Evening all,
So i downloaded and updated to F9 Bios on my X99 G1 Wifi Board. When it rebooted my Raid1 (accel'd with a m.2 ssd) no longer showed up. So I went into the BIOS and saw that the Windows 8 Features was set back to Other OS. No problem I though so I set it to Windows 8 then Disabled CSM again. Now when it rebooted it just hangs at the bios screen stuck on POST CODE 92 (LED on the motherboard shows this also).
Resetting the bios lets it boot back into windows fine, albeit without access to my Raid1 Array which was previously configured via Intel RST. I was on BIOS F8C, the previous beta from a few months ago and this worked without issue.
Here is what I have tried and if it works or not:
* F9 Bios, Windows 8 Mode - Other OS -- Boots Fine
* F9 Bios, Windows 8 Mode - Windows 8 - CSM Enabled -- Boots Fine
* F9 Bios, Windows 8 Mode - Windows 8 - CSM Disabled -- Hangs at BIOS screen POST code 92
I rolled back to Bios F8 (just downloaded from gigabyte's site)
* F8 Bios, Windows 8 Mode - Other OS -- Boots Fine
* F8 Bios, Windows 8 Mode - Windows 8 - CSM Enabled -- Boots Fine
* F8 Bios, Windows 8 Mode - Windows 8 - CSM Disabled -- Hangs at BIOS screen POST code 92
How it was originally before I mucked any of this up:
*F8c Bios - Windows 8 Mode - Windows 8 - CSM Disabled - Booted fine and Intel RST worked.
I have been able to get into the bios while it is "hung" by rebooting and pressing the direct to bios button just above the motherboard LED, and when I do it showed CSM Disabled, but under Perpherals intel RST doesn't show up at the bottom where it should.
I just downloaded F7 and have the f8c bios I was using and am going to try the same above tests.
Any other than I ran into this or have any insight?
Thanks!
So i downloaded and updated to F9 Bios on my X99 G1 Wifi Board. When it rebooted my Raid1 (accel'd with a m.2 ssd) no longer showed up. So I went into the BIOS and saw that the Windows 8 Features was set back to Other OS. No problem I though so I set it to Windows 8 then Disabled CSM again. Now when it rebooted it just hangs at the bios screen stuck on POST CODE 92 (LED on the motherboard shows this also).
Resetting the bios lets it boot back into windows fine, albeit without access to my Raid1 Array which was previously configured via Intel RST. I was on BIOS F8C, the previous beta from a few months ago and this worked without issue.
Here is what I have tried and if it works or not:
* F9 Bios, Windows 8 Mode - Other OS -- Boots Fine
* F9 Bios, Windows 8 Mode - Windows 8 - CSM Enabled -- Boots Fine
* F9 Bios, Windows 8 Mode - Windows 8 - CSM Disabled -- Hangs at BIOS screen POST code 92
I rolled back to Bios F8 (just downloaded from gigabyte's site)
* F8 Bios, Windows 8 Mode - Other OS -- Boots Fine
* F8 Bios, Windows 8 Mode - Windows 8 - CSM Enabled -- Boots Fine
* F8 Bios, Windows 8 Mode - Windows 8 - CSM Disabled -- Hangs at BIOS screen POST code 92
How it was originally before I mucked any of this up:
*F8c Bios - Windows 8 Mode - Windows 8 - CSM Disabled - Booted fine and Intel RST worked.
I have been able to get into the bios while it is "hung" by rebooting and pressing the direct to bios button just above the motherboard LED, and when I do it showed CSM Disabled, but under Perpherals intel RST doesn't show up at the bottom where it should.
I just downloaded F7 and have the f8c bios I was using and am going to try the same above tests.
Any other than I ran into this or have any insight?
Thanks!
Comment