No announcement yet.

P43DE memory settings.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • P43DE memory settings.

    Hello. I recently installed this motherboard into my system as a replacement. The type of Ram is OCZ ( OCZ2N800SR2GK ) ddr2 pc-6400. The problem I'm having is system stability with 4 sticks of ram. With 2 sticks everything passes memtest, prime 95, intel burn test. I was able to do a fresh install of windows. As soon as I use all 4 sticks, the system boots into bios fine, but memtest freezes ( no errors just freezing ) and windows bluescreens on every boot. I go back to 2 sticks and all is well again. I've tested both pairs in memtest to no errors. I'm hoping it's just a memory setting in bios I'm missing somewhere.

    Any help would be appreciated. Thank you for reading.

  • #2
    Re: P43DE memory settings.

    This is going to make me sound like a complete novice, but where is the command rate (1t/2t) setting in the bios on this board? I've seen it in bios for other boards, but for the life of me cant find it here.

    Comment

    Working...
    X