I've got a Phenom Black 955 running on a 790XT-UD4P with 4gb (2X2gb) GSkill DDR3 1600 RAM... no issues for 3 years.
Figured I'd bump it up to (2X4gb) 8gb of the same rated GSkill ($57 at Newegg).
Found a post for running AMD CPU + GSkill DDR3 1600
As suggested... Set CPU Host / Bus Freq. to 240 for 1600 + lowered the CPU ratio to get it back down to 3.4
Set timings to the rated 9-9-9-24
DRAM voltage = 1.6 (auto)
Booted + showed 8gb... then subsequently 'crashed'.
Was hoping someone has successfully run 8gb on a similar set-up and could provide their settings.
Rick/Canada
Figured I'd bump it up to (2X4gb) 8gb of the same rated GSkill ($57 at Newegg).
Found a post for running AMD CPU + GSkill DDR3 1600
As suggested... Set CPU Host / Bus Freq. to 240 for 1600 + lowered the CPU ratio to get it back down to 3.4
Set timings to the rated 9-9-9-24
DRAM voltage = 1.6 (auto)
Booted + showed 8gb... then subsequently 'crashed'.
Was hoping someone has successfully run 8gb on a similar set-up and could provide their settings.
Rick/Canada
Comment