PDA

View Full Version : AGP trouble whith Kryo2



CJ Boons
05-26-2002, 03:58 AM
Can any one help?
I cant get my Hecules 3D prophet 4500 TV out to work in any kind of hevyer aplications.
I tryed drivers and tips form around the web for a month now, but now I saw a per of lines in PCIlist:

AGP transfers
--------------------------------------------------------
The AGP aperture is currently set to 32MB.

The system board supports up to 2X AGP transfers. The graphics card supports up to 2X AGP transfers.

AGP transfers are NOT configured correctly - master and target differs.


--------------------------------------------------------
Sideband addressing
--------------------------------------------------------
The system board supports sideband addressing. The graphics card supports sideband addressing.

Sideband addressing is NOT configured correctly - master and target differs.

AGP transfers are NOT configured correctly - master and target
differs.
--------------------------------------------------------

I cant figure out how to fix this? can any one give me som tips?

HELP!!!!!
:confused:

daedalus
05-26-2002, 09:34 AM
Hmmmmm....thats a bit of a strange one. Maybe your card is set to 4x AGP but your motherboard can't support it. In your motherboards bios, set the AGP transfer speed to 2x if it isn't already, and while your at it, set the AGP appature size to 64mb.

See if that does anything....:confused:

chisholm
05-27-2002, 06:25 PM
yea also if you have sideband-adressing on...disable it...look for in your bios...or tweaking proggy if r using one:cheers: