Tweet
12 x 200 - 2400Mhz
Why can't I run this setting stable? I can do half a bench then crasch..
I haven't added any ddr voltage but should I really need to do that with pc-3200 mem which haven't even passed over it's rating at that setting..?
AGP locked at 66Mhz.
Vcore tested every setting up to 1.8Volt!! :eek:
Temps are fine, 38-40 due to winter and a open window.. :D
Specs in my sig, there you also see my current oc which is rock stable for some reason,
even with agressive mem timings..
(11.5 x 200 - 2300Mhz)
Any help would be greatly appriciated.. /THX
Why can't I run this setting stable? I can do half a bench then crasch..
I haven't added any ddr voltage but should I really need to do that with pc-3200 mem which haven't even passed over it's rating at that setting..?
AGP locked at 66Mhz.
Vcore tested every setting up to 1.8Volt!! :eek:
Temps are fine, 38-40 due to winter and a open window.. :D
Specs in my sig, there you also see my current oc which is rock stable for some reason,
even with agressive mem timings..
(11.5 x 200 - 2300Mhz)
Any help would be greatly appriciated.. /THX