winfox and the hardware monitor

[noleafclover01]

hi, im new here and was just wondering, where i could get a version of winfox that actually has the hardware monitor enabled. cos i want to know how much stress i am putting on my vid card. also what would be a suitable level of OCing if i have a leadtek gf3 ti 200 vid card. thanx

jason

[fragman]

If the hardware monitor is disabled then it means that your CARD does not have hardware monitoring (Leadtek often has identical cards with and without monitoring)

[noleafclover01]

k thanx for the help

jason

[fragman]

You can have a look at my guide below to see what I got out of my GF3 ti200:

http://www.tweaktown.com/document.php?dType=guide&dId=249

[Onyx]

If you just bought your card recently, it's unlikely the core will go above 240Mhz even with aggressive cooling. It seems later revisions of the chips dislike high speeds.

[ReSpAwN DeMoN]

I had the same problem I have a Leadtek Geforce 3TDH and was always wondering where to get them at....its underneith the drivers sectino but listed as a separate item called winfox 2.0 here let me get a link for ya

ftp://ftp.leadtek.com.tw/entertainme...x_20_20426.zip