No announcement yet.

Xp-sp1

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Xp-sp1

    Can't seem to get pass the DOS based screen after getting the
    new cdkey number from "XPProCorp-keyChanger.exe.
    It doesn't go to the "Activate Windows" screen it just closes. Please help.
    Stan Eminem

    THANX sirlancelot!!!!!
    :thumb:

  • #2
    I didn't use the keychanger; instead I followed the instructions above step by step and everything worked as described;

    http://www.govital.net/~soz/changekey.htm

    I did make sure that I used one key generated by

    xp.suite.keygen.zip

    and I also made sure it'd be appropriate for the CD I have; I discovered that not all keys are accepted and I tried them until I found one that was accepted by the CD. In order to do this just pretend you're installing XP until you're asked for a key and see if it's accepted. One may have to try several until a suitable one is found; I had to try more than 20 to find a good one.

    I also went here

    http://www.trwhotfilez.kit.net/xpsp1/xpsp1.html#best

    and downloaded

    ViewKeyXP.exe

    to make sure I had the new key activated before running SP1.

    Afterwards I just applied SP1 and I had no problems at all.

    Good luck.

    Comment

    Working...
    X