Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Page 3 of 42 FirstFirst 1234513 ... LastLast
Results 21 to 30 of 419

Thread: Asrock Z68 extreme 4 : BSOD A clock interrupt was not received ---




  1. #21
    Join Date
    Jun 2011
    Location
    Isle of Man
    Posts
    10

    Default Re: Asrock Z68 extreme 4 : BSOD A clock interrupt was not received ---

    could it be a 2500k cpu problem, as all the people i have seen with this problem have a 4 core 2500k.. just a guess! me and my bro have this board with 2600k's no problems on 24/7<!-- google_ad_section_end -->

  2. #22
    Join Date
    Jun 2011
    Location
    Asia
    Posts
    43

    Default Re: Asrock Z68 extreme 4 : BSOD A clock interrupt was not received ---

    @crezzlin, well it could be the processor or the motherboard or the combination. that's why need asrock or someone that have access to another processor or another motherboard to do the test. and if you see my old post, i pass all the stress test (prime95,intel processor test, memtest), but i still have 1 bsod every day, until which i move my harddisk to sata II connector (port 2, it was port 0 sata III) and by increasing the core voltage to 1.180 (which hopefully really solved the bsod and freezing problem, 2 days with no problem)

    @shkup, seem it not just 1-2 people that have the problem >_>, please report us when you got your new board, does it still have bsod or not, if not then i'm gonna rma my board also,

    @kick, it seem core temp doesn't recognized the 2nd generation processor yet, cos it doesn't listed a name and the vid is below 1 (0,9xx)

    @wazza300, well sadly no reply from the official asrock employee here (emily?), even the email i sent hasn't been answered

    thanks :)

  3. #23
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: Asrock Z68 extreme 4 : BSOD A clock interrupt was not received ---

    I'd say a BIOS issue or setting rather than a faulty CPU,its rare they go wrong but don't rule it out completely
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  4. #24
    kick's Avatar
    kick is offline Senior Member
    Join Date
    Feb 2009
    Location
    Europe,the wild wild west.
    Posts
    1,223

    Default Re: Asrock Z68 extreme 4 : BSOD A clock interrupt was not received ---

    There are reported problems with running both 2500k and 2600k on the z68, some overclocking,(beyond 37 ) and some not

    Yeh the VID reading on coretemp isnt like the old static one for 775 cpu's for example.
    This gave a value for max voltage u could need for your cpu at standard settings.say a q8400 cpu. 8x333=2.66Ghz and with a ViD of 1.25v indicated .It should allways run at 2.66 nps with 1.25v.
    Thats not to say the chip wouldnt run just fine at say1.20v allways(at max standard clock)

    The VID would be determined by intel and would vary across chip batch numbers.

    The ViD shown on these 2000k chips varies,personally I think because all cpu speed /overclocking is done on chip and even ones that arent overclocked vary cpu speed .
    Anyway for me at 4.8ghz under load on my 2500k i get a VID reading of 1.4v-1.5012 approx.
    Im not saying its 100% accurate but it is consistent with the voltages that are being applied to the cpu by the mbrd.
    ie I dont show a voltage of 1.5012v being applied under testing,max is 1.482 ,but I see the reading as a "you could need 1.5012v to hold 4.8ghz" and from that even testing at standard cpu speed it could show the maximum voltage,or close to it that u need to have available.
    Lets say at 4.2 ghz the coretemp indicated max VID is 1.35 v, well thats ok chances are that is the max voltage I will need to allow thru for short duration. 1.33 v max would probably cover it.

    If I was having any problems with a board on standard settings ,at least if I could get into bios, I would allow /set on fixed 1.36v to the cpu,just to eliminate any uncertainty on cpu .
    Yes I know 1.52v is supposed to be the max "safe" 2000k cpu voltage, but I have seen people running 24/7 higher than that.
    Some asrock bios releases allow you to apply in excess of 1.7v to the cpu,seems awfull hi for a thin wafer chip but, the demand was out there.

    The possibility that the later production chips arent as good as the earlier ones..yeh it has happened before with intel in terms of slightly lower overclocks.
    I think its more likely the access to the onchip gx isnt quite sorted?
    Perhaps even if a regular gx card is used ,just having the ability to use on chip gx is somehow limiting overclocks/or preventing good non overclocked operation.

    A small q in my mind would be why run a z68 and a 2000k cpu non overclocked at all .
    I lasted about 5 min at standard speed then went for it on the auto overclock.. but thats just an aside.
    Current Systems:

    Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
    Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
    Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
    8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
    60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
    GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
    Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu

    HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case

    hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
    http://www.flixya.com/video/140325/Animal-launching

  5. #25
    Join Date
    Jun 2011
    Location
    Finland
    Posts
    8

    Default Re: Asrock Z68 extreme 4 : BSOD A clock interrupt was not received ---

    I had a same problem my new computer got freeze on games and in Prime95.
    I changed Vcore from auto to 1.200 and now everything works. Prime95 was running 10h and games won't freeze anymore.

    But I'am still concerned is this board faulty one and I should send it back or is this somekind of bios bug ?

  6. #26
    Join Date
    Jun 2011
    Location
    Israel
    Posts
    8

    Default Re: Asrock Z68 extreme 4 : BSOD A clock interrupt was not received ---

    I've been working with the computer and the replacement board for the last 24H and so far so good.
    Some more interesting stuff:
    The cpu is tray version.
    I didn't O.C the cpu.

    The SATA3 ports might be the cause. The technician asked me - "Why do you need to install a SATA3 driver in the OS but nothing for SATA2?" it's a good question.
    I intend to keep working with the current setup and then will try to switch to the SATA3 port.

    I don't rule out the CPU but failures are quite rare with CPUs.

  7. #27
    Join Date
    Jun 2011
    Location
    USA
    Posts
    2

    Default Re: Asrock Z68 extreme 4 : BSOD A clock interrupt was not received ---

    Same problem here.

    ASRock Z68 Extreme4 mobo and an i5-2500K processor. Getting the BSOD approximately every other day. I have updated to the latest BIOS and still getting this issue.

    The exact code I am getting is 0x00000101 (0x0000000000000031, 0x0000000000000000, 0xFFFFF88003165180, 0x0000000000000002)

    I hope we can get this figured out because it is driving me insane!

  8. #28
    Join Date
    Jun 2011
    Location
    Israel
    Posts
    8

    Default Re: Asrock Z68 extreme 4 : BSOD A clock interrupt was not received ---

    Do you have SSD drive?
    I have Crucial C300 64GB SATA3.
    I think it's worthwhile to connect all the drives to the SATA2 ports.
    There is some chance that this is a SATA3 ports issue.

  9. #29
    Join Date
    Jun 2011
    Location
    USA
    Posts
    2

    Default Re: Asrock Z68 extreme 4 : BSOD A clock interrupt was not received ---

    No, I don't have an SSD drive (yet... looking into one though). I'll check my connections to double check and make sure that I don't have anything connected via SATA III.

  10. #30
    Join Date
    Jun 2011
    Location
    Finland
    Posts
    8

    Default Re: Asrock Z68 extreme 4 : BSOD A clock interrupt was not received ---

    I take my words back. Now my comp has freezed two times: one time on windows and another when playing battlefield BC2.

    I have 2500k and SSD.

    I really hope this will get solved soon

Page 3 of 42 FirstFirst 1234513 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •