Hi, I am haveing some probs with my Video cards initializeing,
I have made sure that both of them work but, the cards will not work at the same time....
Any Help would be appriciated :)
I have 2 video cards a Geforce 3 AGP, and a Voodoo 5 5500
for some reason for the past month or two I have not been able to get the cards to run both at the same time.....
how do I explain this.....
I have AGP set in bios as the first init display boots up... windows
I get in the GF3 runs, the V5 is detected.... however it gets a Code 10 error...
I reinstall it ... same thing...
If I uninstall the GF3 and the V5 is already installed the V5 will run but the GF3 does not run....
I have tried practically everything I could think of cept updateing my bios again... which its already up to date...
I have updated the V5 bios to the latest 1.18 *supposedly the latest*
Drivers did not make a difference either....
I have reformated lets see .... approx 15 times since i last tried messing with the V5 again....
the one thing that could be the prob but I have not a clue how to fix it is this...
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
IRQ 10 Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)
IRQ 10 HPT370 UDMA/ATA100 RAID Controller
IRQ 10 Intel(r) 82801BA/BAM USB Universal Host Controller - 2444
IRQ 11 NVIDIA GeForce3
IRQ 11 Creative SB Live! series(WDM)
IRQ 11 3dfx Voodoo5
IRQ 12 U.S. Robotics 56K Fax Win
IRQ 12 Intel(r) 82801BA/BAM USB Universal Host Controller - 2442
I/O Port 0x00005000-0x0000FFFF PCI bus
I/O Port 0x00005000-0x0000FFFF Intel(R) 82801BA/BAM SMBus Controller - 2443
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF 3dfx Voodoo5
I am guessing the IRQ 11 is the prob... but I cannot change the IRQ's in Device manager or the Memory address ......
Thanks,
Sir MMPD
I have made sure that both of them work but, the cards will not work at the same time....
Any Help would be appriciated :)
I have 2 video cards a Geforce 3 AGP, and a Voodoo 5 5500
for some reason for the past month or two I have not been able to get the cards to run both at the same time.....
how do I explain this.....
I have AGP set in bios as the first init display boots up... windows
I get in the GF3 runs, the V5 is detected.... however it gets a Code 10 error...
I reinstall it ... same thing...
If I uninstall the GF3 and the V5 is already installed the V5 will run but the GF3 does not run....
I have tried practically everything I could think of cept updateing my bios again... which its already up to date...
I have updated the V5 bios to the latest 1.18 *supposedly the latest*
Drivers did not make a difference either....
I have reformated lets see .... approx 15 times since i last tried messing with the V5 again....
the one thing that could be the prob but I have not a clue how to fix it is this...
I/O Port 0x00000000-0x00000CF7 PCI bus
I/O Port 0x00000000-0x00000CF7 Direct memory access controller
IRQ 10 Linksys LNE100TX Fast Ethernet Adapter(LNE100TX v4)
IRQ 10 HPT370 UDMA/ATA100 RAID Controller
IRQ 10 Intel(r) 82801BA/BAM USB Universal Host Controller - 2444
IRQ 11 NVIDIA GeForce3
IRQ 11 Creative SB Live! series(WDM)
IRQ 11 3dfx Voodoo5
IRQ 12 U.S. Robotics 56K Fax Win
IRQ 12 Intel(r) 82801BA/BAM USB Universal Host Controller - 2442
I/O Port 0x00005000-0x0000FFFF PCI bus
I/O Port 0x00005000-0x0000FFFF Intel(R) 82801BA/BAM SMBus Controller - 2443
Memory Address 0xA0000-0xBFFFF PCI bus
Memory Address 0xA0000-0xBFFFF 3dfx Voodoo5
I am guessing the IRQ 11 is the prob... but I cannot change the IRQ's in Device manager or the Memory address ......
Thanks,
Sir MMPD
Comment