No announcement yet.

x99 Extreme 4/3.1 Red Light + No Display

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • x99 Extreme 4/3.1 Red Light + No Display

    Hello everyone.


    I need a bit of advice, my Asrock x99 Extreme 4/3.1 has no display and a red light on "BIOS_A" LED that will does not extinguish.


    My build consists of:
    1. MOBA: ASRock X99 Extreme4/3.1 ATX LGA2011-3 Motherboard
    2. CPU: Intel Xeon E5-2630 V3 2.4GHz 8-Core Processor
    3. RAM: Crucial 2x8g DDR4 CT8G4DFD8213.C16FAD1
    4. PSU: CORSAID AX860i
    5. GPU: EVGA GEFORCE GTX960


    So far I have tried reseating the GPU, reseating combinations of RAM, reattaching cables?�I'm at a loss.... Help?!


    Does this happen often?


    Thanks,
    FBW

  • #2
    Re: x99 Extreme 4/3.1 Red Light + No Display

    Dear flybywire44,

    Due to X99 Extreme 4/3.1 board have dual BIOS ROM chip to have better backup and recovery function, the red led is to indicate currently of BIOS ROM chip.

    Please kindly try below suggestion for verify:
    1.Refer user manual page20 switch BIOS to B for verify:http://download.asrock.com/manual/X99%20Extreme43.1.pdf
    2.Check the Dr. debug code LED have any information and refer below page to verify:ASRock > Support > FAQ
    3.Remove VGA card and test with on board VGA to verify.
    4.Remove CPU and check whether CPU socket pin bent.

    If problem still remains please feel free to let me know and provide more information or some picture for us to verify.

    ASRock TSD
    Eddy
    Last edited by ASRock TSD-Eddy; 09-01-2015, 03:32 AM.

    Comment

    Working...
    X