View Full Version : 12V+ drop to 11.5V+ on BD7-RAID

05-28-2002, 09:42 AM
My 12V+ line has consistently run low on the BD7-RAID motherboard.... tried two different 400W's & a 500W, but it just sits around 11.5V.

Any ideas??? or has anyone else found the same problem???

05-28-2002, 10:39 AM
I think that line is regulated on the board, so changing the PSU won't work. Is it giving you any trouble?

05-28-2002, 10:48 AM
No....none of the PSU's have given any bother at all..... just all read at 11.5 or thereabouts.

05-28-2002, 10:57 AM
It is possible that the probe on the motherboard is a little off. As long as you're not having troubles, then you should be fine. It's not really enough of a voltage drop to be concerned with.

05-28-2002, 11:02 AM
Thanks man.... I wasn't sure how far down the voltage could go before I would actually be having problems, even if I couldn't see them.

Is this something common to BD7-RAID boards, or just mine??

05-28-2002, 11:11 AM
It's common on alot of boards, not just yours.

05-28-2002, 12:52 PM

I guess I'll stop being concerned then and go back to the quieter 400Wpsu.... maybe even a 350W??