Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: 890gx extreme4 dr. debug code




  1. #1
    Join Date
    Jan 2011
    Location
    Dublin Irelander
    Posts
    1

    Default 890gx extreme4 dr. debug code

    I have just built a new system for myself here are the specs
    AMD AthlonII x4 640
    Asrock 890GX extreme4
    Corsair XMS3 2x2gb DDR3 1600mhz
    Nvidia 260GTX
    LG DVD/CD Rewriter
    Seagate 500GB 7200RPM sata HardDrive

    The problem i am having is that it wont load up the bios or boot menu just wont do anything. It did when i first turned it on i got into the bios and was at hardware monitoring page and the system froze so i turned off and on again and it wont load bios or the boot menu. I am stumped the dr. debug code it gives me is 2C and in the code list it say Initializes different devices. detects and initializes the video adapter installed in the system that have optional ROMs. Can anyone help?

  2. #2
    Join Date
    May 2011
    Location
    Rudehen, Tehran, Iran
    Posts
    302

    Default Re: 890gx extreme4 dr. debug code

    Did you find the code in manual? If it is CPU related, looks like CPU incompatibility. Sorry, no more help at this time.

  3. #3
    Join Date
    May 2011
    Location
    Rudehen, Tehran, Iran
    Posts
    302

    Default Re: 890gx extreme4 dr. debug code

    Have you done cmos clear?
    The general way to clear cmos is:
    1- Disconnect main,
    2- Press the power button once (in order to flush any remaining input capacitor charges)
    3- Either, press cmos-clear button, (or) short-circuit the related jumper, or take away the battery for an hour, whichever possible for the board.

    Bahram Alinezhad
    Rudehen, Tehran, Iran.
    Last edited by bahram_alinezhad; 05-08-2011 at 08:17 AM.

  4. #4
    Join Date
    Mar 2011
    Location
    Taiwan
    Posts
    562

    Default Re: 890gx extreme4 dr. debug code

    Dear bahram_alinezhad,

    Please kinldy refer to below suggestions for testing.
    1. Clear CMOS first to try.
    2. Reinstall the CPU, memory and VGA card to try.
    3. Install your memory to white DRAM slot.
    4. Remove your VGA card and use onboard graphic to output for testing.
    5. Leave only necessary device of your computer for testing. (CPU, a stick memory, 1HDD )
    6. If possible please change another CPU or memory for testing.

    If the problem still cannot be solved, please kindly contact your local dealer to check your system.
    Thanks!

    Have a nice day
    ASRock TSD Emily

  5. #5
    Join Date
    May 2011
    Location
    Rudehen, Tehran, Iran
    Posts
    302

    Default Re: 890gx extreme4 dr. debug code

    General technical-support form of suggestion here?!!

    He made changes in bios and got out of boot, then, the first guess is bad settings for bios, so cmos-clear was my first suggestion.

    Bahram Alinezhad
    Rudehen, Tehran, Iran.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •