Announcement

Collapse
No announcement yet.

.5 Multi Support P35-DS3R?

Collapse
X
Collapse
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    .5 Multi Support P35-DS3R?

    I have got an E8400 on the way, and want to know if my board will support the .5 multipliers. If not, any word on a new BIOS that will?
    i7 3770K, 47X100= 4.7GHz at 1.33V, ASROCK Z77 Extreme4, 2 X 4GB Patriot Viper Black Maba DDR3 1600, GTX 590, 2 X Corsair Force 3 120GB SSDs in RAID 0, Barracuda SATA 7200.10 500GB, Barracuda SATA 7200.11 1000GB Back Ups, OCZ ZX 1250W, Z-5500s, LG Blu Ray Player/DVD Burner, Koolance CTR-CD12 Fan/Pump Controller, Windows 7 X64 Professional, HAF X. Vision Quest 24" WS LCD, Optoma H66 Projector
    Cooling: Thermochill PA120.2 GT AP15 in push, DDC 3.25/XSPC Res top, Apogee Xt Extreme, XSPC Razor, Coolgate CG-240 Swiftech Helix in push/pull, MCP35X.
    Tags: None
  • #2
    Re: .5 Multi Support P35-DS3R?

    Yes it will, by the way, it currently does.

    Comment

    • #3
      Re: .5 Multi Support P35-DS3R?

      Thanks!
      i7 3770K, 47X100= 4.7GHz at 1.33V, ASROCK Z77 Extreme4, 2 X 4GB Patriot Viper Black Maba DDR3 1600, GTX 590, 2 X Corsair Force 3 120GB SSDs in RAID 0, Barracuda SATA 7200.10 500GB, Barracuda SATA 7200.11 1000GB Back Ups, OCZ ZX 1250W, Z-5500s, LG Blu Ray Player/DVD Burner, Koolance CTR-CD12 Fan/Pump Controller, Windows 7 X64 Professional, HAF X. Vision Quest 24" WS LCD, Optoma H66 Projector
      Cooling: Thermochill PA120.2 GT AP15 in push, DDC 3.25/XSPC Res top, Apogee Xt Extreme, XSPC Razor, Coolgate CG-240 Swiftech Helix in push/pull, MCP35X.

      Comment

      • #4
        Re: .5 Multi Support P35-DS3R?

        Originally posted by Qortado View Post
        Yes it will, by the way, it currently does.
        Don't know where this info comes from. I am using BIOS F11, and I cannot set .5 multipliers.
        Anyone else have some info?
        i7 3770K, 47X100= 4.7GHz at 1.33V, ASROCK Z77 Extreme4, 2 X 4GB Patriot Viper Black Maba DDR3 1600, GTX 590, 2 X Corsair Force 3 120GB SSDs in RAID 0, Barracuda SATA 7200.10 500GB, Barracuda SATA 7200.11 1000GB Back Ups, OCZ ZX 1250W, Z-5500s, LG Blu Ray Player/DVD Burner, Koolance CTR-CD12 Fan/Pump Controller, Windows 7 X64 Professional, HAF X. Vision Quest 24" WS LCD, Optoma H66 Projector
        Cooling: Thermochill PA120.2 GT AP15 in push, DDC 3.25/XSPC Res top, Apogee Xt Extreme, XSPC Razor, Coolgate CG-240 Swiftech Helix in push/pull, MCP35X.

        Comment

        • #5
          Re: .5 Multi Support P35-DS3R?

          Originally posted by Capt Proton View Post
          Don't know where this info comes from. I am using BIOS F11, and I cannot set .5 multipliers.
          Anyone else have some info?
          Do you have the "Fine CPU Clock Ratio" option in BIOS ? You need to choose the +0.5 option

          Comment

          • #6
            Re: .5 Multi Support P35-DS3R?

            Originally posted by Qortado View Post
            Do you have the "Fine CPU Clock Ratio" option in BIOS ? You need to choose the +0.5 option
            No. Where did you get your information?
            i7 3770K, 47X100= 4.7GHz at 1.33V, ASROCK Z77 Extreme4, 2 X 4GB Patriot Viper Black Maba DDR3 1600, GTX 590, 2 X Corsair Force 3 120GB SSDs in RAID 0, Barracuda SATA 7200.10 500GB, Barracuda SATA 7200.11 1000GB Back Ups, OCZ ZX 1250W, Z-5500s, LG Blu Ray Player/DVD Burner, Koolance CTR-CD12 Fan/Pump Controller, Windows 7 X64 Professional, HAF X. Vision Quest 24" WS LCD, Optoma H66 Projector
            Cooling: Thermochill PA120.2 GT AP15 in push, DDC 3.25/XSPC Res top, Apogee Xt Extreme, XSPC Razor, Coolgate CG-240 Swiftech Helix in push/pull, MCP35X.

            Comment

            • #7
              Re: .5 Multi Support P35-DS3R?

              I can see it through Awdbedit

              Comment

              • #8
                Re: .5 Multi Support P35-DS3R?

                Well, I guess you're looking at the wrong BIOS. I shall have to wait until a BIOS comes out that supports it. No bigggie though. Why would I want to use 8.5 when 9 is available?
                i7 3770K, 47X100= 4.7GHz at 1.33V, ASROCK Z77 Extreme4, 2 X 4GB Patriot Viper Black Maba DDR3 1600, GTX 590, 2 X Corsair Force 3 120GB SSDs in RAID 0, Barracuda SATA 7200.10 500GB, Barracuda SATA 7200.11 1000GB Back Ups, OCZ ZX 1250W, Z-5500s, LG Blu Ray Player/DVD Burner, Koolance CTR-CD12 Fan/Pump Controller, Windows 7 X64 Professional, HAF X. Vision Quest 24" WS LCD, Optoma H66 Projector
                Cooling: Thermochill PA120.2 GT AP15 in push, DDC 3.25/XSPC Res top, Apogee Xt Extreme, XSPC Razor, Coolgate CG-240 Swiftech Helix in push/pull, MCP35X.

                Comment

                • #9
                  Re: .5 Multi Support P35-DS3R?

                  No, I'm looking at the right file, in fact most Gigabyte P35 with 45nm support have this option.
                  Did you press Ctrl + F1 on the main menu ?
                  Did you look inside MB Intelligent Tweaker(M.I.T.) ?

                  Comment

                  • #10
                    Re: .5 Multi Support P35-DS3R?

                    Did I press Ctrl F1? No. They stopped requiring that to see the advanced settings some versions ago.
                    Did I look in MIT? Yes.
                    I see that tech support is thin on this "Support" site. Will probably go back to a DFI solution soon. Good support on that website!
                    i7 3770K, 47X100= 4.7GHz at 1.33V, ASROCK Z77 Extreme4, 2 X 4GB Patriot Viper Black Maba DDR3 1600, GTX 590, 2 X Corsair Force 3 120GB SSDs in RAID 0, Barracuda SATA 7200.10 500GB, Barracuda SATA 7200.11 1000GB Back Ups, OCZ ZX 1250W, Z-5500s, LG Blu Ray Player/DVD Burner, Koolance CTR-CD12 Fan/Pump Controller, Windows 7 X64 Professional, HAF X. Vision Quest 24" WS LCD, Optoma H66 Projector
                    Cooling: Thermochill PA120.2 GT AP15 in push, DDC 3.25/XSPC Res top, Apogee Xt Extreme, XSPC Razor, Coolgate CG-240 Swiftech Helix in push/pull, MCP35X.

                    Comment

                    • #11
                      Re: .5 Multi Support P35-DS3R?

                      No, even though memory timings will show up in MIT you still need to press CTRL + F1 to access other options inside BIOS, including "Fine CPU Clock Ratio" I guess.

                      Comment

                      • #12
                        Re: .5 Multi Support P35-DS3R?

                        Did you try CrystalCPUID or RMClock ?

                        Comment

                        • #13
                          Re: .5 Multi Support P35-DS3R?

                          Right, you have to still press Cntrl + F1 to see all options. I have not used a .5 multi cpu so I am not sure that is indeed in this bios or not though. Also after you flash to the newest one, go in a select optimized defaults and save and apply then come back in and reset everything, and look for .5 multi

                          Comment

                          • #14
                            Re: .5 Multi Support P35-DS3R?

                            Originally posted by a573573 View Post
                            Right, you have to still press Cntrl + F1 to see all options. I have not used a .5 multi cpu so I am not sure that is indeed in this bios or not though. Also after you flash to the newest one, go in a select optimized defaults and save and apply then come back in and reset everything, and look for .5 multi
                            Where do you get bios F12a ?

                            Comment

                            • #15
                              Re: .5 Multi Support P35-DS3R?

                              It is not there.
                              i7 3770K, 47X100= 4.7GHz at 1.33V, ASROCK Z77 Extreme4, 2 X 4GB Patriot Viper Black Maba DDR3 1600, GTX 590, 2 X Corsair Force 3 120GB SSDs in RAID 0, Barracuda SATA 7200.10 500GB, Barracuda SATA 7200.11 1000GB Back Ups, OCZ ZX 1250W, Z-5500s, LG Blu Ray Player/DVD Burner, Koolance CTR-CD12 Fan/Pump Controller, Windows 7 X64 Professional, HAF X. Vision Quest 24" WS LCD, Optoma H66 Projector
                              Cooling: Thermochill PA120.2 GT AP15 in push, DDC 3.25/XSPC Res top, Apogee Xt Extreme, XSPC Razor, Coolgate CG-240 Swiftech Helix in push/pull, MCP35X.

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X