No announcement yet.

P6X58D-E & i7 930 OC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • P6X58D-E & i7 930 OC

    I am starting to look into doing some overclocking to get my system up to 4.0ghz stable. I found the following settings and wonder if they are suitable for my system. All suggestions welcome.

    I found the following settings. Do they make sense for my system? What other adjustments should be made? I am trying for 4.0 stable.
    Silverstone FT02
    ASUS P6X58D-E i7 930
    Kingston Non-ECC 1600MHz Unbuffered (DDR3, 1.65V, CL9, FBGA, Gold)
    Xigmatek DarkKnight
    Kingston SSDNOW 128gb
    WD Black 500gb
    Windows 7 Professional 64bit.
    ASUS ATI Radeon 5850

    Ai Overclock Tuner.....................[Manual]
    CPU Ratio Setting......................[21.0]
    Intel(r) SpeedStep(tm) Tech............[Disabled]
    Xtreme Phase Full Power Mode...........[Enabled]
    BCLK Frequency.........................[181]
    PCIE Frequency.........................[100]
    DRAM Frequency.........................[DDR3-1451MHz]
    UCLK Frequency.........................[2903MHz]
    QPI Link Data Rate.....................[Auto]

    CPU Voltage Control....................[Manual]
    CPU Voltage............................[1.25625]
    CPU PLL Voltage........................[1.84]
    QPI/DRAM Core Voltage..................[1.24]
    IOH Voltage............................[1.20]
    IOH PCIE Voltage.......................[1.50]
    ICH Voltage............................[1.20]
    ICH PCIE Voltage.......................[1.50]
    DRAM Bus Voltage.......................[1.66]
    DRAM DATA REF Voltage on CHA...........[Auto]
    DRAM CTRL REF Voltage on CHA...........[Auto]
    DRAM DATA REF Voltage on CHB...........[Auto]
    DRAM CTRL REF Voltage on CHB...........[Auto]
    DRAM DATA REF Voltage on CHC...........[Auto]
    DRAM CTRL REF Voltage on CHC...........[Auto]

    Load-Line Calibration..................[Enabled]
    CPU Differential Amplitude.............[800mV]
    CPU Clock Skew.........................[Delay 300ps]
    CPU Spread Spectrum....................[Disabled]
    IOH Clock Skew.........................[Auto]
    PCIE Spread Spectrum...................[Disabled]

    C1E Support............................[Disabled]
    Hardware Prefetcher....................[Enabled]
    Adjacent Cache Line Prefetch...........[Enabled]
    Intel(r) Virtualization Tech...........[Disabled]
    CPU TM Function........................[Enabled]
    Execute Disable Bit....................[Enabled]
    Intel(r) HT Technology.................[Enabled]
    Active Processor Cores.................[All]
    A20M...................................[Disabled]
    Intel(r) SpeedStep(tm) Tech............[Disabled]
    Intel(r) C-STATE Tech..................[Disabled]

    Core Speed 3800.7 Mhz
    CL, tRCD, tRP 8clocks tRAS 24clocks
    tRFC 74clocks Command Rate 2T
    Last edited by ChuckR; 02-06-2011, 12:53 PM.

  • #2
    Re: P6X58D-E & i7 930 OC

    You should just raise your bclk,your CPU voltage looks enough for 4ghz,enable pcie and CPU spread spectrum too,I find it doesn't affect stability,I have that mb clocked at 4.2ghz but I'm using voltage offset for CPU so that it only clocks to 4.2 at load and throttles down when idle

    Qpi/vtt voltage should be around 1.3-1.35v at 4ghz
    Last edited by wazza300; 02-06-2011, 06:37 PM.
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

    Comment

    Working...
    X