Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: problem assembling computer




  1. #1
    Join Date
    Feb 2012
    Location
    columbus
    Posts
    1

    Default problem assembling computer

    I am a first time computer builder and I have a ASRock Z68 Extreme3 Gen3 motherboard SeaSonic S12II 520 Bronze 520W power supply Seagate Barracuda ST500DM002 500GB internal hard drive XFX Double D HD-687A-ZDFC Radeon HD 6870 graphics card G.SKILL Ripjaws X Series 8GB (2 x 4GB) of ram and an i5 2500k cpu. i put it all together and cant get the bios to come up. I also have a 45 come up on the motherboard and it isnt in my manual. How do i know if i set it up wrong or if i have a bad part? Can anyone tell me where to go next?

  2. #2
    Join Date
    Aug 2009
    Location
    Birmingham,Great Britain
    Posts
    9,250

    Default Re: problem assembling computer

    tried without the graphic card installed? made sure you plugged the graphic card power plugs in? usually two 6pin plugs,and made sure you plugged the 24pin motherboard power and 4 or 8pin cpu power plugs in from the psu?
    Gigabyte z77x UP4-TH F11c Modded Bios
    Intel i7 3770k 24/7@4.8ghz 1.38v Turbo llc +0.165v dvid multithreading enabled
    Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
    Thermalright Silver Arrow Cpu Cooler
    1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
    1xSamsung f4 HD204UI 2tb hard drive Storage
    Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
    Razer Lycosa Keyboard
    Logitech X-530 5.1 Speakers
    Lite-On iHAS124-19 24x Sata DVDRW
    K-World Hybrid DVB-T 210SE Digital T.V Card
    L.G E2260V L.E.D 1920x1080 Monitor
    Xfx Pro 750w silver rated Psu 80+
    Fractal Arc Midi Case

    http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
    http://www.youtube.com/user/warren304#p/u Visit Me On Youtube

    Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
    Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!

  3. #3
    profJim's Avatar
    profJim is online now Chief Munchkin + moderator
    Join Date
    Dec 2008
    Location
    Tacoma, WA. [USA]
    Posts
    7,811

    Default Re: problem assembling computer

    page 43 in your user manual:
    0x3F-0x4E = OEM post memory initialization codes

    These are not decimal codes, they are hexadecimal numbers where the sequence is 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F
    In this case, the codes are 3F, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 4A, 4B, 4C, 4D, 4E

    If you system halts with code 45 (hex), there probably is a memory problem.
    Try booting with only one memory module installed, starting with the first memory slot.
    You might need to run separate boot tests with each memory module in different slots to determine if the problem is with the modules or the memory slots.

    Before you add or remove memory (or any hardware), turn off your pc, turn off the power supply switch at the rear of your case, then press and hold the front panel on/off switch for 10 - 15 seconds to discharge any stored electrical charge in your system. I suggest that you unplug the power supply cable at the wall outlet before you discharge your system. If you don't take these precautions, you might damage any hardware that you remove or install.
    Q9650 @ 4.10GHz [9x456MHz]
    P35-DS4 [rev: 2.0] ~ Bios: F14
    4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15
    MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ---->
    Seasonic SS-660XP2 80 Plus Platinum psu (660w)
    WD Caviar Black WD6401AALS 640GB (data)
    Samsung 840 Pro 256GB SSD (boot)
    SLI @ 16/4 works when running HyperSLI
    Cooler Master 120XL Seidon push/pull AIO cpu water cooling
    Cooler Master HAF XB computer case (RC-902XB-KKN1)
    Asus VH242H 24" monitor [1920x1080]
    MSI N460GTX Hawk (1GB) video card
    Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium
    HT|Omega Claro plus+ sound card
    CyberPower CP1500PFCLCD UPS
    E6300 (R0) @ 3.504GHz [8x438MHz] ~~ P35-DS3L [rev: 1.0] ~ Bios: F9 ~~ 4x2GB Kingston HyperX T1 PC2-8500, 876MHz @4-4-4-10
    Seasonic X650 80+ gold psu (650w) ~~ Xigmatek Balder HDT 1283 cpu cooler ~~ Cooler Master CM 690 case (RC-690-KKN1-GP)
    Samsung 830 128GB SSD MZ-7PC128B/WW (boot) ~~ WD Caviar Black WD6401AALS 640GB (data) ~~ ZM-MFC2 fan controller
    HT|Omega Striker 7.1 sound card ~~ Asus VH242H monitor [1920x1080] ~~ Logitech Z-5500 Digital 5.1 Speakers
    win7 x64 sp1 Home Premium ~~ CyberPower CP1500PFCLCD U.P.S
    .


  4. #4
    Join Date
    Feb 2012
    Location
    Texas, USA
    Posts
    2

    Default Re: problem assembling computer

    Just a suggestion: try connecting your monitor to the motherboard video connector. I have the same board and same graphics card, and can only get a video signal from the motherboard outputs.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •