ASRock TSD - Emily
Moderator

Sorry Emily, did you reciv my PM. I can't find out box message :D

Motherboard AsRock ConRoe 1333-1394 trying to install Sapphire HD 5450 graphics card but get no output. Can you supply BIOS update.

hi emily

i already solved my problem about gigabyte hd 5450 on my wolfdale1333-glan..
i contacted asrock tsd on asrock's website and they gave me a bios update.. everything's running fine now
if someone have the same problem as i please pm me,,i'll gladly help u..
btw thanks for the trouble..

Hello i saw your post about the asrock motherboard problem with ivybridge cpu and i am having that problem i was wondering if you could help me? Like you said on that post. This is my first intel cpu so i need to do a bios update and i dont know how.

hello emily, I am having a similar problem to some other users, I am building a computer and I am trying to use the Z68 Extreme 3 Gen 3 with an i5 cpu with Ivy Bridge. I have read that this is compatible with ivy bridge but requires a newer BIOS. Could you help me with getting a new BIOS chip? I do not have another cpu with sandy bridge to flash the motherboard with. thanks - Eric

Hey Emily,

I've got the same problem as several other people on this forum (graphics card not recognized by motherboard, specifically EVGA 560 Ti not recognized by Asrock Extreme4 Gen3), and I needed help with this issue. I was specifically looking for a custom BIOS update. Here's my thread: http://forums.tweaktown.com/asrock/4...ideo-card.html

Hello,
it is still not possible to install the newest Nvidia Notebook driver, on the Asrock 3D Vision 137B HTPC.
When will Asrock, put finally the newest Driver (296.10) on the Download Site?
I do the workaround for the 280.26 Driver and it works!!!
The System runs more smoother than before!
I thínk it is time to get support, for a 700 Euro HTPC System.
It is necessary for a HTPC, to keep the drivers actual for best experience.


A unhappy costumer :-(

Dear Ruok,

Please kindly update BIOS L2.04 from below link to try.
http://www.asrock.com/mb/beta.asp?Mo... Extreme7 Gen3

If any question, please kindly contact me.
Thanks for your message.

Have a nice day
ASRock TSD
Emily

Hi, I've got a K90 and a Z68 Extreme 7 Gen 3 motherboard. I've tried the L1.34 bios and the 1.30M bios but both do not fix the problem. I'm using the latest corsair firmware 2.12.

I bought an asrock motherboard it is a 4 core 1333-e sata2 dual channel ddr2 800. when i first turned it on i got the code 1394 guid invalid in both cmos and flash. also got the same code for mac address. can you send me a tool to fix this please. I have tryed to contact tech support through the web site to no help or even a reply. You can email me back at matt@sbfnetworks.com
thank you Matt