http://www.gskill.com/en/<wbr>product/f3-10600cl9d-16gbnt-
Set dram voltage for 1.550 to 1.500 as they are 1.5V
Got a start error
The following Channel memory did not pass cpu memory please remove the memory then plug again
Channel A
with 4 beeps
We are going to reseat the graphic card now and see no onboard graphic(only with compatible processor.)
I suspect mother board what do you think?
Thanks
Set dram voltage for 1.550 to 1.500 as they are 1.5V
Got a start error
The following Channel memory did not pass cpu memory please remove the memory then plug again
Channel A
with 4 beeps
We are going to reseat the graphic card now and see no onboard graphic(only with compatible processor.)
I suspect mother board what do you think?
Thanks