Hi guys. I'm hoping you can help me.
I just built a new set up with a soltek SL-75DRV5, AMD 1800+, OCZ PC2700 DDR 256MB, Enlight Case with 340 Watt power supply. Also using a PCI geforce 2 64MB from my old pc.
When I turn on the pc, I get about a 3 second beep followed by about 4 seconds of silence. And this will continue to repeat. I get no video at all. There is a thread similiar to this problem and I've tried everything with no luck (eg. clear cmos, insulate motherboard, tried all kinds of ddr cmos settings( I removed the floppy, HD, and cdrom from board with just video card connected...same problem. I know the monitor and card are fine. Award says that any beep code beside a long-short-short beep, is a ram problem. Is their a known problem between OCZ and the via KT333 chipset?
Any suggestions would be helpful. Thanks.
I just built a new set up with a soltek SL-75DRV5, AMD 1800+, OCZ PC2700 DDR 256MB, Enlight Case with 340 Watt power supply. Also using a PCI geforce 2 64MB from my old pc.
When I turn on the pc, I get about a 3 second beep followed by about 4 seconds of silence. And this will continue to repeat. I get no video at all. There is a thread similiar to this problem and I've tried everything with no luck (eg. clear cmos, insulate motherboard, tried all kinds of ddr cmos settings( I removed the floppy, HD, and cdrom from board with just video card connected...same problem. I know the monitor and card are fine. Award says that any beep code beside a long-short-short beep, is a ram problem. Is their a known problem between OCZ and the via KT333 chipset?
Any suggestions would be helpful. Thanks.
Comment