Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: ssd and hdd raid 0 set up




  1. #1
    Join Date
    Jul 2010
    Location
    us
    Posts
    6

    Default ssd and hdd raid 0 set up

    here's my problem.....I'm going to use a 30 gig ocz vertex for a boot drive and 2 150 gig velociraptors in a raid 0 for everything else. I have a Asrock 890FX deluxe3 MB. I've been told that to set up a ssd as a boot drive that I shouldn't have any other drives hooked up. When do I install my raid driver? Before the OS install on the ssd or can I set that up afterwards. I'll be using Windows 7 64 bit. I have it all ready to go...I just need to figure this out before loading the os..... any help would be appreciated.

  2. #2
    Join Date
    May 2010
    Location
    Taipei, Taiwan
    Posts
    96

    Default Re: ssd and hdd raid 0 set up

    Dear Grumpp,

    Please kindly refer to below steps to set up your system.
    Step1. Please connect your three HDD to SATA port 1 to port 4 and adjust "SATA Operation Mode" to [RAID] under BIOS. (BIOS/ Advanced/ Storage Configuration)

    *Note: With SB850 south bridge, if you set the SATA Operation Mode to [RAID] in BIOS setting, BIOS will switch the SATA port 1 to port 4 into RAID mode but keep the SATA port 5 and port 6 under IDE mode. Please kindly refer to user manual page 57.
    User manual link: http://download.asrock.com/manual/890FX%20Deluxe3.pdf

    Step2. Reboot your system and press "Ctrl+F" into "RAID ROM Utility".
    Step3. Build a RAID volume with two HDD in RAID ROM Utility and then reboot your system again.
    Step4. Press F11 into Boot Menu and choose "boot from ODD" to install OS.
    Step5. Load RAID driver in install OS process and choose your SSD to install OS.
    Step6. Then you can install OS in SSD and have RAID 0 with two HDD.

    Best Wishes
    Sean
    ASRock Tech Support Staff

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •