PDA

View Full Version : Leadtek GF3ti200 query



m-kong
05-23-2002, 07:15 PM
g'days.
heyas,
From your experience with a Leadtek GF3ti200
What would be a reasonable clocking speed, without any additional cooling involved?

m-kong
05-23-2002, 08:09 PM
sorry for wasting your time ill look at the gf3ti200 overclocking thread : (
btw if you guys do clock suggest what addidtional cooling you use
:D

Wiggo
05-23-2002, 08:17 PM
Most, will get the core to around 210-240MHz and the memory to around 490-550MHz in most cases but the Leadtek should be towards the higher of those ranges. :smokin:
<center>:cheers:</center>

m-kong
05-23-2002, 08:19 PM
do you think that the factory heatsink will be enough cooling ?
Even though it is big and shiny :d

Wiggo
05-23-2002, 08:34 PM
For those ranges yes but you can check out the reviews on that particular card and many others right here http://www.8dimensional.com/nVGF3.html :smokin:
<center>:cheers:</center>

m-kong
05-24-2002, 02:43 PM
cheers bud :"D

Albinus
05-24-2002, 03:46 PM
The Leadtek cards I have encountered have been superb overclockers, the GeForce3 TD that I reviewed last year handled 250MHz core and 525MHz memory no problems at all.

You should get at LEAST GeForce3 clock speeds, and some Ti200 cards are reaching speeds that Ti500 cards run at by default :)

Morgan_Lander
05-25-2002, 10:57 AM
Gainward is also pretty good.

FLaCo
05-26-2002, 01:28 AM
Badass link wiggo :D Thanks

Jeremy1482
06-10-2002, 02:59 AM
i get mine to 220\500 and it is very stable and no other colling but case fans
:shoot: :angel: