Guys ;Just finished putting together a system with this MB,a e6850, 8800 gts,corsair 620hx psu, antec 900 case,etc.
The first thing I did after firing it up was go into the bios to monitor temps.
The one thing that concerned was "vcore failed" in the "PC Health Status". This is before I made any changes in the bios.
I also noticed my system temp. to be quite high, around 52 degrees although I can touch the NB heat sink which doesn't seem overly hot.
I noticed when building this system the NB heat sink being loose although the plastic pins where properly engaged.
If you need any extra info please advice
Cheers
Fawlty
The first thing I did after firing it up was go into the bios to monitor temps.
The one thing that concerned was "vcore failed" in the "PC Health Status". This is before I made any changes in the bios.
I also noticed my system temp. to be quite high, around 52 degrees although I can touch the NB heat sink which doesn't seem overly hot.
I noticed when building this system the NB heat sink being loose although the plastic pins where properly engaged.
If you need any extra info please advice
Cheers
Fawlty
Comment