Hello everyone, I am new here and asking for some help please, here are my specs
------------------
System Information
------------------
Time of this report: 5/24/2016, 06:50:59
Machine name: DA-1-PC
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.150525-0603)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: H61M-DS2 ( rev 1.0 updated bios to F4 )
Processor: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (4 CPUs), ~3.3GHz
Memory: 8192MB RAM
Available OS Memory: 4080MB RAM
Page File: 2806MB used, 13506MB available
DirectX Version: DirectX 11
---------------
Display Devices
---------------
Card name: NVIDIA GeForce 9600 GT
Manufacturer: NVIDIA
Chip type: GeForce 9600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0622&SUBSYS_23651682&REV_A1
Display Memory: 2279 MB
Dedicated Memory: 495 MB
Shared Memory: 1783 MB
Current Mode: 1440 x 900 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: SyncMaster
Monitor Id: SAM02AD
Native Mode: 1440 x 900(p) (59.887Hz)
Memory SPD
-------------------------------------------------------------------------
DIMM # 1
SMBus address 0x50
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Kingston (7F980000000000000000)
Size 4096 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number 9905458-028.A00LF
Serial number 0F28B87A
Manufacturing date Week 51/Year 13
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 6.0-6-6-17-23 @ 457 MHz
JEDEC #2 7.0-7-7-20-27 @ 533 MHz
JEDEC #3 8.0-8-8-22-30 @ 609 MHz
JEDEC #4 9.0-9-9-24-33 @ 666 MHz
DIMM # 2
SMBus address 0x52
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Kingston (7F980000000000000000)
Size 4096 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number 9905458-028.A00LF
Serial number 0F28BD7A
Manufacturing date Week 51/Year 13
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 6.0-6-6-17-23 @ 457 MHz
JEDEC #2 7.0-7-7-20-27 @ 533 MHz
JEDEC #3 8.0-8-8-22-30 @ 609 MHz
JEDEC #4 9.0-9-9-24-33 @ 666 MHz
ok so with that out the way, I had a foxcon motherboard when I built the system, but the mb broke just after warranty, a friend of mine bought this board but could not use it due to his gfx was covering the sata ports, so I bought it 2nd off him, I had to update the bios as the chip would not boot, I have been using it for over 1 year now with no problems, I did not notice it before until I played some more demanding games, it says in bios 4096mb of ram found on both slots but under that it says enabled slot 2048 for both of the memories, I have tried on 3 different occasions to ask gigabyte for help they said I must go back to the store where it was bought but I can`t as they have closed down, so I am asking for help here that someone can help me as I am not utilizing my full memory, many thanks for your time and all help.
Edit: Kingston was kind enough to swop out the memory as I thought that was the problem, so they are new sticks, I have also checked all the pins on the motherboard and all caps as well, I have tried many different methods before coming here, changing bios settings, msconfig ect.... P.s many thanks to profJim for moving my post to its own thread.
Regards, Da_1
------------------
System Information
------------------
Time of this report: 5/24/2016, 06:50:59
Machine name: DA-1-PC
Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.150525-0603)
Language: English (Regional Setting: English)
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: H61M-DS2 ( rev 1.0 updated bios to F4 )
Processor: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (4 CPUs), ~3.3GHz
Memory: 8192MB RAM
Available OS Memory: 4080MB RAM
Page File: 2806MB used, 13506MB available
DirectX Version: DirectX 11
---------------
Display Devices
---------------
Card name: NVIDIA GeForce 9600 GT
Manufacturer: NVIDIA
Chip type: GeForce 9600 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0622&SUBSYS_23651682&REV_A1
Display Memory: 2279 MB
Dedicated Memory: 495 MB
Shared Memory: 1783 MB
Current Mode: 1440 x 900 (32 bit) (60Hz)
Monitor Name: Generic PnP Monitor
Monitor Model: SyncMaster
Monitor Id: SAM02AD
Native Mode: 1440 x 900(p) (59.887Hz)
Memory SPD
-------------------------------------------------------------------------
DIMM # 1
SMBus address 0x50
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Kingston (7F980000000000000000)
Size 4096 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number 9905458-028.A00LF
Serial number 0F28B87A
Manufacturing date Week 51/Year 13
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 6.0-6-6-17-23 @ 457 MHz
JEDEC #2 7.0-7-7-20-27 @ 533 MHz
JEDEC #3 8.0-8-8-22-30 @ 609 MHz
JEDEC #4 9.0-9-9-24-33 @ 666 MHz
DIMM # 2
SMBus address 0x52
Memory type DDR3
Module format UDIMM
Manufacturer (ID) Kingston (7F980000000000000000)
Size 4096 MBytes
Max bandwidth PC3-10700 (667 MHz)
Part number 9905458-028.A00LF
Serial number 0F28BD7A
Manufacturing date Week 51/Year 13
Number of banks 8
Nominal Voltage 1.50 Volts
EPP no
XMP no
AMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 6.0-6-6-17-23 @ 457 MHz
JEDEC #2 7.0-7-7-20-27 @ 533 MHz
JEDEC #3 8.0-8-8-22-30 @ 609 MHz
JEDEC #4 9.0-9-9-24-33 @ 666 MHz
ok so with that out the way, I had a foxcon motherboard when I built the system, but the mb broke just after warranty, a friend of mine bought this board but could not use it due to his gfx was covering the sata ports, so I bought it 2nd off him, I had to update the bios as the chip would not boot, I have been using it for over 1 year now with no problems, I did not notice it before until I played some more demanding games, it says in bios 4096mb of ram found on both slots but under that it says enabled slot 2048 for both of the memories, I have tried on 3 different occasions to ask gigabyte for help they said I must go back to the store where it was bought but I can`t as they have closed down, so I am asking for help here that someone can help me as I am not utilizing my full memory, many thanks for your time and all help.
Edit: Kingston was kind enough to swop out the memory as I thought that was the problem, so they are new sticks, I have also checked all the pins on the motherboard and all caps as well, I have tried many different methods before coming here, changing bios settings, msconfig ect.... P.s many thanks to profJim for moving my post to its own thread.
Regards, Da_1
Comment