Review My OC + suggestions

[deefx]

Hi guys,
First time poster, have read a little bit on the OC Guide's that have been floating around on the net and I currently have the cpu overclocked at 3.8GHz. I'm sure the settings I am using could use more tweaking, so this is the reason for my posting. If there is anything you guys think I could do further or what settings you think I should change to achieve 4.0GHz that would be fantastic! :D

SPECS:
CPU - Intel i7 930 2.8GHz SLBKP BATCH # 3001A141
COOLER - Prolima Megahalems Rev.B with 2 S-Flex SSF21E 1200RPM in a push\pull configuration
MB - Gigabyte X58A-UD3R BIOS F5
RAM - 12GB of G.Skill F3-12800CL9T-6GBNQ DDR3-1600 CL 9-9-9-24 1.5V
PSU - Corsair HX650W
GPU - BFG 1GB GTX285
HDD - Intel X25-M 80GB G2
CASE - HAF 922

BIOS TEMPLATE
Advanced CPU Features:
CPU Clock Ratio ................................ [21x]
Intel(R) Turbo Boost Tech .................. [Disabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Enabled]
Bi-Directional PROCHOT ..................... [Enabled]

Uncore & QPI Features:
QPI Link Speed .............................. [x36]
6.51GHz
Uncore Frequency .......................... [x17]
3077MHz
Isonchronous Frequency ..................[Enabled]

Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 181
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]

Advanced DRAM Features:
Performance Enhance ...................... [Turbo]
Extreme Memory Profile (X.M.P) ......... [Disabled]
Memory Frequency ........................1066 1448
System Memory Multiplier (SPD) ........ [8.0]
DRAM Timing Selectable (SPD) .......... [Expert]
Channel A + B + C
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................9
tRCD .......................................9
tRP .........................................9
tRAS .......................................24
Command Rate (CMD) ................2

Advanced Voltage Control:
CPU
Load Line Calibration ................. [Standard]
CPU Vcore ............................... 1.27500V
QPI/VTT Voltage 1.150v ............ 1.275V
CPU PLL 1.800v ....................... 1.8V
MCH/ICH
PCIE 1.500v ........................... 1.5V
QPI PLL 1.100v ....................... 1.140V
IOH Core 1.100v ..................... 1.140V
ICH I/O 1.500v ....................... 1.50V
ICH Core 1.1v ........................ 1.1V
DRAM
DRAM Voltage 1.500v .............. 1.5V
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]

With these settings my cpu currently idles at 39C and on full load at 67C. Ran OCCT Linpack for 1HR and IBT 5Passes on Normal and Very High and so far it passed (will stress test the system more later)
So whatever suggestions you guys have would be greatly appreciated.
Thank You in advance

[Lsdmeasap]

Looks good as far as settings for the speed given.

Do you want to try 4Ghz with memory at 1600? Try this for 4Ghz-4.2

Advanced CPU Features:
CPU Clock Ratio ................................ [21x] x19 x190, or x21 x 200 for 4.2Ghz, or 210 x 190
Intel(R) Turbo Boost Tech .................. [Disabled]
CPU Cores Enabled ............................ [All]
CPU Multi Threading .......................... [Enabled]
CPU Enhanced Halt (C1E) ................... [Disabled]
C3/C6/C7 State Support .................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ............................ [Disabled]
Virtualization Technology ................... [Enabled]
Bi-Directional PROCHOT ..................... [Enabled]

Uncore & QPI Features:
QPI Link Speed .............................. [x36]
6.51GHz
Uncore Frequency .......................... [x17] << 16-18
3077MHz
Isonchronous Frequency ..................[Enabled]

Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... 190 or 200 (190 for x21 multi, 200 for 21 multi @ 4.2Ghz) can also try 210x19
PCI Express Frequency (MHz) ........... [100]
C.I.A.2 [Disabled]
Advanced Clock Control:
CPU Clock Drive ..............................[800mV]
PCI Express Clock Drive ................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]

Advanced DRAM Features:
Performance Enhance ...................... [Turbo] Or Extreme
Extreme Memory Profile (X.M.P) ......... [Disabled]
Memory Frequency ........................1520-1600
System Memory Multiplier (SPD) ........ [8.0]
DRAM Timing Selectable (SPD) .......... [Expert]

Channel A + B + C
Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ......................9
tRCD .......................................9
tRP .........................................9
tRAS .......................................24/28
Command Rate (CMD) ................2 << 1T

Advanced Voltage Control:
CPU
Load Line Calibration ................. [Standard] Level 1
CPU Vcore ............................... 1.27500V << 1.3-1.4
QPI/VTT Voltage 1.150v ............ 1.275V << 1.3-1.45
CPU PLL 1.800v ....................... 1.8V-1.84

MCH/ICH
PCIE 1.500v ........................... 1.5V
QPI PLL 1.100v ....................... 1.140V << 1.18-1.24
IOH Core 1.100v ..................... 1.140V << 1,16-1.2
ICH I/O 1.500v ....................... 1.50V
ICH Core 1.1v ........................ 1.1V << 1,14

DRAM
DRAM Voltage 1.500v .............. 1.5V << 1.66
DRAM Termination 0.750v [AUTO]
Ch-A Data VRef. 0.750v [AUTO]
Ch-B Data VRef. 0.750v [AUTO]
Ch-C Data VRef. 0.750v [AUTO]
Ch-A Address VRef. 0.750v [AUTO]
Ch-B Address VRef. 0.750v [AUTO]
Ch-C Address VRef. 0.750v [AUTO]