PDA

View Full Version : Power Switch Creation



Juggalo_Dan
06-30-2003, 04:21 AM
I have made a switch out of an old LED wire from an OLD case :P
I took the LED out of the case and cut the LED off of the leads, then i taped the wire to my wall and now when i touch them together, VOILA! the comp turns on or off :)
This concludes the story of my custom Power switch, im my words its cool, but please, leave your opinion to;)

Juggalo_Dan
06-30-2003, 04:25 AM
PIC!
This is the LED i used
http://www.caseoutlet.com/Accessory/images/led-hdd-600.jpg
I just cut the LED off and plugged it into my mobo, and now i got a power switch :D

Wiggo
06-30-2003, 07:58 AM
Now if ya go to ya local electronics and get a momentary on switch ya'll have a real professional job (ya can also do the same thing for the reset). :beer:

minibubba
06-30-2003, 08:29 AM
I think it would be much better if you put a real switch/button on it of some kind

Juggalo_Dan
06-30-2003, 08:34 AM
well. this is only temporary, since im getting my case on Tuesday :P

minibubba
06-30-2003, 09:51 AM
^ :cackle: so why didn't you tell us that sooner...

Beefy
06-30-2003, 10:00 AM
When did this place turn into 'Ghetto modz R us'? :)

Juggalo_Dan
06-30-2003, 10:26 AM
correction
'Cost Free Ghetto modz R us' :D
oh, and there is a Hamilton in aus???

Beefy
06-30-2003, 10:41 AM
There's about 5 I think. :) Plus there's a Hamilton Island off the coast too. Nothing on the scale of Hamilton over there though.

Juggalo_Dan
06-30-2003, 10:43 AM
We, can somewhat say we live in the same place :D