PDA

View Full Version : ga-p35 ds3l long beep at startup



caikmh
11-28-2007, 04:17 PM
hi !!

1.first, im sorry for my bad english.
my p.c is only 1 month old( there was no problem at the begining)
in last few days, when i turn on my p.c a long beep(10 sec) is occure (it's happen only when system is cold)
i updated the bios to f6 but still the same problem, i open up the case and evrything seems o.k,all fans working
(after beep the system start's vista normally,
i try also to change some settings in bios(smart fan speed enabled-disabled).
i cant see any hardware problem as far as i know'
can it be wrong bios setting?-i took off the bios battery also.
(the problem occure only when p.c is cold)
2.how do i find the advance settings in bios?
ctrl+f1 not working


my system: 2.66ghz dual core cpu
2gb ocz 800mhz dual
sparkle 8800gts calibre
samsung hd 320gb
wd hd 250gb
2 dvd writers-sansung

thank you very mutch
Arik.f

GIGABYTE - Janus Yeh
11-28-2007, 05:01 PM
can you try plug your memory again?
or ....what is your memory partname?

caikmh
11-28-2007, 10:50 PM
Hi

i allready unpluged my memory sim
i took a screen shot of memory deatails

Thanke you

caikmh
12-05-2007, 01:31 PM
Hi All

guess what?
i went yesterday to the lab, they turn on the p.c:no beep
they opend up the case:suprise:no internal speaker!!!
so where the beeps came from?
the tech said that i have a problem with my electric current flow!,
and some times the power supply capacitors make this sound because of that problem,
what shoud i do now???????????

GIGABYTE - Janus Yeh
12-06-2007, 09:14 AM
didn't the lab gave you any suggestion?

caikmh
12-06-2007, 01:47 PM
Hi
because the problem did not occure in the lab
they could do nothing,the tech want me to leave my p.c there
but i refused,

caikmh
12-08-2007, 02:55 PM
finally i found the problem:

its my sparkle 8800 gts calibre make this long beep,
the question now is why???????(the card&fans working fine)!
any ideas??

Arik

wayout44
12-08-2007, 06:38 PM
What make and model of PSU do you have?

caikmh
12-09-2007, 04:15 AM
my psu: Hec 400art

Kingme24
12-09-2007, 04:31 AM
Make sure you have the molex connectors plugged into the card, secondly that almost certainly isn't enough power for that card and the rest of your PC.

caikmh
12-09-2007, 05:22 AM
hi
its very intresthing because the p.c worked for few weeks with now
problemo,
so what's happen now?(this p.c in 1 month old)

wayout44
12-09-2007, 03:58 PM
Personally I would've had at least a good quality 520W+ PSU.

Very likely the strain that that little 400W has been under all that time that it's finally called it quits at trying to keep up with your hardware.

caikmh
12-13-2007, 09:12 PM
HI

i took my p.c to the lab again, the p.c was there for 36 hrs.
when i came there we conected the p.c to power and no beep at all
the p.c was cold after long night without use it)
on same day i called to the lab(evening) and ask the tech to turn on the p.c:no beep'
next day morning the tech turn on the p.c no beep.
so i came to the lab and took my p.c home, turn it on, guess what: a long beep!!
i now have 600 watts ups but i'ts not fixing the problem .
i'm so frustrated please help !!!!

PrairieDawg
12-13-2007, 09:25 PM
An idea: Are the same peripheral components being used at the lab as at home? Have you tried a different mouse, keyboard, and monitor?

caikmh
12-13-2007, 09:36 PM
yes i have try some other devices,
if i did not mention before, the beep caused by the video card !!!
i also replaced the molex conectors&power cable

thanke you

caikmh
12-17-2007, 02:30 PM
hi all !!

few days ago i sended an email to sparkle support, there is the answer:

Dear sir,<o:p></o:p>
YOU vga ‘s fan will beeps if the temp is cold, please heat it a while, then it will ok. Thanks.<o:p></o:p>
<o:p></o:p>
-----Original Message-----
From: Arik [mailto:[email protected]]
Sent: Monday, December 10, 2007 7:18 AM
To: [email protected]
Subject: long beep on startup
<o:p></o:p>
hi<o:p></o:p>
<o:p></o:p>
i own sparkle 8800gts calibre card for few weeks(thp p.c is new.)<o:p></o:p>
in last few days when i turn on my p.c a long beep is occure.<o:p></o:p>
i opened up the case and i found out that the beep came from the the calibre card;<o:p></o:p>
the power cord's are well conected to the card's and the 2 fans are working well,<o:p></o:p>
i try to unplug/plug the card and the same problem remains,<o:p></o:p>
(the long beep occure only when the p.c is cold !!!!!!!<o:p></o:p>
the bip is about 10-15 seconds.<o:p></o:p>
need your help please !!!<o:p></o:p>
<o:p></o:p>
best regards !!<o:p></o:p>

GIGABYTE - Janus Yeh
12-18-2007, 03:48 PM
will you try to rma your sparkle 8800gts ?

caikmh
12-18-2007, 09:33 PM
hi

i guess they will not replace my card because, the beeps did not appear in the
lab,
but if sparkle support will say that it's a problem maybe they wil accept this
and they will replace my card,
i understood from sparkle support answer that its not a problem at all.
the card is only leting me know that the remp are cold!
any way i ask them for a solution,

thank you !


Arik

GIGABYTE - Janus Yeh
12-20-2007, 12:08 PM
8800gt need extra power, did you link the power cable?
or maybe the power slot broken?

caikmh
12-20-2007, 01:54 PM
HI

my card is gts, all cables are well conected,
according to sparkle support: the temp are to low ??? !!!

GIGABYTE - Janus Yeh
12-20-2007, 03:22 PM
Temp are to low ???

I DON'T THINK IT IS A REASON.

Alcsaar
05-24-2008, 11:48 AM
You said the beep is all that happens, vista starts up normally and everything runs?

I wouldn't worry about it if thats the case...you called support for the card and they told you why it did it, it doesn't seem like its an issue, just a informative beep :ponder: