No announcement yet.

GA-EP35-DS3R rev. 2.1 and G.Skill 1066

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GA-EP35-DS3R rev. 2.1 and G.Skill 1066

    Hi,

    Does anyone else have this board and brand memory and having trouble getting it to run at 1066mhz at 5-5-5-15 timings (which is what this G.Skill is rated for)? I've upped the voltage on the RAM so it now reads 2.1, but I can't get it to run at the stated timings at 1066. Manually setting the timings has no effect, this memory will only run at 5-7-7-20 at 1066 on this board as far as I can tell. Suggestions? TIA...

  • #2
    Re: GA-EP35-DS3R rev. 2.1 and G.Skill 1066

    2GB or 4GB?

    If it is 4 almost all boards have 1066 ram issues, try just above 1066 or just below. And you may need to add .1V or more to your MCH. Do you have a fan on the NB at all? If not I suggest you try to find a 40MM fan to add on there, it will help you run more stable at higher speeds.

    By the way, what is all of your settings? Copy and paste this back and fill it in if you can. Add anything that is missing, and please remove what your Bios does not offer.

    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [XX] <<<----CPU Multiplier
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [266]
    PCI Express Frequency (Mhz)_______ [102]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [2.00]

    DRAM Timing Selectable_______ SPD __ [Manual]
    Memory Performance Enhance__________ [Normal]
    High Speed Dram DLL Option__________[1 Or 2]

    CAS Latency Time_____________ 5 ____ ?
    Dram RAS# to CAS# Delay______ 5 ____ ?
    Dram RAS# Precharge Delay_____5 ____?
    Precharge Delay (tRAS)________15 ____ ?
    ACT to ACT Delay (tRRD)_______4 _____ ?
    Rank Write to READ Delay______3 _____ ?
    Write to Precharge Delay______6 _____ ?
    Refresh to ACT Delay________42 ______ ?
    Read to Precharge Delay_______4 _____ ?
    Static tRead Value_______________ 1-31
    Static tRead Phase Adjust________ 1-31

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V]
    PCI-E OverVoltage Control_ [+0.1V]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [1.25]

    Comment

    Working...
    X