Announcement

Collapse
No announcement yet.

Poor Raid Performance (Gigabyte P55A-UD3)

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Poor Raid Performance (Gigabyte P55A-UD3)

    Hi guys, I bought a new pc and make raid0 with 2x500GB (Samsung 501LJ 16MB Cache 7200rpm), but i have poor RAID 0 performance... don't know why...

    My system specs:

    Core i5 750
    Gigabyte P55A-UD3
    Samsung 2x500GB
    GTX470

    I Make two slices (100GB and 892GB), the two HDs have SMART, NCQ, Write Cache enables.

    Screens with HD Tune:

    First Slice (100GB)


    Please help, I don't know what to do... I already update BIOS, drivers, rebuild raid....
    Attached Files
    Tags: None
  • #2
    Re: Poor Raid Performance (Gigabyte P55A-UD3)

    Disable USB 3 and SATA 6 and see if that helps.

    Are you using two graphics cards or one?

    Do you have the array setup on the first blue Intel ports (SATAII_0 and SATAII_1)?

    Comment

    • #3
      Re: Poor Raid Performance (Gigabyte P55A-UD3)

      I disable the USB3 and Sata3 on BIOS e the same thing happen...

      I'm using the HDs on SATA2_0 and SATA2_1 the two first port.

      Comment

      • #4
        Re: Poor Raid Performance (Gigabyte P55A-UD3)

        I made raid0 again with one slice (1000TB all 2x500GB with 128K strip)



        I don't know what to do more... Think maybe one HD is bad or somenthing.
        Attached Files

        Comment

        • #5
          Re: Poor Raid Performance (Gigabyte P55A-UD3)

          Hmmm, yes please test each drive one by one to be sure they both act the same.

          Comment

          • #6
            Re: Poor Raid Performance (Gigabyte P55A-UD3)

            LoL I'm confuse. I disable and delete de RAID and when i go to install W7, i see all my partitions from my HD before i made the RAID, they have all my DATA....

            When i made the RAID i formatted the HD..

            Maybe the poor performance on RAID its because the fragmented data on this HD?
            Don't know..

            Anyway I installed W7 again without RAID, and make some benchs.

            First partition with W7 Sata port 0 (2_0)



            Second partition (With have my all Data, I remade one partition and format this)



            Don't know what to do now.
            The raid performance is right or not?
            My HDs have some problem?

            Comment

            • #7
              Re: Poor Raid Performance (Gigabyte P55A-UD3)

              Not sure what is going on?

              I'd low level format each one, then try the RAID again

              Comment

              Previous template Next
              Working...
              X