No announcement yet.

Gigabyte GA-X58A-UD5 Stabilty Issue!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gigabyte GA-X58A-UD5 Stabilty Issue!!!

    Hello,
    I need some assistance in getting my Gigabyte GA-X58A-UD5 Motherboard stable!!! It keeps shutting down giving me either a blue-screen of death or just shutting down and restarting. I have everything set to: optimized defaults and AHCI mode enabled. I have tried to set the memory to the specs that it is supposed to run at which is 1600 MHz, 1.6 Volts and Timings 9-9-9-24 but it still will not run stable? Any help would be greatly appreciated. Thanks and hope to hear back soon.
    Here are my computer specs:



    Motherboard: GA-X58A-UD5 (rev.1)
    Processor: Intel i7 920 Bloomfield C0/C1
    Memory: Corsair XMS3 CM3X2G1600C9 (12 GB)
    Hard drive: Samsung SSD 840 Pro
    Graphics Cards: ATI HD4850 and HD4650

  • #2
    Re: Gigabyte GA-X58A-UD5 Stabilty Issue!!!

    <code id="yui_3_10_0_1_1459567606078_514" class="coffeescript" data-component="highlight">This worked really nice and smooth for me.


    Advanced CPU Features:
    CPU Clock Ratio ................................ [21x]
    Intel(R) Turbo Boost Tech .................. [Enabled]
    CPU Cores Enabled ............................ [All]
    CPU Multi Threading .......................... [Enabled]
    CPU Enhanced Halt (C1E) ................... [Disabled]
    C3/C6/C7 State Support .................... [Disabled]
    CPU Thermal Monitor ......................... [Enabled]
    CPU EIST Function ............................ [Disabled]
    Virtualization Technology ................... [Enabled] << Disabled if you do not use Vmware or Virtual PC Programs
    Bi-Directional PROCHOT ..................... [Enabled]


    Uncore & QPI Features:
    QPI Link Speed .............................. x36
    Uncore Frequency .......................... (Always 2x memory Multi or 2x +1) → 16x
    Isonchronous Frequency ..................[Enabled]


    Standard Clock Control:
    Base Clock (BCLK) Control ................ [Enabled]
    BCLK Frequency (MHz) ..................... 158
    PCI Express Frequency (MHz) ........... [100]

    C.I.A.2 [Disabled]

    Advanced Clock Control:
    CPU Clock Drive ..............................[800mV]
    PCI Express Clock Drive ................... [900mV]
    CPU Clock Skew ............................. [0ps]
    IOH Clock Skew ............................. [0ps]


    Advanced DRAM Features:
    Performance Enhance ...................... [Standard]
    Extreme Memory Profile (X.M.P) ......... [Disabled]
    System Memory Multiplier (SPD) ........ 8
    DRAM Timing Selectable (SPD) .......... [Manual]

    Channel A + B + C

    Channel A Timing Settings:
    ##Channel A Standard Timing Control##
    CAS Latency Time ...................... <--- Manually enter your timings here
    tRCD ....................................... <--- Manually enter your timings here
    tRP ......................................... <--- Manually enter your timings here
    tRAS ....................................... <--- Manually enter your timings here

    Below values may be left in Auto if you like, generally this is fine. For those users who DO Set advanced timings manually, please see some of my thoughts and findings about these settings and rules here
    XtremeSystems Forums - View Single Post - Gigabyte EX58-UD5/Extreme Discussion Thread

    ##Channel A Advanced Timing Control##
    tRC ........................................ (Should be = tRAS + tRP or above for stability)
    tRRD .......................................
    tWTR ...................................... (Must be Write to Read Delay/Same Rank - (tWL + 4)
    tWR ........................................
    tWTP ....................................... (tWTP Must = tWR + tWL + 4)
    tWL ........................................ (tWL Must be CAS Latency -1)
    tRFC .......................................
    tRTP .......................................
    tFAW ......................................
    Command Rate (CMD) ................

    ##Channel A Misc Timing Control##
    Round Trip Latency ...................

    B2B CAS Delay ..........................


    Advanced Voltage Control:

    CPU
    Load Line Calibration ................. [Disabled]
    CPU Vcore ............................... 1.23V (you may need less considering it is a small overclock)
    QPI/VTT Voltage 1.150v ............ 1.2V (more or less depending on the IMC)
    CPU PLL 1.800v ....................... 1.800V

    MCH/ICH
    PCIE 1.500v ........................... 1.500V
    QPI PLL 1.100v ....................... 1.100V
    IOH Core 1.100v ..................... 1.100V
    ICH I/O 1.500v ....................... 1.500V
    ICH Core 1.1v ........................ 1.1V

    DRAM
    DRAM Voltage 1.500v .............. 1.65V (or whatever your RAM is rated for)
    DRAM Termination 0.750v [AUTO]
    Ch-A Data VRef. 0.750v [AUTO]
    Ch-B Data VRef. 0.750v [AUTO]
    Ch-C Data VRef. 0.750v [AUTO]
    Ch-A Address VRef. 0.750v [AUTO]
    Ch-B Address VRef. 0.750v [AUTO]
    Ch-C Address VRef. 0.750v [AUTO]</code>

    Comment

    Working...
    X