I have a new corsair force 3 ssd serial starting with 1129 so it is well past the 1122 and former with issues. I also have a new asrock extreme6 x58 with the marvell 9128 sata 3. In the bios I have the ssd performance enabled. I also set all the sata II and 3 ports to ahci mode. In device manager I see 3 instances of the marvell 91xx SATA 6G controller and it is using marvell driver version 1.0.0.1051. These are the latest drivers on the asrock site. The disk shows up corsair force 3 ssd SCSI disk drive using driver version 6.1.7600.16385.

I did use acronis to copy my corsair f120 image to this force 3. I used diskpart and verified alignment is still 1024. No issues with this.

My atto benchmarks with this drive absolutely suck. I know the marvell 9128 isn't going to let the drive operate to max capacity but there is clearly something wrong here. I should be topping out around 400 and it should be consistently better not dipping down. Any ideas?

By dirtriderdan at 2011-07-27


By dirtriderdan at 2011-07-27