    Thanks in advance.

  2. #2
    Tasossoulis is offline Junior Member
    Join Date
    Jan 2014
    Location
    Greece
    Posts
    3

    Default Re: GA G41M-COMBO DDR3 Error

    Quote Originally Posted by Tasossoulis View Post
    My motherboard ga g41m combo supports ddr3 1066 and 1333 O.C. up to 8gb memories.
    My cpu is intel core 2 duo e6600 1066 fsb speed. When i instal the memories the pc not even boots and starts beeping like (didididdidididididdi)
    then is trying to restart and the same is happening again. What should i do?
    I dont have access to bios when these memories are instaled.
    I have also 2 ddr2 memories 1gbx2, so do i have to change any settings with these and then instal the new one,
    and if yes wich settings and what timings(?)

    Thanks in advance.
    Bump ?

  3. #3
    - wardog -'s Avatar
    - wardog - is offline Spam Killer
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,131

    Default Re: GA G41M-COMBO DDR3 Error

    You would more than likely either have to clear the BIOS after putting the DDR3 sticks in. Or make sure before changing out the DDR2 sticks that all memory related settings were set to Auto, and even then a BIOS clear may be necessary before successful boot.

    Also consider that the DDR3 you have may be incompatible with the motherboard and that that maybe too is what's causing this headache.
    #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
    ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.

    #2 - G.Skill RAM Configurator for your boardSamsung Memory for your boardLatest AMD Chipset Drivers/WindowsLatest AMD Graphics Drivers/WindowsLatest Intel Drivers

    #3 - Please use the PSU Calculator found HERE to determine if it might be the PSU causing issues. I do(Lifetime PRO ver.) and will mention so if it is marginal for your build.
    ____Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

    Mine: ASRock Z77 Extreme6, i7-3770K, 16GB F3-14900CL9D-8GBSR, Seasonic X-750 Gold, On-die HD 4000, Corsair H80i, Antec Spot Cool, Fractal Design R4 Black Pearl w/Window
    Hers: ASRock 990FX Extreme4, FX-4170, 16GB AE316G1601U2K, Seasonic X-650 Gold, Asus HD7770-2GD5, Corsair H80i, Antec Spot Cool, Fractal Design R4 Black Pearl w/Window
    Server 1: ASRock 990FX Extreme9, FX-8150, 32GB AE316G1601U2K, Seasonic X-750 Gold, IBM ServeRAID M1015, PowerColor AX5450 1GBK3-SH, Corsair H80i, Antec Spot Cool, Fractal Design XL R2
    Server 2: ASRock FM2A88X Extreme6+, A10-6800K, 16GB F3-17000CL11D-8GBXL, Seasonic SS-660XP2, Fractal Design Arc Midi R2

  4. #4
    Tasossoulis is offline Junior Member
    Join Date
    Jan 2014
    Location
    Greece
    Posts
    3

    Default Re: GA G41M-COMBO DDR3 Error

    Quote Originally Posted by - wardog - View Post
    You would more than likely either have to clear the BIOS after putting the DDR3 sticks in. Or make sure before changing out the DDR2 sticks that all memory related settings were set to Auto, and even then a BIOS clear may be necessary before successful boot.

    Also consider that the DDR3 you have may be incompatible with the motherboard and that that maybe too is what's causing this headache.
    I tryed to reset bios by pull out the mobo battery but that didnt help...
    I saw in this forum a thread (GA-G41M-Combo (Rev.2) problem with DDR3 mmemory.)
    that i might need a lower in frequency ram to set the settings before put on
    the ddr3 memories, but even if i borrow a ddr3 lower memory what settings should i change?
    Pls help becouse i have to test it fast...

  5. #5
    - wardog -'s Avatar
    - wardog - is offline Spam Killer
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,131

    Default Re: GA G41M-COMBO DDR3 Error

    Please read #1 in my Sig below.
    #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
    ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.

    #2 - G.Skill RAM Configurator for your boardSamsung Memory for your boardLatest AMD Chipset Drivers/WindowsLatest AMD Graphics Drivers/WindowsLatest Intel Drivers

    #3 - Please use the PSU Calculator found HERE to determine if it might be the PSU causing issues. I do(Lifetime PRO ver.) and will mention so if it is marginal for your build.
    ____Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

    Mine: ASRock Z77 Extreme6, i7-3770K, 16GB F3-14900CL9D-8GBSR, Seasonic X-750 Gold, On-die HD 4000, Corsair H80i, Antec Spot Cool, Fractal Design R4 Black Pearl w/Window
    Hers: ASRock 990FX Extreme4, FX-4170, 16GB AE316G1601U2K, Seasonic X-650 Gold, Asus HD7770-2GD5, Corsair H80i, Antec Spot Cool, Fractal Design R4 Black Pearl w/Window
    Server 1: ASRock 990FX Extreme9, FX-8150, 32GB AE316G1601U2K, Seasonic X-750 Gold, IBM ServeRAID M1015, PowerColor AX5450 1GBK3-SH, Corsair H80i, Antec Spot Cool, Fractal Design XL R2
    Server 2: ASRock FM2A88X Extreme6+, A10-6800K, 16GB F3-17000CL11D-8GBXL, Seasonic SS-660XP2, Fractal Design Arc Midi R2

  6. #6
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    6,563

    Default Re: GA G41M-COMBO DDR3 Error

    DDR3 memory compatibility is usually a problem with older systems.
    Check out EP35C-DS3R won't boot with new DDR3 ram, post #27 for a memory kit that might work with your system.

    As stated above, you need to post detailed information about your system in your forum signature and/or using the PC Specs feature.

    We need detailed information about ALL OF THE HARDWARE in your system.

    We can best help you after you create a detailed hardware list in the System Specs
    portion of your forum profile at the bottom of the profile page or in your forum signature.
    Be sure to include brand names and model numbers.
    When you are done editing or creating your hardware list, save the settings.
    Q9650 @ 3.80GHz [9x422MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 844MHz @4-4-4-10
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •