*
I have a RR622 HIghPoint , that is the same chip , on this card only chip 88se9128 and some composants as normal CLK generator , buffer , spi flash eeprom and connectors in PCB
Why motherboard's with 88se9128 cannot support this fine options ok with RR622 card ?
A - ports multipliers ( number * 2 enclosures )
B - 4 disks by enclosure ( total 8 disks )
C - RAID 0 , 1 , 5, 10
**
i think that Asrock company have some Marvell developpement tools for 88SE91XX ???
*************************************
for me i have 2 * little PCI-e ASROCK SATA3 cards ( 88SE9123 )
i have hacked firmware with SP1213 all option flash ( go -v )
after SP1208 ( go -a ) only old -autoloader because when i plug ASROCK cards and RR622 in same time the HighPoint card cannot find disks with original firmware !!
after this i can mount RAID 0 , 1 and use Marvell MRU 1610
* you can found SP1208 & SP1213 to station drivers site ( bottom page ) :
Marvell drivers
** a little problem after i cannot see ASROCK sata3 bios/firmware , not a big problem because i have not OS connected to the ASROCK card but for the fun , i search solution
************************************************** ************************************************** **********
Pierre
I have a RR622 HIghPoint , that is the same chip , on this card only chip 88se9128 and some composants as normal CLK generator , buffer , spi flash eeprom and connectors in PCB
Why motherboard's with 88se9128 cannot support this fine options ok with RR622 card ?
A - ports multipliers ( number * 2 enclosures )
B - 4 disks by enclosure ( total 8 disks )
C - RAID 0 , 1 , 5, 10
**
i think that Asrock company have some Marvell developpement tools for 88SE91XX ???
*************************************
for me i have 2 * little PCI-e ASROCK SATA3 cards ( 88SE9123 )
i have hacked firmware with SP1213 all option flash ( go -v )
after SP1208 ( go -a ) only old -autoloader because when i plug ASROCK cards and RR622 in same time the HighPoint card cannot find disks with original firmware !!
after this i can mount RAID 0 , 1 and use Marvell MRU 1610
* you can found SP1208 & SP1213 to station drivers site ( bottom page ) :
Marvell drivers
** a little problem after i cannot see ASROCK sata3 bios/firmware , not a big problem because i have not OS connected to the ASROCK card but for the fun , i search solution
************************************************** ************************************************** **********
Pierre
Comment