Tweet
So I'm trying to connect my EVGA GTX 460 as a secondary card in my system to run PhysX processing. Unfortunately, it's not going very far. Whenever I boot up, the motherboard comes on, then the system powers down. It will turn back on again, and stops at LED Display "95". It gets no further than this. When I boot up with just my GTX 670, all is well. If I boot up with just the 460, all is well. It doesn't matter what mode I put the BIOS in. I currently run in 100% UEFI mode with no CSM; so I thought maybe I'd turn the CSM on and that would resolve the issue. No go. System still does not get through POST. I've got a Corsair AX850 PSU which SHOULD be able to handle the load. I can use either set of power connectors coming from the PSU and it does not make a difference.
-
-
Re: GA-Z77X-UD5H No POST with 2 video cards
The only potential issue is that there's some sort of incompatibility with my 670 running in EFI mode versus the 460's legacy BIOS mode... -
Re: GA-Z77X-UD5H No POST with 2 video cards
have you tried setting peg to gen2 mode? and set display to peg instead of auto? see if that helpsGigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
Comment
Comment