PDA

View Full Version : Lian Li Backplane bp3sata, Staggered spinup



bossmaniac
06-02-2014, 06:08 PM
Hi,
i have a simple question.
Do the bp3sata Backplane (1 and 2 too) support staggered spineup? (Needed open=high ohm 11. pin on sata power conector)

Greets

Bossmaniac

Lian Li Tech
06-18-2014, 06:44 PM
Hi,
i have a simple question.
Do the bp3sata Backplane (1 and 2 too) support staggered spineup? (Needed open=high ohm 11. pin on sata power conector)

Greets

Bossmaniac

Hi Bossmaniac,

Nope, it doesn't support that.

bossmaniac
06-23-2014, 04:58 PM
Yay, finaly an answer. :pinkie:

But very disappoiting that the backplane is so useless. :hmph:

Digi-Quick
08-02-2014, 06:14 AM
Hi Bossmaniac,

Nope, it doesn't support that.

@ Lian Li Tech

Hello,
I would like to get addiitional Information on which Fact your statement is based.
Your Statement is only in one condition really true!
PIN11 is connected directly to Ground-level on the Backplane, because the Backplanes can be connectet via SATA- or 4 Pin Molex Power Connector (which apperently has no Pin 11).

If Pin 11 ist connected straight to Pin 11 then Pin 11 would be Open if the Backplane is supplied via 4-Pin Molex and the behavior of the Backplane supplied via SATA would rely on the behavior of the Power Supply itself.
I hope you understand what I mean, I'm a native german speaker :-)

Digi-Quick
08-20-2014, 07:21 PM
That was it with Lian Li, I won't buy any product of them any more!
The Products of Lian Li are much too expensive to accept a "zero Support"
(On a 60 € Sharkoon Case I got much better support!)

Question directly via lian-li Support 2 Months ago >> unanswered
Request for additional Facts in this Thread >> unanswered
Although I pointed the User "Lian Li Tech" directly to this thread via PN 1 weeek ago and the last ativity was 4 hours ago!

Question via Caseking passed to Lian-Li 2 weeks ago >> unanswered

I had planned a D8000 Case for 30 Disks using these Backplanes, but now:

FCK OFF LIAN LI

MasonStorm
11-09-2015, 09:33 AM
By the way, which of the four power connectors on the back of the BP3SATA need to be connected? Is it all four, or can I just hook up PW4, PW3 and then my choice of PW2 or PW1?

Lian Li Tech
11-09-2015, 09:45 AM
HI. Probably best to make a new thread, not post on a year old one :)

But, I will have to ask them this question. But, you can try also:
Lian-Li Global | Contact us (http://www.lian-li.com/en/contact-us/)

Use an email with no spaces, ,.-_ or any special characters. And it will take some time. Sorry.