Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: 880G Extreme3 USB 3 and blue screen




  1. #1
    Join Date
    May 2011
    Location
    worcs
    Posts
    1

    Default 880G Extreme3 USB 3 and blue screen

    When I installed the NEC MPD720200 USB 3.0 driver it keeps blue screening as it starts up, I had to disable the chip in system properties and it runs fine, Im hoping its a driver issue, but the site still has the same driver and has not been updated:(

    Driver Im using is NEC USB 3.0 driver ver:10190

    Is there a newer driver I could try?
    Thanks

  2. #2
    Join Date
    Apr 2011
    Location
    Hungary
    Posts
    10

    Default Re: 880G Extreme3 USB 3 and blue screen

    You could download drivers from:

    NEC/RENESAS USB3 Controller (uPD720200 & uPD720200a) Drivers Version 2.0.34.1

    Link: SONY/NEC/RENESAS Drivers & Firmwares

    or from

    Link: USB 3.0 Host Controller-Treiber Download - ComputerBase

    It is possible that you will have to update also the firmware. (You need to have the correct driver & firmware combination, it is possible that new drivers don't work with very old firmwares). You can get the firmware from the first link. Updating the firmware is not without risk, so all risk is fully of the user.

    Note: newer firmware is not always better than the old firmware. So upgrade the firmware only if you have problems.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •