No announcement yet.

RAID on GA-P35C-DS3R with Vista x64

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • RAID on GA-P35C-DS3R with Vista x64

    Hi there!

    I recently bought a Gigabyte GA-P35C-DS3R and I guess I'm one of the lucky ones who doesn't have problems with the "endless reboot" (yet...)

    Well, now to my problem:


    I installed an english version of Vista x64 on my RAID0 volume by putting the GIGABYTE (I use Gigabytes RAID-controller) RAID-drivers on an USB-stick. This went really fine and smooth.


    Later I noticed that I'm from Sweden and would like a swedish version of my OS.
    I got a swedish version of Vista x64 but when trying to install the drivers for the Gigabyte RAID (in the Vista hard drive recognition phase) I get this error message:

    The "yadayada" device driver could not be installed. Contact your vendor for an updated driver.

    Vista DOES recognize the drivers on the USB-stick and chooses the correct one for me but when pressing next the error message appears.
    (You can get a picture of the error message here: http://www.dileno.com/temp/vista_installation_error.jpg (that is NOT my setup or picture thou)


    I thought that there might be a problem with the copy of Vista I got so I managed to get another copy which just resulted in the same problem.




    What's the deal here, why can't my swedish Vista recognize Gigabyte's RAID-driver when the english version does?
Working...
X