Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Asrock H67M issues with i3-2100




  1. #1
    Join Date
    Jun 2011
    Location
    Hong Kong
    Posts
    7

    Default Asrock H67M issues with i3-2100

    Hi,

    I've installed an i3-2100 to the H67M motherboard, the board works flawlessly except it always show using 2 phases of power in "ASRock Extreme Tuning Utility"; no matter the machine is idle or under full load.

    After switching the cpu to i3-2400, the ATX shows 4 phases of power under full load and 2 phases of power when idle; which I think is normal.

    I've then changed another H67M and installed it with an i3-2100, the same symptom appears! My question is "Is it possible that the i3-2100 consumes just too little power and it never requires to use all 4 phases of power in the MB?"

    Any input would be much appreciated.

    Thanks.

  2. #2
    Join Date
    Jun 2011
    Location
    Poland
    Posts
    2

    Default Re: Asrock H67M issues with i3-2100

    I have H67M and Pentium G840
    It is the same - only 2 phases are used

  3. #3
    Join Date
    Mar 2011
    Location
    Taiwan
    Posts
    562

    Default Re: Asrock H67M issues with i3-2100

    Dear all,

    Please kindly provide your e-mail for me.

    I will send the latest AXTU utility to you for testing.

    Thanks!

    Have a nice day
    ASRock TSD Emily

  4. #4
    Join Date
    Jun 2011
    Location
    Hong Kong
    Posts
    7

    Default Re: Asrock H67M issues with i3-2100

    Hi Emily,

    I've pm my email to you, waiting for your latest software :)

    Thanks

  5. #5
    Join Date
    Mar 2011
    Location
    Taiwan
    Posts
    562

    Default Re: Asrock H67M issues with i3-2100

    Dear ikkjr,

    I've sent the latest AXTU to you.

    After you test, please kindly provide your test result for me.

    Thanks for your help!

    Have a nice day
    ASRock TSD Emily

  6. #6
    Join Date
    Jun 2011
    Location
    Hong Kong
    Posts
    7

    Default Re: Asrock H67M issues with i3-2100

    Quote Originally Posted by ASRock TSD - Emily View Post
    Dear ikkjr,

    I've sent the latest AXTU to you.

    After you test, please kindly provide your test result for me.

    Thanks for your help!

    Have a nice day
    ASRock TSD Emily
    While running Prime95 stress test, the new ATXU software shows the correct number of power phase being used.

    However, the readings of CPU voltage & CPU speed are wrong (0.9v & 1600Mhz).

    Thanks for your attention in this matter.Asrock H67M issues with i3-2100-scn0-jpg

  7. #7
    Join Date
    Mar 2011
    Location
    Taiwan
    Posts
    562

    Default Re: Asrock H67M issues with i3-2100

    Dear ikkjr,

    Please kindly use CPU-Z tool to compare the CPU frequency and voltage.

    Thanks for your help!

    Have a nice day
    ASRock TSD Emily

  8. #8
    Join Date
    Jun 2011
    Location
    Hong Kong
    Posts
    7

    Default Re: Asrock H67M issues with i3-2100

    Quote Originally Posted by ASRock TSD - Emily View Post
    Dear ikkjr,

    Please kindly use CPU-Z tool to compare the CPU frequency and voltage.

    Thanks for your help!

    Have a nice day
    ASRock TSD Emily
    CPU-Z shows 3100Mhz & 1.1x volt.

    Thanks.

  9. #9
    Join Date
    Jun 2011
    Location
    Australia
    Posts
    32

    Default Re: Asrock H67M issues with i3-2100

    i found i had a similar-ish issue with AXTU, checking with cpu-z would have probably confirmed it, basically, i have a 890FXA deluxe 5 mobo .. i turned IES on and it would constantly play with the speed and voltages of my computer, upon disabling ies, no change, tried a few more quick diagnostics (except cpu-z =="), nothind worked .. reset the bios and bingo it was gone .. then time to re enter all my overclock settings :(

  10. #10
    Join Date
    Mar 2011
    Location
    Taiwan
    Posts
    562

    Default Re: Asrock H67M issues with i3-2100

    Dear all,

    About IES power phase issue, you can download the AXTU ver0.1.96.1 from H67M beta zone for testing.
    Link: ASRock > Products > Motherboard > H67M > Download

    Thanks!

    Have a nice day
    ASRock TSD Emily

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •