PDA

View Full Version : Welcome to ASRock Technical Support Forum!



Pages : [1] 2

Mr.Tweak
05-04-2010, 12:05 PM
The ASRock Technical Support forum is now open and ready for posts!


When posting questions, please provide as much info as possible such as full system specs, what operating system and drivers you are using and please describe your problem as full as possible.

This is also an area you can discuss upcoming ASRock products and we will also conduct giveaways and competitions in here from time to time as well. ASRock may also share early BIOS updates and drivers with you here as well.

:thumbsup:

Conners
05-04-2010, 11:25 PM
:wavey: Welcome ASRock Sean, Don't know ne-thing about your products, but who knows may try one of your X58 boards... :beerchug:

Lsdmeasap
05-05-2010, 02:16 PM
Welcome to TweakTown Sean!

ASRock TSD - Sean C
05-05-2010, 02:33 PM
Dear all,
It is Sean from ASRock. :Peace!:

I'm so happy to meet you guys in TweakTown.
Hoping you guys can take around in your free time and share anything in here.

If anything I can help, you can give a message to me as well.
I will reply to you ASAP :smilies13

Thanks for your welcome!

Deafty
05-09-2010, 02:29 AM
Thanks for joining.

I have had so much help in tweak town and welcome the new addition of the Asrock Forum.

After finishing my second build with a Asrock p55 pro motherboard (bios ver:2.0) I will be sure to need help with my bios settings.
I will post all details later.

Thanks and Welcome.

m_ani3
06-23-2010, 07:22 PM
Hi sean,
i will be purchasing the asrock 880g extreme 3 motherboard just wanted to confirm a few facts and compatibility issues?

1) will this ddr3 dual channel ram work with the extreme 3
GeIL GV34GB1333C9DC 4GB (2x2GB) PC3-10660 (1333MHz) DDR3 RAM, 1.5v, 2x240-pin DIMMs, Dual Channel, Non ECC Unbuffered, 9-9-9-24, Brushed-Titanium Aluminum Heat Spreader, Lifetime Warranty.

2) I have a his radeon 5770 and was wanting to have dual crossfire, can i use any brand with the radeon 5770 series? or is there a specific brand that will work on this motherboard... sorry just building my first pc..

MattX
08-12-2010, 09:18 AM
I was given a http://images17.newegg.com/is/image/newegg/19-103-677-TS?$S125W$ (http://www.newegg.com/Product/Product.aspx?Item=N82E16819103677&cm_re=7850-_-19-103-677-_-Product)
(31) (http://www.newegg.com/Product/ProductReview.aspx?Item=19-103-677)

AMD Athlon X2 7850 Black Edition Kuma 2.8GHz Socket AM2+ 95W Dual-Core Desktop Processor AD785ZWCJ2BGH - OEM (http://www.newegg.com/Product/Product.aspx?Item=N82E16819103677&cm_re=7850-_-19-103-677-_-Product)

3600MHz
65 nm Kuma
2 x 512KB L2 Cache 2MB L...


Series: Athlon X2
L2 Cache: 2 x 512KB
L3 Cache: 2MB
Manufacturing Tech: 65 nm
Model #: AD785ZWCJ2BGH
Item #: N82E16819103677
The other day from my Techi who was sure itn would work in my PC he built using a Asrock Alive NF6G-DVI as the base motherboard is there anyway at all to get the AM2 socket to read a Am2+ Cpu

adam395
08-13-2010, 10:09 AM
Hi Sean
I'm new to the forum and really do need some help with my ASRock 939A8X-M motherboard and am hoping that you can help in some way. As I posted in the thread at http://forums.tweaktown.com/asrock/40950-newbie-asrock-939a8x-m-windows-7-problems.html I cannot get the 939A8X-M to work under Windows 7. It might be that I simply need new drivers (e.g. for the on board Ethernet port). Any help or advice you can provide would really be appreciated and I'm sorry to use this welcome thread to raise my problem with you however I'm stuck still with these problems now.
Thanks

blairt
08-19-2010, 09:35 AM
Hi all,
I have an Asrock 775 Dual VSTA mother board that I would like to overclock.
To get the FSB up to 1066mhz from 800mhz will require me to adjust the FSB to memory
ratio to suit my pc3200 memory but I can't find this setting in the BIOS.
Does anyone here know how to make this adjustment on these motherboads?
Any help would be greatly appreciated.

mitsiko2k10
08-19-2010, 06:45 PM
Hello anyone would like to answer my inquiry
i am planning to buy the ASrock 890 extreme3
but i saw in there specification on the processor that can support
ASRock > Products > 890FX Deluxe4 (http://www.asrock.com/mb/overview.asp?Model=890FX%20Deluxe4&cat=Specifications)
sad to say that it can support almost the processor except for the 920/940 procie
and i have a amd Phenom ii 940 procie
is there any way so that this board can support my current procie
thx in advance.

z3r0
09-16-2010, 06:00 PM
Hi all. I hope I am in the right place :) I have an old K7NF2-RAID motherboard that I resurrected to use as a lite gaming machine. I have another pc that I use soley for audio work. I flattened the old pc in question and did a fresh install of Win XP Pro. Now when I plug in a usb drive into any of the ports I get usb device not recognised or has malfuntioned. I have installed the all in one drivers for the K7NF2-RAID mobo but have I missed something?

Cheers :bdaybiggr

oncen
09-18-2010, 12:06 AM
Is this thread is dedicated for technical support? With no response so far, I doubt it :nono:

lolarent
09-29-2010, 08:03 PM
Hello Sean,
I've a question :
I have an asrock ion 330 ht and I want to upgrade the hdd from 320G to 2T (2* 1T) without using raid config.
Is it possible because I saw in the asrock doc that there is a limitation of 2 * 500G.
Is it correct ?
Thanks for your answer
Regards
Lola

Juancho3k
10-01-2010, 02:42 AM
Hello, im a newbie here.

Welcome Sean,
I was hopping one of u guys could help me, i have an ASROCK N68S-UCC + Athlon II x2 250 running @ 3.59Ghz (240Mhz OC) :)
My question is i had problems trying to use PCI Ex 2.0 Video cards, with XP and 7, i read that the Nvidia 630 chispet suxs, is there any way to get support or should i discard this Mobo??? I have DDR2 im not planning to get DDR3 in order to buy a M3A785GXH board, it costs the double of mine here on El Salvador, can u help me please?
My Video Card is EVGA 9600 GSO 1GB

SKshooter2
10-07-2010, 10:19 AM
hi how you all doing. i just finished building my system and it,s pretty quick stock but have been trying to oc and have found that i cant change my cpu ratio settings and hope someone can help me with my problem. i,m using the asrock extreme6 motherboard with the i7 980x cpu, patroit sector7 24gb pc3-10666 1333mhz ram in triple channel, sapphire 5970 2gb, 2x 1tb 10,000rpm velociraptors in a raid config and striped, 1200w coolermaster silent pro golld psu, coolermaster v10 cpu cooler, in a coolermaster 932 haf tower. any tips you can give me would help a lot as i understand at this point i am the only one in north america with this motherboard thanks SKshooter2

ildefonso
10-15-2010, 09:56 AM
Hello Guys! Kinda new with this forum thing. Need some urgent help with my Asrock 880GM-LE mobos. After installing the driver using the "Install All" option in the driver CD the Device Manager displays an unknown/unsupported PCI Standard ISA Bridge device! Worst, when I enabled the UCC function of the mobo the display went nuts and eventually the system crashed! Tried assembling another mobo installing a 9500gt PCIE with same results!

Asrock 880GM-LE Bios P1.2-15B, Athlon II X3 440, PQI 2GB DDR3 1333MHz memory, Hitachi 500GB SATA HDD..

johnj
10-21-2010, 05:13 AM
Hello Sean and you guys at TT
My Mobo is GE PRO-M2
Maxtor 40 GB
Jntel celeron D
win xp
after my psu went away, I installed a new one and pressed start.
HDD starts running, and the pickup inside is heard for one second max.
Then quiet, no screen, no POST, nothing.
with or without RAM, different RAM also, no effect.
No beep at all.

Any ideas anyone?
Thanks, John, Denmark

M@ts
10-22-2010, 09:28 PM
Hi
I have an ASRock motherboard M3A790GXH/128M run Win7
with bios P1.30 and have now upgraded to the latest P1.90
seems to work fine, but now the USB boot option is gone.
Which version should I go back to to get the USB option.

Another weird thing P1.30 is missing in your Bios list.

Thanks in advance from Sweden

/ / M@ts

iard09
10-31-2010, 04:03 PM
hello tech support asrock
sir can i request a bios update file(windows) for my motherboard Model ALiveNF7G-HD720p R1.0 and ALiveNF7G-FullHD R1.0 (http://www.asrock.com/mb/overview.asp?Model=ALiveNF7G-FullHD%20R1.0) to run a AM3 processor(AMD Athlon X2 250 3ghz).

thanks
from philippines.

mrsimbo
11-18-2010, 01:20 AM
hi i bought an asrock p43de mobo and it arrived today i have installed it and connected everything up but when i turn the pc on and it tries to load up windows it stops and a screen comes up saying failed to load windows check harddrive for erros i did there was nothing that could be fixed automatically i tried with a different hard drive with a different os on but still no luck i was hoping someone could help me out my system is as follows:

cpu: intel q6600 2.4ghz
hdd: samsung spinpoint 250gb
ram: ocz gold ddr2 4gb
mobo: asrock p43de

if you need any more info please ask i really want to fix this problem

saiph
01-05-2011, 07:29 PM
Hello:
I have that board mentioned whith two hard disks in RAID 1 , If I install win7 or Visa i don´t have any problem but if I try to instal Windows XP x64 i cannot see the disc volume, my pc has not floppy device to install the sata drives from Asrock site, but i tried for several times to change the XP OS with the nLite software adding different sata drives for that board, mainly for nvidia chipset, but always without sucess!
Could you help me please to resolve the problem?
thanks you
Vitor gomes

superdinmo
01-15-2011, 05:05 AM
I

superdinmo
01-15-2011, 05:10 AM
I have 890GX EXTREME 4 what is the better choice AMD Phenom™ II X2 555 3.2GHz Black Edition or AMD Phenom™ II X4 925 2.8GHz i have another question i read the catlouge it written the motherboard cant set up 920 and 940 series is that true or not

Romster
02-10-2011, 11:11 PM
Hi
I wonder if anybody could help me re an issue on my asrock ion 330 ht
running win7 64 bit
I have an unknown device appearing in device manager. I've dpownloaded and updated all the drivers from the asrock site ut it still shows an unknown device in the list of devices any ideas?
cheers

nijel
02-12-2011, 03:38 AM
Hey guys have a simple question.
Does Realtek ALC892 Audio Codec on P67 Extreme6 supports Dolby Digital Live or DTS Connect for single digital audio cable connected to receiver?

pwddad
02-21-2011, 10:03 AM
Help! I have a new Nvidia GeForce 8400GS 256MB DDR2 64-bit graphics card I'm trying to install on my ASRock ConRoe1333-D667 motherboard. When I first installed it and booted up I got nothing on my monitor. I have a Samsung SyncMaster that supports DVI and VGA and up to now I was using only VGA with the onboard graphics (Intel 945GC A2 chipset with Intel Graphics Media Accelerator 950, max shared memory 224MB). When I got nothing with the DVI connection I tried the VGA connection and still got nothing. Then I removed the new Galaxy card and tried reverting to the onboard graphics but now it doesn't work either. Any ideas? I am running Windows 7 O/S 32-bit (hmm, maybe I can't put a 64-bit card in my PCI Express slot?). Lucky I have a second computer to post this problem...

phand
02-21-2011, 01:51 PM
i've bought my p67 extreme4 and red the manual
i'm interested in somewhere in it, there's a header called "ir header"
but i didnt have an ir receiver, so did asrock have it on store?

planning to make my pc to an HDPC

forzamilan
02-22-2011, 12:35 AM
Any advice? Cheers.

http://forums.tweaktown.com/asrock/43294-asrock-880gmh-usb3-boot-problem.html#post385850

Destone
03-03-2011, 07:47 AM
Hello , I am building a system and wanted to ask a compatibility question. I am purchasing the ASRock M3A770DE motherboard and for the processor - I am purchasing a AMD Phenom II X4 840 Deneb. Any information would be appreciated on the compatibility , thank you.

CPU: AMD Phenom II x4 840 Deneb 3.2 Ghz
MB: ASRock M3A770DE AM3 AMD 770 ATX
RAM: Kingston 4GB DDR3 SDRAM 1333
HDD: WD Caviar Blue 500GB 7200 RPM SATA 3.0Gb's
PSU: Antec BP550 plus 550W
VIDEO: Radeon HD 4850 1G 256bit DDR3

singinwolf
03-06-2011, 07:56 PM
Mr. Tweak,
What good is it to have a tech support forum and tech support people if none of them will answer tech support questions and/or help with problems. I glad your the boss man of this section of the site. I would suggest that you pass on to the tech support dept that they do their job and help their customers. I have a new board that I am having issues with and can't get any help with from them and I'm a bit frustated. :angryfire Just to let you and ASRock know I will be sending the board back and getting one from a different manufacture that has tech support.

Glad your here to receive the rant.
Singinwolf

Mardy
03-07-2011, 05:14 PM
Hi Mr Tweak.

I am in need of your assistance as I am totally clueless even after searching the web for an answer but have had nothing definate.
I have an Asrock ALIVENF6G-VSTA motherboard in my PC and have an AMD Athlon 64 X2 5600+ AM2 cpu which I am looking to upgrade.
I know that the motherboard is AM2 but have read it may be able to use AM2+ cpu's and was wondering if that was so? Some web sites said that some boards could use AM3 but I am sceptical about that myself.
If so, would I be able to use this in it AMD CPU Athlon 64 x2 7850 Black Edition Dual Core Processor - Manufacturer code AD785ZWCJ2BGH?

Any help would be gratefull as I am not very clued up PC wise.

Thank you :)


PC Spec's are as follow's incase that helps :)

CPU: AMD Athlon 64 X2 5600+ AM2
Motherboard: Asrock ALIVENF6G-VSTA
Memory: 4.0GB Kingston DDR2 667mhz (4x 1GB)
Hard Drives: 250GB S-ATAII 3.0Gb/s
Graphics card: NVidia GeForce 8800GTS 640MB
Operating System: Microsoft Windows 7 Professional
CPU Cooler: Thermaltake Golden Orb II
PSU: 700w

ukiy
03-11-2011, 08:17 AM
Hi,

I have 890GX Extreme3 MB which has following error at start:

"1394 GUID are invalid in both CMOS and Flash! Press F1 to Resume"

Flashing bios does not help and the 1394 is required.

Is there any way to fix this?

Thanks

singinwolf
03-12-2011, 04:05 PM
Ukiy,
Sorry to hear about the issue. I gave up after a week of waiting for a reply and that was two weeks ago and sent my board back to NewEgg. Hope you can do likewise.

ukiy
03-12-2011, 07:07 PM
Problem solved on my one in the meantime! =)
If any1 else have the same problem here (http://www.upload.ee/files/891702/1394id.zip.html?msg=sess_error) is a tool to fix it.

NOTE: GUID number (yellow sticker) for this MBO (890GX Extreme 3) is located on the last PCI slot.

btw, ASRock Technical Support sucks!

singinwolf
03-12-2011, 07:18 PM
ukiy,
What tech support. As I said I have email used forums etc. There is no tech support!!!!!! The boards might look good and might have good features but if you can't get problems solved or any tech support if you have an issue how good is the product?:ponder: I look at it like this if I have to send the board back out of warranty how do I get an RMA etc.

pete_denz
03-15-2011, 07:26 PM
Is anyone aware of whether the AMD Phenom II X4 840 3.2 GHz 95 W Propus quad-core CPU is compatible with the ASRock N68-S UCC?

That particular CPU does not appear on the official ASRock list for this motherboard but I would be surprised if it was not compatible since it is so much like the AMD Athlon II X4 645 3.1 GHz 95 W Propus quad-core CPU that is compatible.

matsumuratensho
03-17-2011, 10:30 PM
Good day everyone,im new here,this is the only good Asrock forums that i can find,i just hope its worth posting here :yawn:

i just bought my Asrock 890GX Extreme3 mobo last february as a part of building my rig step by step,so i got my new Mobo,Procie,PSU and everything else except the video card. Now i want to be careful in buying a video card.Since my mobo is a CrossfireX ready mobo,im planning to use its capability.My PSU also is a CrossfireX ready,so i think everything is good to go,so im down on choosing the right Video Card for CrossfireX.The Asrock website provided a list of CrossfireX video cards compatible for 890GX Extreme3 mobo.But it looks like limited,it only listed 7 video cards ASRock > Products > 890GX Extreme3 > CrossFire Support List (http://www.asrock.com/mb/vga.asp?Model=890GX%20Extreme3&c=CF)

So my question is are those the only compatible video cards for CrossfireX in 890GX Extreme3 mobo? Will it be ok to use other Video Cards for CrossfireX aside from those that are mentioned in the list?

alan1476
03-19-2011, 01:50 AM
I live in the USA, where can I buy a REVB3 Fatal1ty one Pro P 67 mobo? Cant find one anyplace for any price.

Hawkster13
03-22-2011, 03:47 AM
I live in the USA, where can I buy a REVB3 Fatal1ty one Pro P 67 mobo? Cant find one anyplace for any price.

You can buy that board here. This site used to be ewiz.com.
FATAL1TY P67 PROFESSIONAL B3 ASRock Fatal1ty P67 Professional B3 LGA1155/ Intel P67 B3/ DDR3/ Quad CrossFireX & Quad SLI/ SATA3&USB3.0/ A&2GbE/ ATX Motherboard - Motherboards - Intel - SuperBiiz.com (http://www.superbiiz.com/detail.php?name=MB-FAP67B3&title=ASRock-Fatal1ty-P67-Professional-B3-LGA1155-Intel-P67-B3-DDR3-Quad-CrossFireX-Quad-SLI-SATA3-USB3-0-A-2GbE-ATX-Motherboard)

Good luck with the shopping :)

Hawkster13
03-22-2011, 03:51 AM
Good day everyone,im new here,this is the only good Asrock forums that i can find,i just hope its worth posting here :yawn:

i just bought my Asrock 890GX Extreme3 mobo last february as a part of building my rig step by step,so i got my new Mobo,Procie,PSU and everything else except the video card. Now i want to be careful in buying a video card.Since my mobo is a CrossfireX ready mobo,im planning to use its capability.My PSU also is a CrossfireX ready,so i think everything is good to go,so im down on choosing the right Video Card for CrossfireX.The Asrock website provided a list of CrossfireX video cards compatible for 890GX Extreme3 mobo.But it looks like limited,it only listed 7 video cards ASRock > Products > 890GX Extreme3 > CrossFire Support List (http://www.asrock.com/mb/vga.asp?Model=890GX%20Extreme3&c=CF)

So my question is are those the only compatible video cards for CrossfireX in 890GX Extreme3 mobo? Will it be ok to use other Video Cards for CrossfireX aside from those that are mentioned in the list?

Hi,

Thats a relatively new chipset/motherboard. It will support any new PCI-Express video card without any problems. Like for the example the ATI/AMD 5870 or 6970 and so on.

Game on! Hehe

Hawkster13
03-22-2011, 03:57 AM
Is anyone aware of whether the AMD Phenom II X4 840 3.2 GHz 95 W Propus quad-core CPU is compatible with the ASRock N68-S UCC?

That particular CPU does not appear on the official ASRock list for this motherboard but I would be surprised if it was not compatible since it is so much like the AMD Athlon II X4 645 3.1 GHz 95 W Propus quad-core CPU that is compatible.

It should work fine. Just make sure you update your motherboard's bios to the newest one.

alan1476
03-22-2011, 03:58 AM
Thanks Hawkster13, have you ever done business with them before?, I usually shop at the EGG.

Hawkster13
03-22-2011, 04:08 AM
Hi Mr Tweak.

I am in need of your assistance as I am totally clueless even after searching the web for an answer but have had nothing definate.
I have an Asrock ALIVENF6G-VSTA motherboard in my PC and have an AMD Athlon 64 X2 5600+ AM2 cpu which I am looking to upgrade.
I know that the motherboard is AM2 but have read it may be able to use AM2+ cpu's and was wondering if that was so? Some web sites said that some boards could use AM3 but I am sceptical about that myself.
If so, would I be able to use this in it AMD CPU Athlon 64 x2 7850 Black Edition Dual Core Processor - Manufacturer code AD785ZWCJ2BGH?

Any help would be gratefull as I am not very clued up PC wise.

Thank you :)


PC Spec's are as follow's incase that helps :)

CPU: AMD Athlon 64 X2 5600+ AM2
Motherboard: Asrock ALIVENF6G-VSTA
Memory: 4.0GB Kingston DDR2 667mhz (4x 1GB)
Hard Drives: 250GB S-ATAII 3.0Gb/s
Graphics card: NVidia GeForce 8800GTS 640MB
Operating System: Microsoft Windows 7 Professional
CPU Cooler: Thermaltake Golden Orb II
PSU: 700w

With an updated motherboard bios. The cpu you're planning on buying will run fine on that board.

AM3 CPU will not work on that board.

Good luck! :)

Hawkster13
03-22-2011, 04:13 AM
Thanks Hawkster13, have you ever done business with them before?, I usually shop at the EGG.

You're welcome.

I have bought from them when they were ewiz.com still. Didnt have any problems at all.
Never bought from them with their new name Superbiiz.com

But the company is still a highly rated online store. Check the store rating here: SuperBiiz / ewiz.com / newbiiz.com - superbiiz.com/ - Reviews, Ratings and Prices at ResellerRatings (http://www.resellerratings.com/store/eWiz)

A 9.29 out of 10. So buy with confidence!

Hawkster13
03-22-2011, 04:17 AM
Hello , I am building a system and wanted to ask a compatibility question. I am purchasing the ASRock M3A770DE motherboard and for the processor - I am purchasing a AMD Phenom II X4 840 Deneb. Any information would be appreciated on the compatibility , thank you.

CPU: AMD Phenom II x4 840 Deneb 3.2 Ghz
MB: ASRock M3A770DE AM3 AMD 770 ATX
RAM: Kingston 4GB DDR3 SDRAM 1333
HDD: WD Caviar Blue 500GB 7200 RPM SATA 3.0Gb's
PSU: Antec BP550 plus 550W
VIDEO: Radeon HD 4850 1G 256bit DDR3

Hi,

I see that your post is 2 weeks old. In case you haven't received an answer for your question yet. Let me help you out.

That CPU will work fine with that motherboard. Just update your motherboard to its newest Bios and you will be up and running.

alan1476
03-22-2011, 07:09 AM
You're welcome.

I have bought from them when they were ewiz.com still. Didnt have any problems at all.
Never bought from them with their new name Superbiiz.com

But the company is still a highly rated online store. Check the store rating here: SuperBiiz / ewiz.com / newbiiz.com - superbiiz.com/ - Reviews, Ratings and Prices at ResellerRatings (http://www.resellerratings.com/store/eWiz)

A 9.29 out of 10. So buy with confidence!
You are the best, thanks for all your feedback.

Hawkster13
03-22-2011, 07:48 AM
You are the best, thanks for all your feedback.

Always welcome. Let me know if you need anything else.

stillbrew
03-27-2011, 07:23 PM
Hi , i have an Asrock 880GXH/USB3 mb, it works great, except i cant get any sound, i have tried un-installing the realtek drivers etc and letting windows re-install after rebooting still no good, even though windows/Realtek software shows everything is working ok?

Any ideas?

Hawkster13
03-28-2011, 12:47 AM
Hi , i have an Asrock 880GXH/USB3 mb, it works great, except i cant get any sound, i have tried un-installing the realtek drivers etc and letting windows re-install after rebooting still no good, even though windows/Realtek software shows everything is working ok?

Any ideas?


Hi Stillbrew,

Please make sure you have connected your speakers into the green connection of the sound card.

Also what operating system are you using?

stillbrew
03-28-2011, 01:36 PM
Hi Hawkster13, i have the speakers plugged into the green socket(tried all the others too!), running win7 ultimate

Hawkster13
03-29-2011, 08:59 AM
Hi Still,

Download and give these new drivers a try. I kinda doubt that drivers is your problem atm. But I can be wrong.
Realtek (http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false)

Keep us updated. :)

adastra
03-29-2011, 11:41 AM
Hello,

Will ''Mushkin Enhanced Silverline 4gb (2x2gb) 240-Pin DDR3 SDRAM 1600 (pc3 12800)''
work properly on a ''P67 Extreme4'' board?

Thanks in advance.

zhaotwins
03-29-2011, 06:55 PM
My Ultra low vlotage AMD Atholon II 170u won't work correctly on my M3A785GXH, do you have a beta BIOS that can solve this problem? It seems that Asrock hasn't prepared any bios for AMD xxxu series ultra low voltage CPU yet.

stillbrew
03-30-2011, 12:16 AM
Hi Still,

Download and give these new drivers a try. I kinda doubt that drivers is your problem atm. But I can be wrong.
Realtek (http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false)

Keep us updated. :)

Hi Hawster, no luck already tried them, but i have got sound now, i brought a usb sound adaptor and it works, bit dissapointed in Asrock though, i have used there mobo for the my last 3 pcs with no problems

Hawkster13
03-30-2011, 06:58 AM
Hello,

Will ''Mushkin Enhanced Silverline 4gb (2x2gb) 240-Pin DDR3 SDRAM 1600 (pc3 12800)''
work properly on a ''P67 Extreme4'' board?

Thanks in advance.

Hi Adastra,

The ram should work fine on the Asrock P67 Extreme4 as it is a P67 compatible ram.

Hawkster13
03-30-2011, 07:01 AM
Hi Hawster, no luck already tried them, but i have got sound now, i brought a usb sound adaptor and it works, bit dissapointed in Asrock though, i have used there mobo for the my last 3 pcs with no problems

Hi Still,

Oh ok, well thanks for keeping me up to date. Just for fun, lets try your sound card one last time.
Please go to this link and download and run Microsoft Fix it and also follow the instructions.

Please let me know if you tried it one last time.

Romario Wright
04-08-2011, 02:01 PM
im have a AsRock Wolfdale1333-D667 motherboard...is there a sound driver available for it in WINDOWS 7,because i have trying to find one... if any,where can i find it??plzz

marinoslb
04-09-2011, 09:32 PM
I have installed an Asus U3S6 controller card on my Asrock H55 PRO moatherboard. Installation went smoothly, but when I connect a 1 TB SATA3 Seagate Barracuda HDD the system freezes when loading Window XP. In BIOS the HDD is recognised Ok as AHCI.
I'm still runnin the original motherborad BIOS 1.00; should I upgrade to the new 1.4?

Hawkster13
04-12-2011, 11:35 AM
im have a AsRock Wolfdale1333-D667 motherboard...is there a sound driver available for it in WINDOWS 7,because i have trying to find one... if any,where can i find it??plzz


Hi Romario,

Try this driver out. Just download the Windows 7 one.
Realtek (http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false)

Please keep me updated.

Hawkster13
04-12-2011, 11:45 AM
I have installed an Asus U3S6 controller card on my Asrock H55 PRO moatherboard. Installation went smoothly, but when I connect a 1 TB SATA3 Seagate Barracuda HDD the system freezes when loading Window XP. In BIOS the HDD is recognised Ok as AHCI.
I'm still runnin the original motherborad BIOS 1.00; should I upgrade to the new 1.4?

Hi Marinoslb,

I would update the Bios.

After that download the newest drivers for your Controller Card.
Link:ASUSTeK Computer Inc. - Motherboards- ASUS U3S6 (http://www.asus.com/Motherboards/Accessories/U3S6/#download)

Ranelar
04-14-2011, 04:53 PM
I own the Extreme6 intel p67 motherboard. The manual says to use PCIE2 and PCIE4 for SLI, but I have the Galaxy 480 GTX Super OC which takes up 3 lanes, so I would have to use PCIE2 and PCIE5. My question is whether it would still run in x8/x8? All references to PCIE5 are regarding using 3 video cards and the fact that PCIE5 would run as x4. Thanks.

chalky87
04-17-2011, 11:03 PM
Hi guys, i am a noob and really need a bit of advice.

I have recently purchased a tower with X4 AMD 640 QUAD CORE in it, and was wondering:

When it boots up, should the (properties) in (my computer) say 783MHz then sometimes 1.81GHz then moves up to 3.01GHz??

It has oc tuner, and i thought the processor speed should stay the same in (my computer), (properties) of the processor??

Chalky

Cigaro1
05-10-2011, 03:58 PM
Hi Sean,
I have this board ConRoe1333-D667 R2.0,
Link to support page is here
ASRock > Products > Motherboard > ConRoe1333-D667 R2.0 > Download (http://www.asrock.com/mb/download.asp?Model=ConRoe1333-D667%20R2.0&o=BIOS)

I have recently installed 4GB of RAM, and updated the BIOS to 1.9, in all parts of the BIOS it says its using 1.9, however in windows it says I have 4GB of RAM installed but only 3.2 usuable.

I think its to do with the BIOS as everytime I did the update through windows, as the computer reset when the BIOS came up it said CMOS CHECKSUM BAD but I proceeded with the rest of the stages to update anyway. The BIOS updated in some way as it now says its using 1.9, but i still cant get it too use the full 4GB of RAM any advice

Thank you

Ranelar
05-10-2011, 04:07 PM
Hi Sean,
I have this board ConRoe1333-D667 R2.0,
Link to support page is here
ASRock > Products > Motherboard > ConRoe1333-D667 R2.0 > Download (http://www.asrock.com/mb/download.asp?Model=ConRoe1333-D667%20R2.0&o=BIOS)

I have recently installed 4GB of RAM, and updated the BIOS to 1.9, in all parts of the BIOS it says its using 1.9, however in windows it says I have 4GB of RAM installed but only 3.2 usuable.

I think its to do with the BIOS as everytime I did the update through windows, as the computer reset when the BIOS came up it said CMOS CHECKSUM BAD but I proceeded with the rest of the stages to update anyway. The BIOS updated in some way as it now says its using 1.9, but i still cant get it too use the full 4GB of RAM any advice

Thank you

You need to be running a 64-bit version of windows for your computer to "see" more than 3.2 GB of RAM.

Cigaro1
05-10-2011, 07:39 PM
You need to be running a 64-bit version of windows for your computer to "see" more than 3.2 GB of RAM.
Haha I should of mentioned what windows im running, Its currently Windows 7 Ultimate 64bit. Its definitly something with the BIOS as I boot up the BIOS window that shows you what hardware is running only says 3200KB. However if I go in to the BIOS setup it says there is 4GB so I am guessing somewhere the motherboard or BIOS aren't talking properly

Thanks for the quick reply though

devilpriest
05-13-2011, 01:24 AM
I have a problem with an Asrock P45XE and an E8500. The problem is the reported fsb. In bios it shows fsb 333 but in windows and any other programs like CPU-Z, 3d mark etc, it shows 328 fsb. The same with 400 fsb (it shows 395). Is there something I'm missing, a setting in bios or sth? Pls help.

devilpriest
05-14-2011, 03:47 PM
Haha I should of mentioned what windows im running, Its currently Windows 7 Ultimate 64bit. Its definitly something with the BIOS as I boot up the BIOS window that shows you what hardware is running only says 3200KB. However if I go in to the BIOS setup it says there is 4GB so I am guessing somewhere the motherboard or BIOS aren't talking properly

Thanks for the quick reply though

You should look for a setting in the Bios, under 'Chipset configuration', it should say 'Flexibility' and that has to be enabled. I had the same problem with my P45xe and 4gb (2x2gb) DDR and it work after enabling that.

zujko
05-15-2011, 03:28 AM
Hi, i have a problem, my system is:
i7 2600k, Asrock P67 Extreme6(latest firmware.1.60)
Corsair TX 650, Ati 5450, ssd ocz vertex3, 6GB ddr3 1333MHz(1x2 gb, 1x4gb kingmax)
CM 690, Win7 x64 home premium.
0xE1 means S3 Boot Script execution
Is there a solution for that?
I was testing my computer and I went to sleep mode. Than I again started the computer, but motherboard is constantly restarting and it shows 0xE1 (Dr.Debug codes).
Is there anybody with that problem, and can you tell me the solution of problem?
Thank you very much

dean1
05-15-2011, 04:26 AM
just bought x58 extreme 6 from new egg were can i go to all the latest drivers.

in the gigabyte forums there is a sticky for all current drivers can we get something like this for asrock boards.

python
05-20-2011, 09:34 PM
hello, i have a asrock p67 extreme 4 running bios 1.7, i have my i2500k clocked at 5 ghz and im getting a double or triple boot problem....i have 2 error codes of 60 and F1. any ideas on what this is and how to fix it....i realize the forced recovery and dxe core started in the manual..but, i dont quite understand the issues at hand and how to fix them..thank you for ur time

BloodMoney
05-20-2011, 09:44 PM
One Voltage problem with my 890 GX extreme 3 mainboard. As I've mentioned, I own this mainboard, toghether with phenom 2 955 cpu. The problem is the Vcore, even I set it manually at 1.35 the bios and other programs it shows me working at 1.392. To make it for real to work at 1.35 I haft to set it at 1.3125. How can I solve this, is there any bios setting I haft to make in order to function properly? Thank you.

hacgiay87
05-21-2011, 11:56 AM
When posting questions, please provide as much info as possible such as full system specs, what operating system and drivers you are using and please describe your problem as full as possible

python
05-21-2011, 09:08 PM
asrock extreme 4 (p67) bios 1.7
i2500k @ 5ghz
8 gbs of gskill 1600 pc 12800 ram @1866mhz (2x4gbs)
evga gtx 570
silverstone 1200 watt power unit
seagate 250 gb internal sata 2 hard drive (3gbs)
getting error codes 60 and F1...dual(triple) boot issue

devilpriest
05-22-2011, 04:28 AM
I have a problem with an Asrock P45XE and an E8500. The problem is the reported fsb. In bios it shows fsb 333 but in windows and any other programs like CPU-Z, 3d mark etc, it shows 328 fsb. The same with 400 fsb. Is there something I'm missing, an option or sth? Pls help.


my specs:
CPU: E8500 E0 3.16GHz (FSB1333)
MB: AsRock P45XE
GPU: nVidia GTX460 1GB (800/2000)
RAM: 2x2GB DDR2(800) Dual Channel kit 5-5-5-15 GEIL
PSU: Nexus 650W
HDD: 1TB WD Black SATAII + 2TB WD Green SATAIII

my bios settings:
ImageShack® - Online Photo and Video Hosting (http://img707.imageshack.us/i/img0107bg.jpg/)
ImageShack® - Online Photo and Video Hosting (http://img809.imageshack.us/i/img0108ci.jpg/)
ImageShack® - Online Photo and Video Hosting (http://img695.imageshack.us/i/img0109bs.jpg/)
ImageShack® - Online Photo and Video Hosting (http://img508.imageshack.us/i/img0110j.jpg/)
ImageShack® - Online Photo and Video Hosting (http://img685.imageshack.us/i/img0111wd.jpg/)

python
05-22-2011, 08:54 PM
thought maybe i could get some help here..well anyways i figured it out..it was my ram timings causing the issues,triple boot codes 60 and f1 are now gone...set my ram to 1600 and all on auto and running my cpu at 5 ghz

casper00735
05-25-2011, 06:20 AM
Hi I am new here just registered. I have a little problem. just brought a new motherboard g31m vs2 ASROCK. Going to instal the system panel header and notice that the cables are different. Let me explain: on the panel there are 9 pins and one is blank (the one on top of dummy) my case have the following cables

reset sw -orange/white
power led - green/blank/white
hdd led - red/white
power sw - black/white

the power led has 3 slots in which does not fit on the system panel header. My question is can the power led be change with a plug with 2 slots. which is the positive cable, the color one or the white cable. Please help

thank you
F. colon

bobdavisnpf
05-28-2011, 04:00 AM
Hi,

I'm working on getting Win7 64-bit going with onboard HDMI audio. I got to the point where HDMI video works with no audio. I have not plugged in any audio cables, just the HDMI cable (which is going to a Sony Bravia HDMI port verified working for video & audio).
In ASRock BIOS setup:
I enabled Onboard HDMI HD Audio but not Onboard HD Audio and got no sound, no audio devices.
I enabled both Onboard HDMI HD Audio and HD Audio and got lockup behavior.

On boot-up it offers the login screen, user successfully logs in, I hear a Windows welcome sound, then Windows mouse locks up. Ctrl-alt-del still works to get to task-manager, where tab works to get to shutdown.

H55M Pro P2.20
Core i3 540 no OC
16GB DDR3_1333 RAM
CPU Ratio Setting (23) [Auto]
Enhanced Halt State C1E enabled
Intel VT Tech Disabled
CPU Thermal throttling Enabled
No-Execute Disabled
Hyperthreading Enabled
Active cores All
A20M Disabled
Speedstep Enabled
C-State Enabled
C6 State Enabled

Primary Graphics Adapter Onboard
Share Memory Auto
DVMT Mode Select DVMT Mode
DVMT/FIXED Memory Maximum DVMT
Onboard HD Audio Enabled
Front Panel Auto
Onboard HDMI HD Audio Enabled
Onboard LAN Enabled
Onboard 1394 Disabled

Serial, IR, Parallel ports disabled
PS/2 port type Keyboard

USB Controller Enabled
Legacy USB Support Enabled
USB 2.0 rate matching hub Enabled

SATA 200GB HD 1st boot device
SATA DVD 2nd boot device
PS/2 keyboard
USB mouse
HDMI cable verified good, connecting to Sony Bravia HDMI port also verified good for Video+Audio
Windows 7 64-bit, new install 5/26/11, patched to current
ASRock updated inf package installed

Any suggestions for next steps greatly appreciated.

Thanks!
Bob

bobdavisnpf
05-29-2011, 01:27 AM
Tried onboard USB port next to PS/2 port, this one is working. No idea why the front-panel USB port works ok with sound disabled and fails with sound enabled.

cabdik
06-01-2011, 01:45 AM
hi guys. nice to meet you. i have a small problem with my system and i hope someone could give me a solution, if there is any!
my system is
cpu Phenom X3 720 BE unlocked to X4 B20
MB AOD790GX/128M
RAM Kingston HYPER X 4x1GB 1066Mhz
HDD 2xWD6400AAKS RAID 0
VGA Sapphire 5850 Xtreme 1GB DDR5

i recently bought this 5850 (previously had a Sapphire 4850 512MB DDR3) and have a problem since i put it in my system. in cold boot the vga doesn't work.., although the fan works 100%. it only happens in cold boot. i close the PSU from its power button, press the start button to discharge the sytem, and then everything runs fine, the system works normally!!! i can restart the system without problem, i don't have BSOD-GSOD, no freezes, nothing.
at first i thought it could be the PSU - i had a 500W CHIEFTEC- so i changed it with a Silverstone 600W, but nothing changed! i put everything in default, in BIOS, nothing changed! i put 4 different vga drivers, there i had a few BSODs, nothing else changed!

reading in some forums that had the same problems, with me, i read somwhere that a guy with an ASUS mobo (785 chipset, can't remember the model exactly) sent an email to asus, and they fixed the problem with a new BIOS...!

what do you think?

alan1476
06-05-2011, 09:08 PM
Hi AsRock support,
I dont know if this is something that a BIOS update can fix, so I am up in the air about RMAing my motherboard, its the P67 Fatal1ty One Professional , when the BLCK is set to 100, CPU-Z says its set to 99.8, that in itself is not so earth shattering , but the volts and amps are not correctly displayed. yes I bought a brand new Corsair 850W AX Modular PSU, tested it in another system so I know it works properly, but the AsRock board does not display it properly in the BIOS, so I am hesitant to belive anything in the BIOS now. I am using the latest 1.80 BIOS and have tried the beta 1.84 with no results that fix my problem. I know I am not the only person with these problems that has this board, if you use google you will see that. My problem is that I am 70 years old and this computer was built by a friend on the west coast, yes it cost 100 to ship it to me. And yes I have the receipt from the vendor that he bought the motherboard from. But its not in my name, so it would have to be RMAd to him and then I would have to ship the box back to him for installation and back again to me after the RMA was complete, this would cost as much as new board. If there is a support number or e-mail that will return my e-mails I would love to have it, because so far I have recieved no response from ASRock.

Bluey
06-10-2011, 06:24 AM
Hi
I have just purchased an ASRock Z68 Extreme 4 and am having problems installing Windows 7 64-bit. A little background - I have 2 X WDC Caviar Green 2Tb SATA 3 discs that I want to use in a RAID 0 array. I have a 60Gb OCZ Agility 3 SATA 3 SSD that I eventually want to use as a front-end cache to the the RAID 0 array via the Intel Smart Response technology.

I can successfully install Windows 7 on a single disk in IDE Mode. When I try to use RAID mode the installation fails. It starts out alright but falls over with an error that says it can't complete the installation on this hardware configuration. When I had a successful IDE installation I managed to update the BIOS to EUFI 1.3.

One other problem I have is that when I run the ASRock utility disk before Windows installation it offers me the option to copy RAID drivers to the floppy disk. The only problem is I don't have a floppy disk drive and haven't had one on a PC for at least five years.

Any thoughts about where I might go from here? is there any way at boot level to get the system to recognize a USB flash drive?

alan1476
06-10-2011, 06:38 AM
Hi I am not AsRock support, but have you used those SSDs before? I think it might work using the secure erase feature on the OCZ Toolbox but you need to have another PC with window 7 to do that or do it in Linux. That board is suppossed to be a good a one from what I have read. I really hope you get a responce from AsRock because they never answered my post . Have you tried an Install in ACHI Mode? Then install the raid drivers from the Asrock site.

burnerchief
06-15-2011, 03:23 AM
hi there

i have a problem with a H67M-GE/M/ASR board

first a bought in februari a H67M-GE RGVSA board too bad the sandy bridge chipset wich gave the sata 300 problem that stopt working after a few weeks.

tried a swap for a new board (tip! look out with the travel protect shield for the processor connector it wreckt a pin and now its up for coulance rma instead of a simple swap grrrrr)


ended up with buying a new one for the time beeing same board but with the improved sandy bridge.

BUT i use a ocz ssd 120gb 300 vertex2 worked like a charm on the old board on the 600 slot no problems.
the second sata 300 hard disk worked also fine on the 600 slot.
dvd drive on 300 slot (wich stopped working after a few weeks)

on the new board with cold boot the ssd is not recognised by the bios and a boot fail.
go into bios end reboot ssd is found
setting boot options like it should and warm boot works like a charm
till next cold boot..........

putting the ssd alone on the 600 slot same problem.
putting the ssd on the 300 slot and the hdd on 600 slot no boot
putting all on the 300 slots problem solved.

my question from rain in drop? cannot use the 600 slots in this way...
on the 600 slot the ssd is a bit faster

ahci enabled
bios version 1.40
ssd bios 1.33
win7 ultimate
use onboard video of the i5-2500k
4gb dd3 1333 dual channel kit

alan1476
06-15-2011, 03:32 AM
PuT SSD in in Port 0.

burnerchief
06-15-2011, 05:28 AM
PuT SSD in in Port 0.

thanks for reply but been there done that no go, not in port 0 or 1

bios does not see the ssd at cold boot in port 0 or 1

alan1476
06-15-2011, 05:47 AM
Are you sure you initalized the SSD? Did you reinstall the OS when you changed Boards? Sometimes with SSDs they have to be erased by a special program before you can reinstall the OS again.

burnerchief
06-15-2011, 05:51 AM
Are you sure you initalized the SSD? Did you reinstall the OS when you changed Boards? Sometimes with SSDs they have to be erased by a special program before you can reinstall the OS again.

yes i initalized the ssd and reinstalled the os just to be certain seems to be a slot problem
seems also i am not the only one with issues with sata ports

http://forums.tweaktown.com/asrock/44555-asrock-p67-extreme-4-issue-sata3-ports.html

gorgeto
06-15-2011, 06:09 AM
Hello There
im glad that i found this forum
i have motherboard AsRock M3N78D
so i need sata2 driver(WINDOWS 7 64BIT) for raid mode
i'm not familiar with this stuff so i want my hdd to work faster
thanks and big regards

Tibetan
06-18-2011, 02:57 PM
Hello!

I have a Fatal1ty Pro 67 boards and a Auzentech 7.1 Bravura soundcard with the latest driver. One PCI-E slot Windows7 Pro64 fail to see the sound card, so the driver did not go up. The sound card is good. What is wrong? I need help fast!

Thank you!

alan1476
06-18-2011, 08:06 PM
Try a different slot. I bet that works, and also make sure you enable Plug and Play in the bios.

Tibetan
06-18-2011, 09:14 PM
Thanks for the reply.
I tried all the PCI-E slots, none detected - but the sound card has worked with other mobo. Anyway, I tried an Extreme 4 mobo, there does not work. :(
Thanks!

Tibetan
06-18-2011, 09:25 PM
The Fatal1ty Pro P67 motherboard UEFI-in, there is no menu to "plug and play". : (

alan1476
06-18-2011, 10:55 PM
Hmm, you are probably right, I thought I remembered one in the Advanced Tab, but I could be wrong. What mode are you in> IDE, ACHI, Raid? The Extreme4 Z68 should be in ACHI for most new setups. Maybe its a compatibility problem? Does it work with other motherboards? I still think the Z68 Extreme4 is the best bang for the buck with the LGA 1155 boards. It overclocks, it needs no graphics card unless you are an extreme gamer, I am a trancoder and the quick synch feature was enough to sell me this board with a 2600K. I am only running 8gbs of DD3 Corsair 1600mhz memory and with USB3 and all the other features this board rocks.

Tibetan
06-18-2011, 11:01 PM
I have ACHI mode... :bawling:

nagyodon
06-19-2011, 04:18 PM
The ASRock Technical Support forum is now open and ready for posts!

Please welcome Sean from ASRock who will be here to answer your tech questions related to all ASRock products.

When posting questions, please provide as much info as possible such as full system specs, what operating system and drivers you are using and please describe your problem as full as possible.

This is also an area you can discuss upcoming ASRock products and we will also conduct giveaways and competitions in here from time to time as well. ASRock may also share early BIOS updates and drivers with you here as well.

:thumbsup:


Hi there,

I have an ASRock ConRoe1333-1394 motherboard and recently bought an Ati HD 5670 PCIE video card to replace my old card. As I turn on my pc I get 8-9 beeps and nothing, pc won't start. I can't even enter in the bios. I tried to update my bios to 1.40 but still nothing, now I've downgraded to 1.2 uninstalled my old video driver but still nothing, no video signal at all. Please be kind and help me out here, beacause I'm lost, and I don't want to change motherboard.
I did some print screen too, hope will help.

3622

Thanks in advance. nagyodon

crezzlin
06-20-2011, 10:46 PM
Hi,
2 Questions any help would be grateful :)

I have a Asrock z68 Extreme 4 can you tell me why i would get a error or stop code (92) on the main ASROCK boot up screen, sometimes i can get past this and enter bios then click don't save setting and then it will just boot windows as normal but most the time i need to restart the pc about 8 times to get past the 92 code..

Second question, if you could tell me if running 3 AMD cards (6970's) trifire at 8x8x4 PCIE will the 3rd PCIE slot at 4X lag behind as i can run all my games fine on 2 cards but soon as i use the 3rd card i get a small amount of mouse to screen lag! no problem if this is the case it was a gamble on my part. Thanks!

sfhdweb3
06-23-2011, 02:51 PM
Thanks for joining.

I have had so much help in tweak town and welcome the new addition of the As-rock Forum.

Dave Nomis
06-25-2011, 10:43 AM
Question: I have a new ASRock Extreme4 MB that I have in a new build and already Started it up with Windows-7 OEM Software. Is it OK to update the Flash BIOS or will it cause my OEM Software to think I have changed out my Motherboard and dump my Activation License with Microsoft? If this is not the place to ask this question (First one for me) Where do I do it? Thanks.

Dark_Blue
06-26-2011, 11:47 AM
hi.
some one pls help me.
Can Asrock G41M-VS3 motherboard support pentium 4 3.8GHz and Winova 2GB DDR3 1333MHz Ram ???
thanks :)

alan1476
06-26-2011, 07:19 PM
hi.
some one pls help me.
Can Asrock G41M-VS3 motherboard support pentium 4 3.8GHz and Winova 2GB DDR3 1333MHz Ram ???
thanks :)

■Supports FSB1333/1066/800/533 MHz CPUs
■Supports Dual Channel DDR3 1333(OC)
■Intel® Graphics Media Accelerator X4500, Pixel Shader 4.0, DirectX 10, Max. shared memory 1759MB
■EuP Ready
■Supports ASRock Instant Boot, Instant Flash, OC DNA, ASRock OC Tuner (Up to 158% CPU frequency increase)
■Supports Intelligent Energy Saver (Up to 20% CPU Power Saving)
■Free Bundle : CyberLink DVD Suite - OEM and Trial; Creative Sound Blaster X-Fi MB - Trial

walasthick
06-28-2011, 11:35 AM
Hello everyone. I'm new to this forum and I had to join because of a problem I'm experiencing in my new Asrock n68-s ucc Motherboard. I installed an add on vga (XFX 8600gt) on this motherboard and there is No display on the screen. I tried setting up the primary display on the bios to PCIE, PCI, or Onboard, still no results. THe onboard vga works though. I dont know how to make this work! I tried my friend's gt240 on this board, and it workd ok! My 8600gt works well on other computer, so Im pretty sure that its not the problem. . I hope I posted on the right forum.. Need help ASAP... THanks

alinazas
06-28-2011, 11:45 AM
Hi Everyone
I'm new to This forum
it is great to join this Forum, hope i'm welcome in ;) http://freeimagestocks.com/content/69/grey.png

morad114
06-28-2011, 02:30 PM
Hi There,
I´ve been getting arror code 0538 on and off since I got this mother board,... I remember reading about fixes and trying a couple but nothing last..Please help.. This time my PC stuck and nothing works...Thank you.

morad114
06-28-2011, 02:34 PM
Sorry Forgot to mention my motherboard model, it´s : 775twins-hdtv


Hi There,
I´ve been getting arror code 0538 on and off since I got this mother board,... I remember reading about fixes and trying a couple but nothing last..Please help.. This time my PC stuck and nothing works...Thank you.

brlarg
06-29-2011, 02:02 AM
Hi,
i'm new on this forum and i'd need to know if it's possible (and how) you can plug in an Asrock 3D vision 137D on a tv which is not an HDMI tv? Right now it is plud from a VGA to an S-video. Thank you very much for your answers. (and sorry if i didn't write this message at the right place :/)

tonelloz
06-30-2011, 01:32 AM
Hello!
I am having this problem with my computer that I just built(first build). My computer loaded windows just fine and I was able to load all of my drivers. Then after 30 minutes it crashed and went into a boot loop where it wasnt able to get past the motherboard screen. The next day I was able to get the computer to boot correctly and was able to play battlefield bad company 2 for about an hour before my computer crashed again, It has since then only been boot looping. Help please!
Specs: cpu: i2600k intel quad core mobo: asrock z68 extreme 4 gpu: xfx radeon hd 9870 ram: 4 x 4gb corsair vengeance( the black kind) hd: 2tb wd 7200 rpm asus dvd read/write

tulipo
06-30-2011, 11:39 PM
Hi, i'm new of this forum and i really need your help. Today i flashed my bios to ver 1.30. After that at startup Windows freeze and restart automatically. I tried to re-flash bios to ver 1.10 and to 1.00. But nothing change. I try to reset CMOS too but nothing to do.

That's my config:

ASROCK H67M-ITX/HT
I7-2600k
Kingston Ram Hyperx ddr3 1333 2x4gb
ATI Raden HD6870 Toxic
Western digital RAID1 1tb green power
Case Silverstone Sugo SG-06-450
OS Windows 7 Ultimate 64

Hope someone can help me.

Bye :ponder:

maxchaos
07-07-2011, 03:48 PM
hello! I'm new in this forum and I'm going to open a new thread for my asrock.Goodbyehttp://cdn.tweaktown.com/images/smilies/wavey.gif

Germanytrucker
07-08-2011, 04:12 AM
Hello Mr. Tweak

Is there a BIOS-Update for the Asrock AM2NF6G-vsta motherboard, which supportes the AMD Athlon 64 X2 7850 Black Edition CPU?

I read somewhere, that it's possible to use AM2+ CPU's on a AM2 Motherboard but I'm really not sure that there are any drivers for this CPU. Please help me.

Best regards

Henrik

reddfarr
07-08-2011, 07:15 AM
Hello I have a K10N780SLIX3-WiFi and using oc tuner software I get an error message when trying to adjust settings. "cannot modify processor power control. Windows 7 x64.

blu3jp
07-09-2011, 09:03 PM
Hi

I have a problem on may mother board Asrock N68-S UCC i search on the internet as well at the asrock support page FAQ and i found ideas, main ERROR is (MAC ADDRESS is not VALID BOTH CMOS and FLASH).
base on my research it need to write the mac address to solve this problem. i have my bootable drive to
re-write it but i don't know where to find the mac address on the mother board.

i hope you help my problem thanks!

pacman2912
07-15-2011, 03:36 PM
My motherboard p67 extream6 does not see the video card (gtx460 or gt9500) in the the first and second slots PCIE, but the motherboard sees the card in the third slot. extremely important to me that card was located in the first PCIE slot for better cooling system. Please help me with this problem!

Michael569
07-17-2011, 12:54 AM
I have an ASRock M3A785GXH/128m motherboard, Windows 7 64-bit OS and I'm running a 3.20 gigahertz AMD Phenom II X4 955 CPU with 12GB of DDR3 memory. I just purchased 2-WDC WD3200AAKX-001CA 320GB SATA III hard drives to configure RAID 0 on and I do not get that option after downloading the Windows 7, 64-bit RAID drivers from the ASRock support site. The only option that I get is JBOD and RAID Ready. Can anyone assist me with this? Thanks!

mario.kristiansson
07-18-2011, 10:40 PM
Hi, I have a problem with small blue markings that appear on my screen.

These small blue markings appear in 32-bit colour depth, but aren't present in 16-bit colour depth.
They occur more often on darker parts of the screen/images/etc; haven't seen them on white surfaces.
Appear first on windows login screen, not before.

Occuring more on the upper left / left side of the screen.

Tried both my monitor (HDMI) and TV (DVI); no difference.

Upgraded to the latest gfx card drivers (NVIDIA® GeForce GT425M Graphics driver, v.275.33), using the following guide:
http://forums.tweaktown.com/asrock/43272-asrock-vision-3d-video-drivers.html

The problem was there before, and still is.

I have installed all the latest Windows updates.


System:
ASRock Vision 3D, 156B
Windows 7 Ultimate x64


I have searched the internet for clues as what this could be, but have come up empty. The closest answer I have found, where a guy has similar symptoms, is:
"This is a classic sign of faulty or failing memory modules on the video card. They are either defective or overheating but it's definately a problem with the video memory."

From post:
Red dots appearing on screen - [H]ard|Forum (http://hardforum.com/showthread.php?t=1126984)


See picture below (not screenshots, because the issue can't be captured via a screenshot):
3697

I have a few more pictures, but they are basically the same.


Any suggestions? Help would be greatly appreciated.


Cheers,
Mario

ford
07-24-2011, 09:11 AM
I have a Asrock motherboard and the information is:
product key:k7s41g x
Manufacture:
(Bios) version p200
vender: american Magatrends Inc
Released date:10/28/2004
Rom size 256 kbytes
(CPU) Processor: AMD Sepron (TM) 2200+
socket: socket A
external clock: 166MHZ i have 1.51 ghzs 1.43 GB of Ram
Whenever i install windows 7 the internet does not work, Ethernet Adapter is missing, using service pack 3 it works; how do i get the right Ethernet Adapter for windows 7? Tell me how to correct the problem, please

jdmfish
07-25-2011, 11:24 PM
Hi Sean, or anyone who can address this question...

Can the current series H67-M-GE/HT (B3) support Intel Xeon E3 1155 processors? Specifically the Xeon E3-1235?


It's the same as an i7 2600, except it has Intel HD3000 (instead of 2000 on i7/2600), clocked .2ghz slower, and is $50 cheaper.





Thanks! :beer:

j2satx
07-29-2011, 02:57 AM
Where is BIOS setting to enable AHCI for SSD on N68C-S UCC motherboard?

Jikenda
07-29-2011, 11:52 PM
I am doing a clean install on this board of Windows 7 64x, but it takes around 4 hours for all the files to load before I even get to the installation window asking about language, etc.. What settings need to be enabled/disabled in the BIOS? I've been experiencing extremely laggy BIOS screens, and with my old installation of Windows 7, the boot process would take about 20mins just to get to the Windows desktop. Something must be setup incorrectly. Any advice? Thanks for your help.

Alienware Area-51 case
ASrock Z68 Extreme4 (replaced the original Alienware Gigabyte mobo -damaged)
i5 2500k (replaced original Core 2 Quad)
G. Skill RipjawsX 4GB X 2
Storage Samsung Spinpoint 1000GB (1.TB) /32MB cache hard drive
Alienware 1100Watt Multi-GPU Approved
ATI Radeon HD 5870
Optical Lite-On 24X Dual-Layer Burner (DVD±RW)
Win7 home premium 64-bit

python
07-30-2011, 09:52 PM
Hi, I have a problem with small blue markings that appear on my screen.

These small blue markings appear in 32-bit colour depth, but aren't present in 16-bit colour depth.
They occur more often on darker parts of the screen/images/etc; haven't seen them on white surfaces.
Appear first on windows login screen, not before.

Occuring more on the upper left / left side of the screen.

Tried both my monitor (HDMI) and TV (DVI); no difference.

Upgraded to the latest gfx card drivers (NVIDIA® GeForce GT425M Graphics driver, v.275.33), using the following guide:
http://forums.tweaktown.com/asrock/43272-asrock-vision-3d-video-drivers.html

The problem was there before, and still is.

I have installed all the latest Windows updates.


System:
ASRock Vision 3D, 156B
Windows 7 Ultimate x64


I have searched the internet for clues as what this could be, but have come up empty. The closest answer I have found, where a guy has similar symptoms, is:
"This is a classic sign of faulty or failing memory modules on the video card. They are either defective or overheating but it's definately a problem with the video memory."

From post:
Red dots appearing on screen - [H]ard|Forum (http://hardforum.com/showthread.php?t=1126984)


See picture below (not screenshots, because the issue can't be captured via a screenshot):
3697

I have a few more pictures, but they are basically the same.


Any suggestions? Help would be greatly appreciated.


Cheers,
Mario
i would put in a known good graphics card if u or a friend has one...that looks like either a bad driver or bad card

python
07-30-2011, 09:55 PM
Hi Sean, or anyone who can address this question...

Can the current series H67-M-GE/HT (B3) support Intel Xeon E3 1155 processors? Specifically the Xeon E3-1235?


It's the same as an i7 2600, except it has Intel HD3000 (instead of 2000 on i7/2600), clocked .2ghz slower, and is $50 cheaper.





Thanks! :beer:
im sure that he is really busy..this took me all of 3 seconds to find this for u..please use google or do some footwork for urself before u make posts..thanks
ASRock > Products > H67M-GE/HT > CPU Support List (http://www.asrock.com/mb/cpu.asp?Model=H67M-GE/HT)

ken07734
08-07-2011, 09:21 AM
My PC crashed as stated above when ever I use google earth in random times. I have performed ALL the recommended procedures from google and also removed ALL ATI drivers and re-installed clean, no good. My question is: Is this video board actaully compatable with this Mobo? I even have a 400 watt PSU to make sure I covered the power needs. Is there any updates not listed on the bios download page for this?


Thanks.

Brusska
08-08-2011, 07:41 PM
Hello, I have got asrock 4 core dual vsta and does not work PWM fan. In the bios is cpu fan quiet enabled.
What is the latest version of bios?2.30? and beta ?I have got zalman cnps10x performa.

werts
08-11-2011, 11:04 AM
Hello, I have z68 pro 3, and installed and reinstalled app charger but why is it that my sisters Ipod touch 4g wont charge through usb while computer is shutdown. I have read that it charges iphone/ipad/ipod while power is turned off. I thought while the system unit is plugged and the power supply is on it will charge. Also, does the app charger includes ipod touch?

oscotron
08-12-2011, 03:06 PM
Hey guys!
I've got a bit of a problem here, Im not sure is this the right forum to ask but I have this problem: MY PC wont shut down automatically.
When I shut down my win7 it exits comlpleatly, hardrive stops but the mobo wont. all the fans are still runing and the power light is still on. I can only turn it off holding the power button for a few sec. then it shuts down.
my sys:
MOBO: ASRock 4CoreDual-SATA2
CPU: DualCore Intel Pentium D 915, 2800 MHz (14 x 200)
VGA: ATI Radeon HD 4550 (128 MB)
sys mem: 2048 MB (DDR2-667 DDR2 SDRAM)
HDD: WDC WD2500AVJS-63B6A0 ATA Device (232 GB, IDE)

Please help me out here! Im compleatly noob :)

Tony Lingus
08-12-2011, 10:30 PM
Hi! Please answer.
AsRock ConroeXfire E-SATA II supports nVidia GTX 560???

kick
08-12-2011, 10:51 PM
This is a wellcome to the forum thread , not even started by asrock tech help people.
Its the same as in the other manufacturer forums.

ie if you have a problem/q ,you are much more likely to get a response in the main forum with an individual post.

nb ,I dont think "Sean" is the semi resident asrock tech helper anymore ,its "Emily" now.

minimal
08-21-2011, 01:27 PM
The ASRock Technical Support forum is now open and ready for posts!

Please welcome Sean from ASRock who will be here to answer your tech questions related to all ASRock products.

When posting questions, please provide as much info as possible such as full system specs, what operating system and drivers you are using and please describe your problem as full as possible.

This is also an area you can discuss upcoming ASRock products and we will also conduct giveaways and competitions in here from time to time as well. ASRock may also share early BIOS updates and drivers with you here as well.

:thumbsup:

Welcome indeed, but why are these tech support folks ignoring my threads!!!

alan1476
09-08-2011, 01:08 AM
They have never answered mine, why are you special?

minimal
09-08-2011, 11:48 AM
alan1476 hi.

I did get a response actually, from ASRock TSD Emily (http://forums.tweaktown.com/asrock/45662-xfastusb-wont-open.html#post403141) regarding my post about XFast USB utility, which is a waste of time - it actually slows down USB devices.

All of my direct support requests to Asrock have NOT been answered as well.

Lets just hope the motherboard - Z68 Extreme4, is as great as the hype it's had......

alan1476
09-08-2011, 10:39 PM
alan1476 hi.

I did get a response actually, from ASRock TSD Emily (http://forums.tweaktown.com/asrock/45662-xfastusb-wont-open.html#post403141) regarding my post about XFast USB utility, which is a waste of time - it actually slows down USB devices.

All of my direct support requests to Asrock have NOT been answered as well.

Lets just hope the motherboard - Z68 Extreme4, is as great as the hype it's had...... It is a good board, that was not my gripe, my gripe was with an RMA directly with Asrock which we are not allowed to discuss on these forums. They also came out with a better Z-68 board with better graphic card support right after I bought mine. Its a racket.

zoters
09-14-2011, 11:19 PM
i need help w/ my asrock z68 extreme4 gen3,,

its just started wen i shut down my computer last night,,after shuting after a second it will directly turn on again w/out pressing any button...sometimes code error display is 59,,,sumtyms it will not boot up
i'm having deficulty to find a solution and to troubleshoot the problem of my mobo...

i need help...

rdeater
09-22-2011, 02:40 AM
I have a 775i65g - is it possible to install a xeon 3050 cpu??

Beachbum76
09-22-2011, 06:55 AM
ASROCK IES stopped working and now gives a message at attempted start-up. ANY IDEAS. I reinstalled IES twice, problem repeats.

"Driver cannot be loaded reinstall the program may fix the issue. If it happens again report the problem with your system configuration detail as much as possible."

K10N78M Pro. Win7 64, AMD Phenom X4, 4GB Corsair. Everything else works.

xcstevep
09-22-2011, 08:49 AM
Hi friends,

I recently purchased an Asrock 890GX Pro3 mobo because my older one was cracked in shipping (lesson learned...never ship something fragile via USPS, regardless of insurance). I connected everything, then tried to start it, but I got no post. Instead, I got error code 54, which, according to my manual, means "unspecified memory initialization error".

This sounds pretty ambiguous, and I'm really bummed because I've been working on my build for the past 4 weeks trying to get it working again. I imagine there has to be some issue with the memory, and I saw in some forum that my board doesn't support ECC memory, but I don't think mine is ECC. I have 2 sticks of 2GB Patriot memory at 1600MHz...here's the model: Patriot PDC34G1600LLK

The system:
AMD Phenom II X4 955 BE
WD 500GB HDD
Windows 7 Home Premium 32-bit
Asrock 890GX Pro3
2x2GB Patriot DDR3 1600 memory
ATI 4890 (not in use as i troubleshoot)


If anyone knows what's up, I'll be deeply grateful. I'll buy another few gigs of RAM if I have to, but I've put so much money into this thing that it just kills me to have it sitting uselessly around.

Thanks,
xcsteve

Anthony88
09-29-2011, 10:34 AM
Welcome ASRock Sean, Don't know ne-thing about your products, but who knows may try one of your X58 boards... http://cdn.tweaktown.com/images/smilies/beerchug.gif
http://www.makemoneymakemoney.net/1.jpg
http://www.makemoneymakemoney.net/2.jpg
http://www.makemoneymakemoney.net/4.jpg

jason23
10-12-2011, 07:05 AM
hey am i was just wondering!! i have a Asrock N68-VS3-UCC motherboard.. and i saw it has a bios update.. 1.20!! so i was wondering if this bios update will enable my motherboard 2 run the new bulldozer processors that is comming out! this year! b4 i update my motherboard need 2no ...thanks for reply!

d1am0nd
10-15-2011, 06:39 AM
Well, I have some boot issues with this motherboard. When the CPU is overclocked over the 49x multiplier it doesn't want to boot within any voltages of Vcore and the code in Dr Debug is 70, which i can't understand what it means (in the user's manual the description of the code has nothing to do with the problem), and i it doesn't fix with restart - i have to clear the CMOS. So what connect code 70 with overclocking of CPU ? Why does it have this influence to the multiplier, and i can't boot over 49-th multiplier ?

legacyrs
10-18-2011, 01:31 PM
Hi i am having a problem with trying to install the sata drivers. I just bought a 990 fx extreme4 and it comes up with signed 64 and 32 bit unsigned driver not supported and i cant continue with the install. Bios is 1.20. Any help???

limberjack
10-25-2011, 06:11 PM
Close this Asrock Technical support forum, please. There's never any answers, so why have it?

blackhawkxlh
10-29-2011, 11:59 AM
My Rig : Asrock Extreme4 Z68 , Bios Ver. 1.7, Western Digital Hard Drive 1 TB, 16gb Corsair Vengence 9 9 9 24 1T, Windows 7 64 bit , two EVGA GTX470 video cards in SLI, 750 watt Pwr Sup. , Thermatake Bigwater 760 plus water cooling system for the GPUS , Corsair H100 water cooler for the CPU, one Patriot 64gb SSD Drive in raid 0 for SRT .

clsource
11-23-2011, 07:52 AM
Exists a bios Fix for a Cold Boot from a ASRock p67 Extreme 4 ?

Bredband
11-23-2011, 10:18 PM
Hi!

What is new in released beta BIOS (L1.53). to ASRock 890GM PRO3 R2 mATX?

member4
11-24-2011, 05:18 PM
Hello All members,


Like to know if this Motherboard ASRock > Products > ALiveXFire-eSATA2 (http://asrock.com/mb/overview.asp?Model=ALiveXFire-eSATA2) supports AMD Phenom II X6 1055T (http://www.alza.sk/amd-phenom-ii-x6-1055t-d167547.htm) .. ?

baitmn
11-29-2011, 08:55 AM
Sean,
Welcome aboard the tweaktown express forums:boldblue:

le_hobo
01-05-2012, 10:52 AM
Hello all,

I picked up a Asrock 890FX Deluxe4 and I'm wondering if there is a way I can determine the BIOS version by physically looking at the board. I have a FX-4100 and I'm concerned that it may be preventing my PC from booting, as I see that the latest version of the BIOS supports the FX line of processors. Any help you guys can give would be great.

Thanks!

Randomusername
01-16-2012, 03:19 PM
I have an ASRock P67 Pro3 mobo and I'm having trouble wiring my system panel header with my corsair 500R case. Has anyone else had any trouble with this or could someone point me towards where I could figure out this problem?

Ram85
01-20-2012, 04:30 AM
I have a Asrock x79 extreme 9 and I'm struggleing to get the Game Blaster to work. I currently have it at pci-e slot 1 and I see the manual says it must be at pci-e slot 3. Is there a specific reason for that? At the moment the Lan port works fire however windows 7 does not detect a sound card whatsoever.

Would really appreciate some help as all my other slots are currently used and would like to get the sound working.

Jon Parker
01-27-2012, 12:35 AM
Hi, I have an awesome Asrock fatality P67 professional motherboard, unfortunately I accidentally broke a pin in the cpu socket. Im wondering if there is anyway this could be fixed so I don't have to buy a new motherboard. Thanks

Ram85
02-03-2012, 12:01 PM
Game Blaster is working fine now. I had to use the x1 slot and shouldnt have used any other pci-e slot.

New problem though is that my bios and AXT utility shows my Vcore as 0.000v, my +5.0 voltage as 0.000V, my +3.3 voltage as 0.000V, my +12 voltage as 0.000V and SB temp as -128C no matter what setting I use in the bios. I've reset everything and even reflashed the bios.

Can anything please help? The board works 100% its just that those reading are not working. Should I RMA?

Asrock Extreme9
3930K
16gb Corsair Vengence 1600mhz

sharpnailz
02-06-2012, 10:53 PM
is there a 64bit beta bios for A790GX/128M running win7? because i cant unlock the 2 cores of my phenom II x4 960T...tnx!!!

wizzard-100
02-08-2012, 01:05 PM
Unless you are getting a pm, I haven't noticed a single answer to any question so far. Sean if you are still with Asrock you are kind of useless don't you think.

obli
02-08-2012, 04:53 PM
Sean's last post was last year in February.
Is anyone esle going to handle this?

Certain % of people are experiencing the following problem with ALL Asrock z68 series:
http://forums.tweaktown.com/asrock/47468-asrock-z68-extreme3-gen3-some-very-weird-problems.html

anonimo1966
02-13-2012, 04:53 PM
Buenas alguien me podria decir como poner mi placa ASRock 775Dual-880Pro (4 PCI, 1 PCI-E x16, 1 AGP, 2 DDR DIMM, 2 DDR2 DIMM, Audio, LAN) en dual channel?

AiWL
02-15-2012, 06:41 AM
Hey,

I just recently purchased a Asrock Z68 Extreme3 Gen3 motherboard and I'm trying to move my video cards from my old system to this one, since I don't yet have the funds to purchase the cards I actually want. However the mother board doesn't seem to want to recognize that the cards are plugged in. I have a pair of GeForce 9500 GT.

sharpnailz
02-15-2012, 09:14 PM
maybe he abandoned this thread...

R3ster
02-16-2012, 06:30 AM
Better said, ASRock abandoned their tech support altogether...

inel-it
02-22-2012, 03:56 PM
Help my!

Motherboard: ASRock M3N78D
Problem: MAC address are invalid in both CMOS and FLASH (Press F1 to Resume)R

RESET CMOS and AFUDOS not modify MAC in FLASH.

MAC address: 0025222D6194

Find dump BIOS for ASRock M3N78D or metod for modify MAC address in FLASH for this motherboard.

Thanks.

spacekees54
02-29-2012, 02:36 AM
cosior 8gb, AMD phenom x4 3.5GHz (CPU), 640gb (HDD), ASrock Extreme 3.0 R2.0 (mobo), GTX 550ti (GPU), TP-LINK wireless network adapter 300Mbps, Windows 7 64-bit.

Hello guys,
I've got a problem. My network adapter is failing me, while it works perfectly on other computers. Every time I boot up my pc acts as if the card isn't there. And when I look at device manager it days the driver is no good, while sometimes the internet works fine but only after re-installing the driver and reboting the pc. Then it works once then when I reboot it's the same problem all over again!
I'm starting to get rilly angry at the pc, so before I kill it does anyone have an idea?

Kind Regards

jiggageazy
02-29-2012, 03:47 AM
Sean's last post was last year in February.
Is anyone esle going to handle this?

Certain % of people are experiencing the following problem with ALL Asrock z68 series:
http://forums.tweaktown.com/asrock/47468-asrock-z68-extreme3-gen3-some-very-weird-problems.html


my problem is i have two of these boards and i can't get them to display video out of discreet video cards. Onboard graphics work but neither board will produce a signal while the discreet cards are in. Windows detects them as working but no video signal in windows or bios. I've called and submitted a ticket but ASRock support is shall i say a little lacking!

catchsander
03-03-2012, 04:41 PM
Hello,
I have Z68 Pro3-M motherboard and two monitors with only VGA/D-sub connectors. Does anyone know if the on board card supports D-Sub trough D-Sub to DVI converter? I've searching the forum but could not find any info and it is not working for me.
Thanks.

iameka
03-19-2012, 07:57 AM
Dear Asrock,


I am a customer of Asrock Motherboard H61M / U3S3. I use Windows XP SP3. I have installed all of the drivers in motherboard bonus CD, such Onboard VGA, INF Driver, Management Engine driver, Onboard Audio drivers, etc. And in BIOS setup, I have set Enabled the Onboard HD Audio.


But I still can not play any music, since the onboard soundcard in motherboard, can not be detected. Here what I found using Dx-Diag and Device Manager in Windows.


http://img710.imageshack.us/img710/9735/nosc.png


http://img11.imageshack.us/img11/5312/audio1n.png


http://img269.imageshack.us/img269/1168/audio2m.png


Here the conclusion is no soundcard detected in my system, hence the audio devices also doesn't exist too.


My question is, how to enable AsRock onboard soundcard in my computer system?


I have read the FAQs in ASRock > Support > FAQ (http://www.asrock.com/support/faq.asp?c=Audio)


and I still don't get it, about the tutorial here:


If you use AC'97 front audio panel, please install it to the HD audio header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don't need to connect them for AC'97 audio panel.
E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select
Chipset Configuration. Set the Front Panel Control option from [Auto] to [Enabled].


Because the motherboard manual book says, they are not jumper.


Please tell me, if you have any solutions to my problem. And if you do have any picture to explain the solution, please to send the picture too to my email using attachment.


You can mail me at my email: ekadp73@yahoo.com. Thanks you very much.



Best regard,


Eka Dharma,
Indonesia.

sreggy
03-30-2012, 12:04 AM
Dear all,
could anyone help me to undertand if the ASRock SATA3 controller is conpatible with ASUS M3N78-EM motherboard?

If YES, could I boot from a disk attached to the external controller?

Thanks in advance for support,
regards

Stefano

goodjellyroll
03-30-2012, 04:17 AM
Can someone at ASRock gain access to my computer & see what needs to be done so my Microsoft Flight Simulator will run/work more than 10 minutes at which time I get a "Blue Screen of death" as it is called. I have more info re: the Blue Screen but if no one at ASRock can gain access to my computer, there is no use in providing it at this time.

alan1476
04-13-2012, 11:36 PM
Has anyone seen any answers here from Asrock support?

hux19
04-26-2012, 11:27 PM
Hi Guys,

I have an odd problem with my Asrock Penryn1600SLI-110dB motherboard and my 9800GX2.

The board and card run perfectly in windows with the latest bios and drivers, but as soon as i start up a game the screen goes funny and the pc hangs.

I have tried the system with a GTX260 graphics card and it works perfectly in windows and in games.

The games i have tried are grid, dirt and batman.

My spec:
Asrock Penryn1600SLI-110dB Motherboard
Intel 6600 Quad core G0
2x2GB Vdata DDR2 800 Memory
BFG 9800GX2 Graphics card
High Power Plus 650W PSU
Maxtor 250GB Hard drive
Coolermaster cpu watercooling
Windows 7 32Bit

The whole system is running stock

Can anyone help?

Regards

sawinder@gmail.com
05-23-2012, 05:51 AM
I have put together a new configuration with Intel i7-2600K 3.4GHz sandy bridge 1155 processor, Asrock P67 Extreme Gen3 motherboard, EVGA GeForce GTX 560 video card, Mushkin Blackline 8 Gb Ram( 4GB each), samsung 830 series 128Gb ssd and western digital caviar black 1 TB hdd with windows 7 ultimate edition. For a month my pc has been working fine but all of a sudden my pc won't progress further from post and shows code 59 on Dr. Debug. In manual codes explanation is: CPU micro code is not found or micro code update is failed. I have tried resetting cmos by "clrCMOS" button, by jumper and even took the battery on motherboard out but still keep getting this code. I have exhausted my research on this code and have not been able to find any explanations on this one. Since the pc had been working for a month and no new hardware is installed, I don't understand the cause of this error. Please help

alan1476
05-23-2012, 06:00 AM
I have put together a new configuration with Intel i7-2600K 3.4GHz sandy bridge 1155 processor, Asrock P67 Extreme Gen3 motherboard, EVGA GeForce GTX 560 video card, Mushkin Blackline 8 Gb Ram( 4GB each), samsung 830 series 128Gb ssd and western digital caviar black 1 TB hdd with windows 7 ultimate edition. For a month my pc has been working fine but all of a sudden my pc won't progress further from post and shows code 59 on Dr. Debug. In manual codes explanation is: CPU micro code is not found or micro code update is failed. I have tried resetting cmos by "clrCMOS" button, by jumper and even took the battery on motherboard out but still keep getting this code. I have exhausted my research on this code and have not been able to find any explanations on this one. Since the pc had been working for a month and no new hardware is installed, I don't understand the cause of this error. Please help

Shut down your PC.
Disconnect the power cord.
Press and hold the clear CMOS button on the back of the computer for about 10 seconds.
Reconnect power cord and power on the PC.

If the above didnt work try Memtest.

sawinder@gmail.com
05-24-2012, 02:30 AM
I have put together a new configuration with Intel i7-2600K 3.4GHz sandy bridge 1155 processor, Asrock P67 Extreme Gen3 motherboard, EVGA GeForce GTX 560 video card, Mushkin Blackline 8 Gb Ram( 4GB each), samsung 830 series 128Gb ssd and western digital caviar black 1 TB hdd with windows 7 ultimate edition. For a month my pc has been working fine but all of a sudden my pc won't progress further from post and shows code 59 on Dr. Debug. In manual codes explanation is: CPU micro code is not found or micro code update is failed. I have tried resetting cmos by "clrCMOS" button, by jumper and even took the battery on motherboard out but still keep getting this code. I have exhausted my research on this code and have not been able to find any explanations on this one. Since the pc had been working for a month and no new hardware is installed, I don't understand the cause of this error. Please help

I have tried pressing clrCMOS button and rebooted but to no avail, also I have booted system with no RAM in memory module which resulted in getting Dr. Debug code 53 as expected and have tried booting up with all 4 memory slots with all possible configurations and it still gives me code 59.

nagoli
05-24-2012, 08:16 PM
May I ask why is this forum listed on the Asrock website as an official support forum when there is no support provided here what so ever????
I have also opened a ticket to Asrock TSD from the main site but they didn't answer to that as well and this was not the first time.

There are many times when there are no are solutions to the issues one is facing with a product but the fact the Asrock support doesn't even try to help the people here is simply outrageous.
Asrock is many times stated as the cheaper but equally good alternative to the other big brands but now I see it comes with the price of total lack of customer support.

Animull
05-26-2012, 12:34 PM
Have new computer for gaming.

Its my 5th one I have built (Not a rookie).

The MB is an ASROCK Z77 extreme6.

It gets a A2 error on startup.

HAVE not loaded win 7 or anything.

Have removed and reinstalled VC to make sure its seated properly as well as all cables.
Still no luck?
How do I diagnose this problem?
THANKS,
Rob

Thekahboom@yahoo.com

jodix
06-05-2012, 07:12 PM
Hi,

I want to buy an ASRock motherboard, which is the 990FX Extreme3 socket AM3+ - ASRock > Products > 990FX Extreme3 (http://goo.gl/iWs58)
But when I look at the memory support list here ASRock > Products > 990FX Extreme3 (http://goo.gl/p6xif) I found out that Corsair Dominator series is not listed there.
Does this mean that all Dominators will NOT work with Extreme3 board, or does this mean that it MAY work, but nobody in ASRock tests that yet??

Thanks for any comments..

Cheers!

profJim
06-05-2012, 07:30 PM
Motherboard manufacturers can't test every brand and model of memory for any motherboard model.
Your best bet is to contact Corsair tech support and/or check the Corsair memory forum for a setup that includes the memory and motherboard that you want to buy. With luck, there will be one or more forum members that can report if they have identical hardware.
It's possible that ASRock tech support can test the same memory and motherboard and report back to you.

Which specific Corsair Dominator modules to you want to buy? How many memory modules? Total memory amount?
Which cpu do you plan on buying?

jodix
06-05-2012, 08:38 PM
Motherboard manufacturers can't test every brand and model of memory for any motherboard model.
Your best bet is to contact Corsair tech support and/or check the Corsair memory forum for a setup that includes the memory and motherboard that you want to buy. With luck, there will be one or more forum members that can report if they have identical hardware.
It's possible that ASRock tech support can test the same memory and motherboard and report back to you.

Which specific Corsair Dominator modules to you want to buy? How many memory modules? Total memory amount?
Which cpu do you plan on buying?

The Corsair modules I want to buy is CMP8GX3M2A1600C9 - Dominator® with DHX Pro Connector (http://goo.gl/mlxGe)
It contains 2 x 4GB modules, so the total is 8GB.
About the processor, I'm considering either AMD Bulldozer FX-4100 or Phenom II X4 955.

I just find from Learn & Explore (http://goo.gl/oGYy1) that CMP8GX3M2A1600C9 did not come up as one of the results, but CMP8GX3M2A1600C8 came up. But if CMP8GX3M2A1600C8 works, CMP8GX3M2A1600C9 should work as well, right?

profJim
06-05-2012, 08:54 PM
@jodix
Without checking the specs for each kit you listed, the C8 kit is probably Cas 8, while the first kit is Cas 9.
Don't assume that all Dominator models are necessarily compatible.

You will save yourself a lot of possible grief if Corsair tech support can verify that the kit you want is fully compatible with your motherboard choice with either of the cpu's you will buy. Another alternative is to find a motherboard or memory review from a reputable website that tested with the exact same memory and motherboard.

Otherwise you takes your chances.
Maybe you win, maybe you lose.

Many memory modules have very tall heat-spreaders, make sure that you don't end up memory that is too tall for your cpu heatsink.

jodix
06-08-2012, 11:32 AM
@jodix
Without checking the specs for each kit you listed, the C8 kit is probably Cas 8, while the first kit is Cas 9.
Don't assume that all Dominator models are necessarily compatible.

You will save yourself a lot of possible grief if Corsair tech support can verify that the kit you want is fully compatible with your motherboard choice with either of the cpu's you will buy. Another alternative is to find a motherboard or memory review from a reputable website that tested with the exact same memory and motherboard.

Otherwise you takes your chances.
Maybe you win, maybe you lose.

Many memory modules have very tall heat-spreaders, make sure that you don't end up memory that is too tall for your cpu heatsink.

hmm.. the problem is that i can't find any store nearby who sell C8 yet. i guess i'll have to take my chances this time.
thank you all!

profJim
06-08-2012, 12:06 PM
hmm.. the problem is that i can't find any store nearby who sell C8 yet. i guess i'll have to take my chances this time.
thank you all!Good luck, let us know how you make out with your new memory.

parsec
06-09-2012, 11:25 AM
Just bought my first ASRock board, and so far it has worked great. I then checked on the ASRock forums for their products, and found they don't have one of their own. There are three external sites that provide a forum for ASRock, including this one, thanks to TweakTown for that BTW.

Regardless, this is disappointing, mainly because of the lack of involvement by ASRock itself. It's also reflects negatively upon ASRock, it makes them look like a small company that can't afford their own site. I will say the FAQ info on ASRock's site is better than most mother board manufactures, but it did not happen to address my questions.

I can't think of any major PC product manufacture that does not have their own web site, I am not impressed. As has been pointed out in this thread, the support person from ASR hasn't posted here in a long time. Sad for us and ASRock.

Jannsen
06-19-2012, 03:32 PM
Hello

I just bought an Asrock Z77 Extreme4 Motherboard, all is great about this motherboard except for the fact that the USB 3.0 is not working well in my end.

I've installed all the required drivers in which downloaded from the Asrock site (chipset, LAN, USB 3.0, etc) installation went smoothly and no problem occurred.

The next day, the problem started to come out. USB 3.0 port cannot detect my mouse. I have to plug it to another USB port to use my mouse. This happens everyday, once I boot my system, my mouse isn't recognized and I have to move it to another USB port. I've flashed my BIOS to the latest, and to no avail, same thing happens. I've done reinstalling chipset drivers and USB 3.0 drivers and still it's the same

any solution or workaround for this?

ginger will
06-20-2012, 03:39 AM
The ASRock Technical Support forum is now open and ready for posts!

Please welcome Sean from ASRock who will be here to answer your tech questions related to all ASRock products.

When posting questions, please provide as much info as possible such as full system specs, what operating system and drivers you are using and please describe your problem as full as possible.

This is also an area you can discuss upcoming ASRock products and we will also conduct giveaways and competitions in here from time to time as well. ASRock may also share early BIOS updates and drivers with you here as well.

:thumbsup:
hey there hope you could answer my little problem im trying to get win 7 on my AM2NF3-VSTA ive updated the bios and had a great install no problems but cant get it to recognise my radeon hd 3850 drivers am i missing a motherboard driver for this or am i just gonna have to accept my agp system is old and stick with xp . beer can make evrything better in the end id needs be lol

janoleholm
07-01-2012, 03:27 AM
Hello ForumI am Jan Holm from Denmark. I have a AsRock ION 330 N, where I have problems with LAN.Is this the right forum? I don't find anything when searching with keywords like "ION/330/ion AND 330"Jan

itzik
07-10-2012, 02:48 PM
hi Sean,

i am a new member.
i need your help regarding the ION 330PRO....
Can i connect a remote control to a Asrock 330 Pro?
does its motherboared have CIR header?
what is the model of its motherboared?

thank you for your help.
itzik







The ASRock Technical Support forum is now open and ready for posts!

Please welcome Sean from ASRock who will be here to answer your tech questions related to all ASRock products.

When posting questions, please provide as much info as possible such as full system specs, what operating system and drivers you are using and please describe your problem as full as possible.

This is also an area you can discuss upcoming ASRock products and we will also conduct giveaways and competitions in here from time to time as well. ASRock may also share early BIOS updates and drivers with you here as well.

:thumbsup:

LiBronks
07-14-2012, 07:38 AM
Hello, I have a motherboard N68C-GS FX, please tell me what video card do I need and I can not find the list of compatible video cards?!

mikeyg
07-15-2012, 08:01 AM
QUOTE=Lsdmeasap;354735]Welcome to TweakTown Sean![/QUOTE]

Hi Sean
I am looking to build a system on the ASRock A75M-HVS FM1 MB
Planned CPU = AMD A4-3400 Llano 2.7GHz Socket FM1 65W Dual-Core Desktop APU (CPU + GPU) with DirectX 11 Graphic AMD Radeon HD 6410D AD3400OJHXBOX

<tbody>
Planned RAM = Crucial Spectek 4GB DDR3 1333MHz (PC3-10600) 240-Pin Desktop Memory ST51264BA1339


Can you confirm compatibility with your MB?
Thanks in advance for your help!

</tbody><colgroup><col></colgroup>

kpandur
07-18-2012, 09:35 PM
Hi there Sean!
I have a relatively new H61m-VS motherboard with an Intel G620 processor. It worked great for a while but recently I have had some problems with it.
It tries to boot up without me even pressing the power button. And it almost always fails after two seconds. And then, after about five seconds it tries again, with the same result. Usually it doesn't even get to the BIOS boot screen.
I tried solving it by taking out the battery of the motherboard and then clearing the CMOS settings but nothing worked. The last time this happened it kind of solved itself. It somehow was able to boot my Windows 7 Ultimate, but it immediately shut down, properly that time. And then it worked for a week.
Both the CPU and then power fan work properly, so I have no idea what I should check or do. Please help me.

parsec
07-19-2012, 02:13 PM
To All Those Writing to Sean,

Sean has not posted in this thread or forum for a very long time. What happened to him? We have no idea. Don't bother waiting for a reply from him or anyone else from ASRock in this thread, that will not happen, sorry to say.

Your best option is posting a new post/thread about your issue in the forum itself, and you might get some help from another forum member. ASRock is NOT reading or responding to anything in this forum. Good Luck!

profJim
07-19-2012, 04:10 PM
ASRock is NOT reading or responding to anything in this forum. Good Luck! WRONG!!
ASRock TSD - Emily responds to posts from time to time and helps troubleshoot issues.

A very common problem is that the poster does not take the time to create a detailed hardware list with brand names and model numbers.
We are not mind readers.
Providing detailed information about your system will save time and possible errors.
It is a waste of everyone's time when you only list your information in the first post.
Many of us are helping in many threads at the same time and don't have time or patience to go searching back through the thread to try to find the hardware details.

You should create a new thread with a meaningful title that briefly describes the problem and includes the motherboard (or other hardware) model name.


We can best help you after you create a detailed hardware list in the PC Specs portion of your
forum profile http://forums.tweaktown.com/profile.php?do=editprofile at the bottom of the
profile page or in your forum signature http://forums.tweaktown.com/profile.php?do=editsignature.
Be sure to include brand names and model numbers.

LiBronks
07-19-2012, 09:17 PM
WRONG!!
ASRock TSD - Emily responds to posts from time to time and helps troubleshoot issues.

A very common problem is that the poster does not take the time to create a detailed hardware list with brand names and model numbers.
We are not mind readers.
Providing detailed information about your system will save time and possible errors.
It is a waste of everyone's time when you only list your information in the first post.
Many of us are helping in many threads at the same time and don't have time or patience to go searching back through the thread to try to find the hardware details.

You should create a new thread with a meaningful title that briefly describes the problem and includes the motherboard (or other hardware) model name.


We can best help you after you create a detailed hardware list in the PC Specs portion of your
forum profile http://forums.tweaktown.com/profile.php?do=editprofile at the bottom of the
profile page or in your forum signature http://forums.tweaktown.com/profile.php?do=editsignature.
Be sure to include brand names and model numbers.





Я кажется ясно изложил суть своей проблемы,но так и не получил на него ответа,что вы за служба поддержки,что вы не можете ответить на столь легкий вопрос????
"Здравствуйте, у меня есть материнская плата ASRock N68C-GS FX, пожалуйста, скажите мне,какая видеокарта мне подойдет, и я не могу найти в списке совместимых видеокарт?"..................

LiBronks
07-19-2012, 09:37 PM
Hi there Sean!
I have a relatively new H61m-VS motherboard with an Intel G620 processor. It worked great for a while but recently I have had some problems with it.
It tries to boot up without me even pressing the power button. And it almost always fails after two seconds. And then, after about five seconds it tries again, with the same result. Usually it doesn't even get to the BIOS boot screen.
I tried solving it by taking out the battery of the motherboard and then clearing the CMOS settings but nothing worked. The last time this happened it kind of solved itself. It somehow was able to boot my Windows 7 Ultimate, but it immediately shut down, properly that time. And then it worked for a week.
Both the CPU and then power fan work properly, so I have no idea what I should check or do. Please help me.


Проверь работают ли все куллеры на данном компьюторе,проверь Thermal grease,проверь достаточно ли мощности у блока питания

kpandur
07-20-2012, 12:23 AM
Проверь работают ли все куллеры на данном компьюторе,проверь Thermal grease,проверь достаточно ли мощности у блока питания

Thank God for Google Translate. Also thanks for the advice, but I got some help and it turned out the problem is the power switch. It must have been short circuited somehow while moving the computer. I unplugged it from the motherboard and now it works perfectly.

LiBronks
07-20-2012, 01:25 AM
Thank God for Google Translate. Also thanks for the advice, but I got some help and it turned out the problem is the power switch. It must have been short circuited somehow while moving the computer. I unplugged it from the motherboard and now it works perfectly.




But not for that, I have a cable network or when not moving away, I found the system unit so that it can be moved without any consequences, I have to turn the cable and do not depart))))))))) Secure the cable to the body of the system unit and in the future he will not depart))))))

renat77
07-20-2012, 05:19 AM
I'm using 3-way GTX 670 SLI.
Motherboard "Fatal1ty Champion X79". I7-3930K

"X79 PCIE 3.0 for the nvidia fix" when active, although the system does not open. Sometimes the system is opened late. Sometimes it will not load. Find only two cards in the system is opened, does not reach the third card. . Yes, after canceling SLI, running the application. I would check the registry settings with regedit. link in the three values ​​are assigned. In the motherboard, 1.4 and 7 slot, the card is inserted.

Asrock motherboard problem or is relevant to the nvidia driver? Perhaps you updated the motherboard bios, I do not know.

I need urgent assistance in this matter.

Please also tell me if you find the answer to this question. tanerszr@hotmail.com
thanks

Carlcarlos
07-22-2012, 07:21 AM
I have an asrock and have completely ballsed it. It used to automatically boot to xbmc but now it won't. How do I wipe the whole system and then load Ubuntu from scratch... Can anyone help me with an idiots guide as I am clueless with computers

Carlcarlos
07-24-2012, 03:04 AM
Ok I have completely broken my asrock that is set up as a direct boot into xbmc.

How can I reset to factory settings I.e completely remove everything including any is and restart using Ubuntu ? Please help, its either this or I will have to go over to the mac mini :-(

Mirzero
07-24-2012, 04:43 AM
Hello, i have a problem with my pc. In the begining the pc freezed with artefacts in program that used much of the gpu (9800gtx).So i've unistall the drivers of the video card to older version with temporary result;s in the end pc freezed with artifacts. I had the eror 43 in device manager at my video card and in Event viewer it was a error related to WMI.I removed the video card, dust cleaned, slot changed, change power cables and artefacts where present in bios screen entered in windows and the freezed. I've tried with the onboard video card and bios/windows screen worked with any problems. From what i've readed/tested video card was broken.
I've saw a method with updating bios so i give a try, maybe it reslove my video card issue.
I.ve updated the bios of my motherboard: Asrock Extrem 3 Gene 3 at version 2.3 the operation was succesufull ,i/ve restarted as demanded, didn't removed the stick(with bios flash), and i heard a long beep, then pc shutdown and powered on (fans spined for a second) for 3 times this cycle 4 th time started with the new bios enter in windows. Now i have the same problem: pc starts fan's work for a second and then shutdown and again powered on, sometimes enter's in bios screen and windows . I.ve removed all the components mounted only the cpu and rams like in a starting build (i use the onboard video card).I removed the motherboard and place it on a cardboard mounting the components one by one and still no result, i;ve tested the source with 2 wired conected on green and black, 24 pins cable and it works fan spins. When the pc finaly starts (After 1 on/off or 2 times maybe more) dont make any boot sounds (beep).
What i've found out : - pc power on normaly without rams ( and make the beep - no rams ) / when i remove the 8 pins (2 X 4 pin cables) it powers on correctly.
Now it doesnt boot up at all.
Sorry for bad english /writing

LE: I.ve tested memory with memtest86+-4.20 no eror no nothing
REset CMos - batery removed - no improvment
Bios date after cmos reset/ power on/off cycle - no change
I'm sure the problem relates to bios upgrade (even it was sucesufull), but until i test with a diferent power source i can be 100% sure.
It comes very helpfull if you can give some advice/ opinion, maybe i passed something.
Thank you!

Friend_LGA
07-29-2012, 12:16 AM
Dear Asrock Support Team,

I am really need information about supporting AHCI mode by P5B-DE motherboard. It's very important for me and I can't find any information about it! Please help me.

Best Regards,

Grigory.

Quietruck
07-29-2012, 02:07 AM
Hello TweakTown Geeks, I have a question. I am planning (http://forums.tweaktown.com/#) on purchasing an FX 8150 8 core Processor to complete my new<nobr id="itxthook1w2nobr" class="itxtrst itxtrstnobr itxthooknobr" style="float: none; left: auto; right: auto; top: auto; bottom: auto; border: none; background-color: transparent; position: static; white-space: normal; font-family: inherit; margin: 0px; padding: 0px; ">computerhttp://images.intellitxt.com/ast/adTypes/4.gif</nobr> (http://forums.tweaktown.com/#) build. For memory I am using Adata DDR3 2000. On my 990FX Extreme 4 Motherboard will this combination "Play Nice" together? As in will I be able to run my memory at manufacturers specs of 2000 Mhz? Any help or suggestion will be appreciated.:facelick:

mirecek1965
07-29-2012, 12:49 PM
You ask useless question. RAM will be clocked at speeds which is in SPD chip, and when it support XMP (extreme memory profile), you must turn this ON in bios itself. Motherboard must support XMP too. Best regards.

parsec
08-12-2012, 12:45 PM
WRONG!!
ASRock TSD - Emily responds to posts from time to time and helps troubleshoot issues.

A very common problem is that the poster does not take the time to create a detailed hardware list with brand names and model numbers.
We are not mind readers.
Providing detailed information about your system will save time and possible errors.
It is a waste of everyone's time when you only list your information in the first post.
Many of us are helping in many threads at the same time and don't have time or patience to go searching back through the thread to try to find the hardware details.

You should create a new thread with a meaningful title that briefly describes the problem and includes the motherboard (or other hardware) model name.


We can best help you after you create a detailed hardware list in the PC Specs portion of your
forum profile http://forums.tweaktown.com/profile.php?do=editprofile at the bottom of the
profile page or in your forum signature http://forums.tweaktown.com/profile.php?do=editsignature.
Be sure to include brand names and model numbers.

You're right, I should have written thread when I wrote forum. Let's look at my post again...


Sean has not posted in this thread or forum for a very long time. What happened to him? We have no idea. Don't bother waiting for a reply from him or anyone else from ASRock in this thread, that will not happen, sorry to say.

Your best option is posting a new post/thread about your issue in the forum itself, and you might get some help from another forum member. ASRock is NOT reading or responding to anything in this forum. Good Luck!

You referred to my last sentence above, and so am I. I'm glad that we agree about the best method to get some assistance by posting a new thread, with detailed system information.

My main point is that Sean is no longer posting in this thread and forum. Is it wrong to tell people that they are waiting for a response in this thread from Sean that will never come? Is it wrong to put people on a better path, so they will get help and not become upset with ASRock?

It's been three weeks since I posted in this thread, and since then there has been 12 posts in it, most of them addressed to Sean. Is it wrong to inform people that they are addressing no one? How would you feel if you discovered you did the same thing?

Yes, ASRock TSD Emily does post in this forum. As of writing this, she did three days ago.

IMO, this thread should be closed, as it is serving no purpose, except to aggravate ASRock customers. A new sticky could be added, to instruct people how to get help in this forum, as you described in your post. Doesn't someone at ASRock know how to be courteous and show respect towards their customers?

Hueristic
08-16-2012, 09:01 AM
...

IMO, this thread should be closed, as it is serving no purpose, except to aggravate ASRock customers. A new sticky could be added, to instruct people how to get help in this forum, as you described in your post. Doesn't someone at ASRock know how to be courteous and show respect towards their customers?

I completely agree, I registered just to get help from Asrock support staff as I can find no other place (asrock homepage points here for support! :rolleyes:) ! thank you for your post as I now know not to waste my time here. :)

RobsM6S
08-26-2012, 12:23 AM
b

alireza_asol
09-11-2012, 02:23 PM
asrock z68 extreme3 gen3 drivers will update to windows 8?
what is difference between virtu mvp in z68 and z77?
thanks

asrock_z77
09-16-2012, 05:49 AM
Hello,
I have recently upgraded to a Z77 Extreme4 motherboard. My question regards my system memory/ram. The stock memory clock on this board is 1333mhz. My Corsair Dominator GT is 2133 mhz @ 1.5v. When I attempt to adjust the mhz in bios to the 2133mhz point. My system encounters blue screens on reboot. My question is: Would someone mind providing a guide on overclocking my memory to 2133mhz. Do I need to adjust the voltage? Thank you.

Skillz99999
09-16-2012, 04:05 PM
im having a problem on playing 720 videos, it has a SH1TTY graphics(sorry for the word), it has low fps or pixelized, I already tried to change the shared vga graphics to 1gb but still no luck

I already tried changing media player, also tried to play different video that is 720p but i still get the same results

here is my system specs

Note:
My previous specs is
Intel C2D 2.13Ghz
4gb ddr3
G31 Mobo

But it can play 720/1080p movies SMOOTHLY


Current Specs:

Windows 7 64 bit
Intel 3470 3.2Ghz
2x4GB Gskill ares ddr3 1600 cl9
ASROCK Z68M/USB3

bruveiker
10-07-2012, 02:27 PM
Hello.
Anyone know if the new BIOS 2.20 for z68 extreme 4, repaired the bsod A clock interrupt was not received on a secondary processor..."?. BlueScreenView shows bug check code of: 0x00000101.
So far the only way to be stable was raising the Vcore to 1165 v.
thanks.

dxhuffma
10-14-2012, 12:33 AM
This morning I discovered that my motherboard is no longer booting. I have had this machine up and running for a few months now and am hoping I don't have to replace the board. When I try to power up the PC, the PSU simply starts, spins the fans for a second, then shuts down. I have tried this with an ABS 1050 and Corsair 750 PSU. I have also done the, take it apart, pull the battery and wait route as well. There is still no change. I am not sure what to do next.

ASRock X79 Extreme9
i7-3820
16gig Corsair Vengeance
120gig OCZ Revo PCI-E SSD
ABS 1050 PSU

if you need the rest of the system I will happily relay it.

Thanks

parsec
10-17-2012, 02:32 PM
ATTENTION ALL THOSE POSTING IN THIS THREAD!!

You'll have a much better chance of getting some help if you post a new post/thread in the main forum, below this thread.

AMD4Me
10-20-2012, 07:47 AM
Wow, I joined this forum specifically because Asrock list it as an official Asrock supported forum yet I only see a few replies from Emily in recent days. Nothing against Emily but Asrock doesn't have a forum of their own and a few comments here certainly doesn't constitute "official customer support", IMO. As the many posts show, Asrock customers are looking for official answers and not general troubleshooting information.

Even though many members here try to help, they certainly do not have access to the engineering data and other technical resources that Asrock tech support should have. This makes it almost impossible to get accurate technical data from Asrock as their website tech support is basically non existent in my experience. I was hoping this was finally a means to get official Asrock tech support.

This is VERY disappointing for Asrock customers and I can't imagine how Asrock expects us to support them with future purchases if they don't support us with technical / engineering information on products we currently own.

As an example, I'd like to know the CPU power supply current or wattage capacity for the Fatal1ty 990FX Professional mobo as I plan to upgrade to a Vishera FX-8350 and OC it to the max. Even though the CPU power supply circuit is 12+2 phases, that does not tell us anything about it's current capabilities or limits which have proven to be a limiting factor on some mobos when the FX 8xxx model CPUs are OC'd, because the CPU power supply is insufficient.

A 12+2 power phase CPU power supply just means that the CPU power supply RIPPLE to the CPU is reduced. It does not mean the CPU power supply capacity is significantly greated than the minimum 125w required by AMD for the AM3+ mobos. FX 8xxx CPUs draw a lot of power when OC'd above 4 GHz. and a borderline CPU power supply circuit can undermine high end overclocking efforts for current FX and Vishera model CPUs. This isn't what I would expect from the top of the line Fatal1ty Professional mobo, but it could very well be an issue.

Gaujinux
10-28-2012, 05:24 AM
hi i have a problem with Asrock fatality 990fx
i have assemble my pc.. but pc not loading .turn on all fans working but not loading nothing screen is empty black rams not loading . i can see it because they is with leds indicators .. whats the problem can be
tahnks

TaufiqM
10-29-2012, 11:50 PM
Hi All,

Thank you

Pat Man
11-08-2012, 06:15 PM
Hi there, I've moved my question here in the hope of getting some input and support as I've had no luck in the general forum. Is there any ASRock support personel here to help me? :
I'm at a loss so thought I'd give you knowledgeable heads a go as I'm on the verge of RMA'ing my Mobo. It's been working beautifully until I tried to add a 2nd or 3rd VGA card for CrossFiring and folding. The Mobo won't recognise any other VGA cards in any but the 1st pcie slot. I've tried 2 x HD5970's and 2 x HD5870's but the 2nd cards are not detected. All the cards work fine when placed in pcie slot 1 singularly. Here's a list of what I have done so far to resolve the issue:

Updated bios - latest 2.30 installed
Updated Radeon drivers - latest installed
Re-installed all drivers
Re-installed OS
Re-seated all cards in all slots
Cleared cmos
Disabled on-board graphics in bios
PCIE is set to primary in bios
Extra Molex is connected to Mobo as per instructions
Disabled Vitu
Changed PSU
Checked & re-checked all connections
Banged my head against a wall vigourously

I've noticed that the last two bios updates from ASRock are addressing this issue, so have I bought a multi vga board that will only work with 1 vga?! I would really appreciate any input or suggestions guys, thanks in advance.

PS: I've been building PC's for years, and have never come across this issue before. Stumped.

EDIT: Anyone got any ideas? Someone from support maybe??
Last edited by Pat Man (http://forums.tweaktown.com/posthistory.php?p=442481); 14 Hours Ago at 08:35 PM. Reason: 7 hrs later.....no replies yet.

Edit2: I have also contacted ASRock through their online support portal - as of yet I have heard nothing. I'm beginning to think that ASRock does not have even a basic customer support program judging by other threads on this forum, I hope I am proved wrong.

vettori
12-26-2012, 06:07 PM
Hi!
I want to buy z75pro3, but my power supply has 4pin power connector and i am using corei3 2100 and it doesn't consume much power neither i am gonna overclock it, so can i just plug in 4 pin plug in 8 pin socket of motherboard.I am soon gonna buy Asus hd6870 it has 2 6pin power connectors so i am gonna use both molex connectors to manage another 6pin connector so i am left with only 4 pin connector.So as i mentioned above my question is can i plug in 4pin plug into 8 pin socket of mother board,if yes then on which side of 8 pin socket of board?(my PS has a 6pin and a 4pin power connector)

- wardog -
12-26-2012, 06:37 PM
Hi!
my question is can i plug in 4pin plug into 8 pin socket of mother board,if yes then on which side of 8 pin socket of board?

ftp://174.142.97.10/manual/Z75%20Pro3.pdf <- See page 36

Decenew Otto
12-30-2012, 09:24 PM
hello everyone
this is my spects

Operating System
Microsoft Windows 7 Ultimate 32-bit SP1
CPU
Intel Core i7 3770K @ 3.50GHz 38 °C
Ivy Bridge 22nm Technology
RAM
4.00 GB Single-Channel DDR3 @ 677MHz (9-9-9-24)
Motherboard
ASRock Z77 Extreme4 (CPUSocket) 39 °C
Graphics
Generic Non-PnP Monitor (1280x1024@60Hz)
ATI Radeon HD 4800 Series (ATI AIB)
Hard Drives
298GB Seagate ST3320620AS (SATA)
Optical Drives
HL-DT-ST DVD-RAM GSA-H30N
Audio
Realtek High Definition Audio




My problem is with usb(universal serial bus) driver...windows can't fined the drivers for usb...and this affect my printer hp photosmart 5510...
Can anyone help me? thank you much5402

Clandestinodz
01-07-2013, 04:51 PM
Hi ASRock Sean,

I'm new in the forum, and I have a question regarding the LSI RAID 0 mode.

My spec are as follow
x79 extreme 11
I7 3930
4 SSD CORSAIR GT
SLI 680 GTX

My question is how can I configure my 4 ssd in RAID 0 ??

Best regards

Mustash
01-09-2013, 03:39 AM
Greetings Fellow ASRock owners,

I recently purchased the new roll-out FMA285X extreme6 based on the excellent reviews I read.
I was unable to find much on other than that on the board other than reviews....not that surprising...the board is a really new roll-out.

My build was delayed due to a long delay in receiving the RAM so I decided to do a little prepwork.

I was a little surprised that ASRock referred customers here and a LOT concerned when ASRock referred customers to a site that asks for an obscure verification response and consistently rejects the answer. I became EXTREMELY CONCERNED when I noticed ASRock referring customers to the (for cryin' out loud) dealer with other questions and worse, RMA's and repairs!

Today I ran into a post by parsec on this thread where he observed that ASRock Tech Support doesn't even exist in any meaningful way!

That SUX on SO MANY LEVELS

Purchasers are justified in having an expectation of expert mfr. technical support. That doesn't mean I don't appreciate the input from fellow users but c'mon! This product has some weird bugs which would certainly defeat many builders.

As it turned out I had to RMA the board because a Windows install kept on going into an endless loop. maybe there was a simple workaround.

How disappointing!

divedancer
01-14-2013, 03:07 AM
Hi Sean, can you recommend an onboard wifi card for my asrock p67 extreme4 gen3 ,
did not realise that this board did not have built in wifi !!!
Thanks

Mustash
01-14-2013, 04:05 AM
divedancer,

Most motherboards, in fact most desktops don't come with WiFi.

Depending on the distance from the access point, your Internet speeds and your router capability there could be a lot of choices.
You could install a PCI card which come with 1 - 3 "rubber duckie" antennae extending beyond the back of your computer or you might be able to get away with a USB "dongle" and avoid getting into the computer.

You could go with the high priced spread such as a D-Link or you can just shop the specs.
Either way they're not that expensive.

I would get a b/g/n capable of 300 MB/s no matter what brand. Beyond that it's a range & extra features issue.

Bear in mind that whatever device you buy it will only function at the lowest common denominator level.
In other words if you get an "N" capable device for your computer and the computer or router you are connected to is b/g you will max out at 57 MB/s connection. Even if you have a 300 MB/s connection, if you are accessing a modem/router w/a 1.5 Mb/s
Inet connection speed, that's the throughput you'll get.

You might Google WiFi PCI or WiFi USB for comparisons or look at a retailer like NewEgg and read the user ratings & specs to compare them.

Good Luck!

TheUSMale2
01-15-2013, 07:12 AM
Was using Virtu mvp2 with no problem. upgraded bios to newest 2.30 ROM & now my computer can't find my Intragrated video chip. uninstalled the virtu, then reboot, tryed to reinstall. it tells me it vid chip doesn't exist.
therefore no VIRTU. help. :ponder:
Intel Core i5 2500K
Windows 7 Ultimate Edition 64-bit SP1 (Build 7601)
CPU Arch : 1 CPU - 4 Cores - 4 Threads
CPU PSN : Intel Core i5-2500K CPU @ 3.30GHz
CPU EXT : MMX, SSE (1, 2, 3, 3S, 4.1, 4.2), EM64T, VT-x, AES, AVX
CPUID : 6.A.7 / Extended : 6.2A
CPU Cache : L1 : 4 x 32 / 4 x 32 KB - L2 : 4 x 256 KB
CPU Cache : L3 : 6144 KB
Core : Sandy Bridge (32 nm) / Stepping : D2
Freq : 4989.27 MHz (99.79 * 50)

MB Brand : ASRock
MB Model : Z68 Extreme3 Gen3
NB : Intel Sandy Bridge rev 09
SB : Intel Z68 rev B3

GPU1 Type : Intel HD Graphics 2000 (GT2)
GPU1 Clocks : Core 850 MHz / RAM 0 MHz
GPU2 Type : Radeon HD 5770
GPU2 Clocks : Core 399 MHz / RAM 1200 MHz
DirectX Version : 11.0

RAM : 8192 MB DDR3 Dual Channel
RAM Speed : 1064.4 MHz (1:8) @ 9-11-10-28
Slot 1 : 4096MB (12800)
Slot 1 Manufacturer : G.Skill
Slot 2 : 4096MB (12800)
Slot 2 Manufacturer : G.Skill

randini
01-20-2013, 10:37 AM
will asrock be coming out with windows 8 drivers or is there a way to use the windows 7 drivers on windows 8? I have a P67 Fatal1ty pro.

Gabrix78
02-09-2013, 04:11 AM
Hello everyone, I'm Italian so I apologize if my English is not perfect, I am writing because I have a ploblema with my asrock Z77 extreme9 as I have just installed 2 msi gtx 670 pe / oc in sli and I'm having big problems shots in any use windows / games and benchmarks, I tried cards also singolarmete and all ports pci-e motherboard and everything worked perfectly but once you put them back in sli go bad and you continue to lock the pc, I I think it's the bios of extreme9 to have problems on the management of two cards in the pci-e 3 16x/16x. Give me your opinion thanks

- wardog -
02-09-2013, 05:54 AM
Hello everyone, I'm Italian so I apologize if my English is not perfect, I am writing because I have a ploblema with my asrock Z77 extreme9 as I have just installed 2 msi gtx 670 pe / oc in sli and I'm having big problems shots in any use windows / games and benchmarks, I tried cards also singolarmete and all ports pci-e motherboard and everything worked perfectly but once you put them back in sli go bad and you continue to lock the pc, I I think it's the bios of extreme9 to have problems on the management of two cards in the pci-e 3 16x/16x. Give me your opinion thanks

Gabrix,

Please go to Tech Support from Vendors - ASRock (http://forums.tweaktown.com/asrock/) and create a new thread outlining your problems. Where your post above ended up is the incorrect place with which to look for help.

Also, Please go HERE (http://forums.tweaktown.com/profile.php?do=editprofile), scroll down and fill in the "System Specs' so that we know what you have there system-wise.

I'll post a suggestion or two to you when I see your new thread that may be of help.

barneybear69
02-12-2013, 06:30 AM
Hi,
I have an Asrock ion 330 with Intel Dual Core Atom™ 330 processor.
The processor fan has just started to whine.
Do you know where I can buy a replacement fan in UK?
Also I'm not sure how to remove it from the MB

Thanks in advance for any help.

TheUSMale2
02-12-2013, 07:16 AM
:Whatever_ EVERCOOL MCI01-510EA CPU Cooler Crotch Fin Provides more Heat Dissipation Area For Intel Processors - Newegg.com (http://www.newegg.com/Product/Product.aspx?Item=N82E16835119171&nm_mc=KNC-GoogleAdwords&cm_mmc=KNC-GoogleAdwords-_-pla-_-CPU+Fans+%26+Heatsinks-_-N82E16835119171&gclid=COXyw7y-r7UCFa1AMgodIXEAEA)

TheUSMale2
02-12-2013, 07:25 AM
:Whatever_ I read,... u just new to find a big northbridge cooler with a copperbase. I do not know how much space clearance u have so this is all I know to do as for UK your guess is a good a mine.

barneybear69
02-13-2013, 07:27 AM
:Whatever_ EVERCOOL MCI01-510EA CPU Cooler Crotch Fin Provides more Heat Dissipation Area For Intel Processors - Newegg.com (http://www.newegg.com/Product/Product.aspx?Item=N82E16835119171&nm_mc=KNC-GoogleAdwords&cm_mmc=KNC-GoogleAdwords-_-pla-_-CPU+Fans+%26+Heatsinks-_-N82E16835119171&gclid=COXyw7y-r7UCFa1AMgodIXEAEA)
Thanks very much but now that I have it stripped down it appears the fan is 30mmx30mm x 10mm deep.

- wardog -
02-13-2013, 07:06 PM
Thanks very much but now that I have it stripped down it appears the fan is 30mmx30mm x 10mm deep.

Is that a roundabout question? Or a statement?

barneybear69
02-14-2013, 07:32 AM
Sorry for not making my reply clear.
The Usmale2 was quoting a 50mm fan whereas the one I require is 30mm.

Hope that makes more sense.

Regards

shearminator
02-24-2013, 02:23 AM
can anybody help? I have version 1.23 ASROCK Instantboot and my motherboard is the k10n78d runnign windows xp sp3. the other night my computer did the normal update and shut down but when ASROCK instantboot re started the computer it never shut down and now I can't shut it down with instantboot only now if I disable it. also on the blue instant control panel the enable buton appears to be missing?

michalo21
03-23-2013, 08:26 PM
Hello ;)

I have one question. Does motherboard ASrock 870 Extreme3 R2.0 supports a AMD FX 6300 ?

keith harbaugh
03-29-2013, 09:41 AM
I have an asrock 990fx extreme 4 . I wanted to see where i go to report broken bios. I use version 1.8. But i tried the new 2.00 and found few broken settings. on/off technology is not working, when i set it to off the usb hard drive and my lan continue to stay powered after shut down, but on bios 1.8 when i shut it off , the usb hard drive and lan power down after shut down as i wanted. Also the new FAST BOOT causes windows to crash when entering and restarts. I understand that ULTRA FAST BOOT is only supported by windows 8, but the regular fast boot should function properly and is not.

keith harbaugh
03-29-2013, 10:10 AM
I have an asrock 990fx extreme 4. My question is about the load line calibration (LLC). With llc set at 1/2, my lowest stable volatge is 1.425 for my over clock. When i apply full load via prime95, cpuz shows a DROP to 1.34 volts. Now, when i set llc to 1/4 my lowest stable voltage is now 1.375 and when loaded prime 95 ,again the voltage DROPS but by a smaller margine to 1.36. Here's the weird part, when i set llc to disabled, my lowest stable voltage is now 1.33 and when loaded it JUMPS up to 1.38. Where i am confused, is llc is supposed to battle voltage droop, but if you look closely at what i stated, it is actually creating droop. When it is off, under load my cpu raises the voltage up a few like my nvidia gpus do when u apply a load. Lower voltage when at idle, and a tad higher when on load= no droop or countering it. It is very very odvious that asrocks version of load line calibration is not to battle droop but rather to stop cpus from getting to hot when under heavy load. I am noticing more and more with asrock that their boards are being designed for protection rather than performance! Please TECH, correct me if i'm wrong, or maybe i don't understand llc's purpose. The only other thing i can think of, is maybe my amd fx 6200 has a built in llc type function that is able to work with the mobo's llc off?

filip.cenic
03-29-2013, 10:22 PM
my motherboard is AS Rock h55m-le.i both patriot ram chips that should work on 1866 MHZ but from some reason they don't.My ram is still working on 1333 Mhz.How i can fix this one?

Bios version is p1.00-15a
Windows 7 x64

filip.cenic
04-03-2013, 02:22 AM
I got suggestion to update my bios version to new one.My old bios version was 1.0 and my new one is 1.8 for my asrock motherboard.Now my system is not stable it works for like 15-20 min and then my computer freeze i cant even reset it on the reset button,i only can turn of the power.When i updated my bios i pres f9 to load bios defaults i didin't mess anything within it.So what can cause this error and what should i do ?

topcd
04-05-2013, 11:39 PM
hi
here's my problem.recently i bought a 3TB h.d.d .i wanted to install win8 on GPT H.D.D(Hitachi HDS723030BLE640 3tb) but in the first step installing , setup said the win cant install on GPT disk . realized i must boot DVD disk Drive in UEFI boot mode .tried to do that with F11 and some setting on bios setup but failed. after search in web and put hand on some option on UEFI setup . i disappointed . the thing is that there is no option or item so i can boot in UEFI (not in AHCI MOde not IDE mode) . so what can i do to fix this ?

my E-mail:a_z1384@yahoo.com

motherboard: asrock 990FX Extreme 3
CPU: AMD Phenom II X4 965 3.4 GHz
RAM: 4Gig dual channel DDR3 1600
V.G.A: ATI 6700 1GB

keith harbaugh
04-06-2013, 06:40 AM
I got suggestion to update my bios version to new one.My old bios version was 1.0 and my new one is 1.8 for my asrock motherboard.Now my system is not stable it works for like 15-20 min and then my computer freeze i cant even reset it on the reset button,i only can turn of the power.When i updated my bios i pres f9 to load bios defaults i didin't mess anything within it.So what can cause this error and what should i do ?


Umm,since this happened after a bios update, this may or may not apply to you. But i have an asrock 770 and when i install the usb 3.0 driver the same thing happens to me. If i uninstall the driver and disable usb 3.0. Pc runs like a dream. I've tried installing and uninstalling it over and over. Same thing, installed my pc freezes solid,done. Now i'm sure your wondering what i'm getting at. The point is, a simple bad driver can do this to your pc. So maybe after your bios update, one of your drivers is corrupted as it may now see a different piece of hardware. IDK,but its possible.

fluek66
04-12-2013, 10:14 AM
Hi I am getting a 55 error on the Dr debug which in your manual means no memory installed. Ive had this board since 26/2/13 and was working fine till a few days ago when i turned it on and it came up with a 55 error. Now i tried installing my memory in to one slot at a time and still same problem.it seems like none of the memory slots are working. I also tried a different set of memory sticks from a friends pc but same fault. I also did a clear CMOS but same problem
All my BIOS setting are up to date which was 2.00 version
I also have reseated my cpu and have checked the pins and all looks fine.
Can you advise me what to do next??
I have emailed Asrock support but they were no help.

Many thanks

- wardog -
04-12-2013, 12:13 PM
Hi I am getting a 55 error on the Dr debug which in your manual means no memory installed. Ive had this board since 26/2/13 and was working fine till a few days ago when i turned it on and it came up with a 55 error. Now i tried installing my memory in to one slot at a time and still same problem.it seems like none of the memory slots are working. I also tried a different set of memory sticks from a friends pc but same fault. I also did a clear CMOS but same problem
All my BIOS setting are up to date which was 2.00 version
I also have reseated my cpu and have checked the pins and all looks fine.
Can you advise me what to do next??
I have emailed Asrock support but they were no help.

Many thanks

Seeing XSPC in your system specs, just a thought yet you might take into consideration what Splave recognized and corrected when his OC Formula was throwing the error 55.

Splave's post # 12 (http://www.xtremesystems.org/forums/showthread.php?282693-**-OFFICIAL-**-Asrock-Z77-OC-Formula-Overclocking-troubleshooting-Discussion&p=5131802&viewfull=1#post5131802)

parsec
04-16-2013, 07:20 AM
hi
here's my problem.recently i bought a 3TB h.d.d .i wanted to install win8 on GPT H.D.D(Hitachi HDS723030BLE640 3tb) but in the first step installing , setup said the win cant install on GPT disk . realized i must boot DVD disk Drive in UEFI boot mode .tried to do that with F11 and some setting on bios setup but failed. after search in web and put hand on some option on UEFI setup . i disappointed . the thing is that there is no option or item so i can boot in UEFI (not in AHCI MOde not IDE mode) . so what can i do to fix this ?

my E-mail:a_z1384@yahoo.com

motherboard: asrock 990FX Extreme 3
CPU: AMD Phenom II X4 965 3.4 GHz
RAM: 4Gig dual channel DDR3 1600
V.G.A: ATI 6700 1GB

UEFI booting/starting a PC is not a SATA configuration setting, and not related to it whatsoever.

I don't use your board, but look for an option called CSM (Compatibility Support Module), usually in the ACPI menu. You will find it is enabled. CSM causes the system to start/boot in "BIOS/legacy mode". To install Windows for UEFI booting, set CSM to Disabled.

If you don't have the CSM option, then look for Secure Boot in a Security or Boot menu. Enabling that should allow installing Windows for UEFI booting, given the appropriate version of Windows.

If you do not have any of these options, your board may not be able to UEFI boot. ASRock also provides a utility called "3TB Unlocker" that is supposed to allow using drives over 2.2TB to be used with a standard Windows installation. Does you board's download page have this utility?

MSXManiac
05-01-2013, 03:42 PM
The ASRock Technical Support forum is now open and ready for posts!

Please welcome Sean from ASRock who will be here to answer your tech questions related to all ASRock products.

When posting questions, please provide as much info as possible such as full system specs, what operating system and drivers you are using and please describe your problem as full as possible.

This is also an area you can discuss upcoming ASRock products and we will also conduct giveaways and competitions in here from time to time as well. ASRock may also share early BIOS updates and drivers with you here as well.

:thumbsup:

I'm post a problem here:

http://forums.tweaktown.com/asrock/50924-asrock-b75m-gl-freeze-after-updating-bios-not-permanent-brick.html


It's the reply. Have solutions to this issue?

APC1
05-04-2013, 02:18 AM
Hello

Excuse my english

I have a query(doubt) about Asrock Fatal1ty Z68 Professional Gen3 drivers

In Station-Drivers: le site de drivers, bios, firmwares avec un forum d'aide (http://www.station-drivers.com) where generally download the drivers i have seen that for

Intel Rapid Storage TechnologyI have 3 options to download


12.5.0.1066 WHQL (PCH5/6/7/8) - W 7-8 32.64 bits del 25/3/13

11.7.4.1001 WHQL (ICH9/10/PCH) - W 7-8 32.64 bits del 12/4/13

11.2.0.1006 WHQL (ICH7/8/9/10/PCH) - W XP-Vista-7-8 32.64 bits del 26/6/12



Station-Drivers: le site de drivers, bios, firmwares avec un forum d'aide (http://www.station-drivers.com/page/...ofesionnal.htm)

Here the link of drivers of this motherboard

Which one should I use and why?

Thanks and excuse my english one more time

RafaelMalizia
05-07-2013, 06:32 AM
Emily apologize for the inconvenience. I am Brazilian, I have problem with my ASROCK EXTREME 11, she presented the following error 1394 guid are invalid both CMOS and flash, do not know what it do, every time you start have to press f1 What do I do? help me

hotjase
05-08-2013, 02:30 PM
Hi,

I would like to ask about the AsRock Z77 Extreme4 Motherboard.

It states that Intel RAID UEFI is supported in P2.80 bios:
ASRock > Products > Motherboard > Z77 Extreme4 > Download (http://www.asrock.com/mb/download.asp?Model=Z77%20Extreme4&o=BIOS)
(Support Intel UEFI RAID configuration in BIOS setup.)

However, I am unable to see the Intel Rapid Storage Technology TAB when changing the controller from AHCI to RAID
(from youtube Video on Extreme6 bios demo)
ASRock New UEFI Technology - Faster Boot Speed for Your RAID system - YouTube (http://www.youtube.com/watch?v=Y1TbdVtAE9c)

Screenshots

Z77 Extreme4 BIOS P2.80
ASRock > Products > Motherboard > Z77 Extreme4 > Download (http://www.asrock.com/mb/download.asp?Model=Z77%20Extreme4&o=BIOS)

Any help on this is greatly appreciated.

Thanks,

Jason
5824

ASRock BIOS Page that states 2.80 supports Intel RAID UEFI

hed1n
05-10-2013, 10:02 PM
Hi there. I have Asrock FM2A75 pro4 motherboard. And Ultra Fast boot dont work here. When i choose Ultra Fast boot, after reboot is loading UEFI setup page, not windows 8.
What i need to do? Wonna use Ultra Fast Boot.

drojdieru
05-19-2013, 02:48 AM
hello Sean

i've just put up a new system and i am having dificulties trying to get the rams to work properly.

system:asrock 990fx xtreme3,corsair tx650,gskill sniper 2x4/1866,asus radeon hd 7850 1gb,seagate barracuda 500/7200,bios 1.5,os win7/64/sp1

well the problem is computer boots with just 1 ram stick on,when i put the other ram stick screen remains black and wont boot anything,i tried switching them in all combinations possible but i get the same result.
and when i manage to make both of them to work,bios reconises them,windows same...everything works good untill i shutdown and turn on pc again.then i get again a monitor black screen and wont boot anything.


any suggestions,ideas,something that might lead to a result is more than welcome.
i am out of ideas:)

cheers

parsec
05-19-2013, 12:55 PM
ASRock users, Please post your issues in a new thread in the ASRock forum itself, not in this thread.

This thread is not being officially used anymore, and you'll have a much better chance of getting help by posting a thread of your own.

beni7192
05-20-2013, 03:43 PM
Hi!
usb 3.0 ports in my 990FX Extreme3 have probelem because of Etron drivers!

http://easycaptures.com/fs/uploaded/640/thumbs/7058462199_b.jpg


when I install etron windows 8 driver usb 3.0 controller name hide from list & ports dont work yet!

http://easycaptures.com/fs/uploaded/640/thumbs/6506453342_b.jpg

Iam useing latest bios
What shold I do???

chrissyy2009
05-24-2013, 07:24 PM
Hi, I have an Asrock 990FX extreme3, 16 gb 1333 MHz normal sized ram, a NZXT phantom 3.0 full tower and an XFX HD 6970 GPU. I want to upgrade my heatsink. I was looking at the Zalman CNPS11x etreme and Xigmatek's Thors hammer. Will they fit? Or will they block the RAM? If I opted for Thors hammer I would also put a fan on it. Also what is the highest MHZ RAM this board can use and which Bios update would I have to install to enable it?

cliftonclan
05-25-2013, 12:00 AM
I just Installed a N68C-GS FX motherboard. After the install and getting around the HP Code Purple Bull ^%#$ The Chassis Fan Has continued to run at a high rpm. Yes it is very load.
I went into the Dos Settings and enabled the controls and set to option #3. Also went to Asrock OC turner and done the same.. Still Fan IS running. Still Very Load. Please help Getting on my Last nerve...







The ASRock Technical Support forum is now open and ready for posts!

Please welcome Sean from ASRock who will be here to answer your tech questions related to all ASRock products.

When posting questions, please provide as much info as possible such as full system specs, what operating system and drivers you are using and please describe your problem as full as possible.

This is also an area you can discuss upcoming ASRock products and we will also conduct giveaways and competitions in here from time to time as well. ASRock may also share early BIOS updates and drivers with you here as well.

:thumbsup:

cliftonclan
05-25-2013, 06:17 AM
Is It An HP or Compact

Beeeno
06-06-2013, 09:46 PM
Hi Sean !! I've just opened a thread for troubles with my new rig based on Z77 Extreme6. Hope U ore some other expert could help me! THX !!! :)