Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Problem with ASrock Z68 Extreme 4 Memory Slots




  1. #1
    Join Date
    May 2011
    Location
    Singapore
    Posts
    5

    Default Problem with ASrock Z68 Extreme 4 Memory Slots

    Just built a new system based on the ASrock Z68 Extreme4

    i5-2500k
    ASrock Z68 Extreme4
    2x 4gb Corsair Vengeance PC3-12800 1600mHz DDR3 Ram (CMZ8GX3M2A1600C9B)
    Hitachi 2TB Hdd
    etc


    Problem is, I can't boot at all (cant post, Dr Debug error code 45-unlisted in manual)unless I leave 1 x 4gb of ram ONLY in the ram-slot B2(white closest to edge of board)

    NO OTHER combination of ram positions works (anyone one piece of the two pieces of ram in any other slot, or 2 pieces in dual channel mode)

    Anyone else have the same problem? Am beginning to think it is the board rather than the ram.

  2. #2
    Join Date
    May 2011
    Location
    England
    Posts
    2

    Default Re: Problem with ASrock Z68 Extreme 4 Memory Slots

    I got the same problem, board has been RMA'd. :(

  3. #3
    Join Date
    May 2011
    Location
    Singapore
    Posts
    5

    Default Re: Problem with ASrock Z68 Extreme 4 Memory Slots

    Brought the board back to the shop and got it replaced with a new one

    Slots #1 and #2 are faulty

    apparently this is quite common in asrock boards..... happens on the p67 extreme4 too...


    :)

    hope you get yours soon~

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •