Need help OC q6600 on gigabyte mobo P41T-ES3G

[Chike]

Yes PSU off.

[zegi69]

tnx man you saved me, i know it there is somewere reset pins for bios but i forgot. i changed few settings on my own becouse i was pissed, when i upped vcore to 1.3750 i got only 35 gflops and my idle temp was high about 40, and before it was as low as 28C

[zegi69]

sorry for panic, and tnx a lot for help!!! Man how old r u what do you do for a living, i mean i am entusiast but you know this stuff to the bone.

[Chike]

I see, the temps are higher and same GFlops at 3GHz?
Try running one thread in LinX and see what result you get.

[zegi69]

best result in linX was when settings on vcore was on normal, i had there 37 gflops and temp was ok

[Chike]

If you wish to try higher memory frequency, try SMM 4.00B.
What are the options for memory voltage above 1.5v?
What is the default MCH Core and what options it has above 1.2v?

[Chike]

Yes this is weird that you had 37 and then they all dropped to 30.
Run MaxxMEM² - PreView and see what results you get.

[zegi69]

If you wish to try higher memory frequency, try SMM 4.00B.
What are the options for memory voltage above 1.5v?
What is the default MCH Core and what options it has above 1.2v?

mem voltage above 1.5 is 1.6, 1.7, 1.8, 1.9, 2.0 but last 2 is highlighted with red
default mch core is auto and above 1.2 it has 1.3 and 1.4
tnx for everything for today i have to go to sleep i have a early trip tomorow

[Chike]

I meant the default that is shown on the left.
Try to run LinX with 1 or 2 threads and see what result you get.
I thought it's the memory but I booted at 3GHz with same memory settings (1066 7-7-7-20 Static tRead 9) and I get 19.89GFlops with 2 cores. But maybe it's not enough for 4 cores.
Good night, post the results tomorrow

[zegi69]

I meant the default that is shown on the left.
Try to run LinX with 1 or 2 threads and see what result you get.
I thought it's the memory but I booted at 3GHz with same memory settings (1066 7-7-7-20 Static tRead 9) and I get 19.89GFlops with 2 cores. But maybe it's not enough for 4 cores.
Good night, post the results tomorrow

i set memory on normal and on the left is 1.5 default
mch is set on 1.2 and on the left is 1.2 here is image for that other program you asked

and there is something with linX setup that determine results too, if i set to do test just once i get realy low gflops of 19 and highest temp of just 62, but if i set it to do 3 tests i get 39, 36, 31 and temp is about 70C.
as far as i can see this is now stable system it passes all tests.
One question is it best settings-performance for ram 7 7 7 20?