PDA

View Full Version : need help in overclocking my 1.6 with SiS 735 chipset



utisinger
10-31-2002, 10:04 AM
:no:

i cant seem to be able to overclock it
dont know where to start or anything
can someone go step by step with me on how to do this?
id read the guide TT has on overclocking amd but the guide doesnt apply to mine
can anyone help me?

Wiggo
10-31-2002, 10:20 AM
It's likely that your current BIOS doesn't support the limited overclockin' available but if you feel up to flashing the BIOS then here (http://forum.ocworkbench.com/ocwbcgi/ultimatebb.cgi?ubb=get_topic&f=27&t=003724) is probably one of the 1st places that I'd go for the BIOS file that you'd need. I'd go thru that whole thread 1st then maybe look at few more there to see if there are any issues with them but that place would have to have the most complete info on that motherboard and chipset. ;)

Good Luck :thumb:
<center>:cheers:</center>

utisinger
10-31-2002, 10:29 AM
:no:
whats flashing the bios?

Wiggo
10-31-2002, 10:43 AM
Then read this guide on Updating/Flashing BIOS (http://www.pcmech.com/show/bios/81/) and if you don't go much on that and can't find someone to do it for you then you could always mod the bridges on the CPU to change it's specs' hard coding (http://www.ocinside.de/html/workshop/socketa/xp_painting.html) and if I find a "how-to" guide to better show that whole technique I'll post it here for ya (you can play with that interactive guide to show the different sets of multiplier and voltage bridge combinations to achieve different overclocks). ;)

Be warned though that both practices have the probability to destroy the part that ya workin' on. : peace2:
<center>:cheers:</center>

SegiY
10-31-2002, 10:44 AM
The BIOS is the inatial thing that gives your computer instructions on how to boot and run, when you flash it you normally update it to ad stabilaty and updates and more features.

[edit: you beat me wiggo, i have to learn how to type quicker :geek: ]