Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Dr. Debug error code "5d" on 990FX Extreme4




  1. #1
    Join Date
    Apr 2012
    Location
    US
    Posts
    2

    Default Dr. Debug error code "5d" on 990FX Extreme4

    This status code is not listed in the manual. Board hangs at this code.

  2. #2
    Acebmxer's Avatar
    Acebmxer is offline Gigabyte Elite
    Join Date
    May 2009
    Location
    New Jersey, United States
    Posts
    2,817

    Default Re: Dr. Debug error code "5d" on 990FX Extreme4

    0x5C-0x5F Reserved for future AMI error codes 5D should fall in this area.

    or 0x50 encase the "D" is supposed to be a "O". Memory initialization error. Invalid memory type or incompatible memory speed.

    Try clearing the Cmos and try again.
    Main Rig
    Gigabyte z87x-OC
    Haswell i7 4770k - 4.7Ghz @ 1.330v LLC Extreme (L310B492)
    G.Skill F3-1700CL9D-8GBXM DDR3-2133mhz 9-11-10-28 1.65v @ 2800mhz 12-14-14-35 1.7v
    Samsung Green 8GB 2x4GB MV-3V4G3D/US DDR3 1.3v 30nn @ 2200Mhz 11-11-11-32 1.60v
    Sapphire ATI HD 7970 3GB clocked 1200MHz @ 1.181v.
    HiS ATI HD 6950
    Samsung 840 Pro 256GB SSD (boot Drive) on Intel sata3 controller port0
    Corsair Force GT 120 GB Sata3 SSD on Intel sata3 controller port1
    Samsung 320GB HD322GJ 7200 RPM 16M cache on Intel sata3 controller port2
    Sony Optiarc DVD-RW AD-7240S on Intel sata3 controller port5
    CORSAIR CMPSU-850TX PSU
    Swiftech MCP655-B Pump
    EK Supremacy Cpu Block
    Swiftech Mcres Micro Rev 2 Reservoir
    Black Ice GTX Xtreme 360 Radiator





  3. #3
    Join Date
    Apr 2012
    Location
    US
    Posts
    2

    Default Re: Dr. Debug error code "5d" on 990FX Extreme4

    Thank you.

    It is definitely "5d" (lowercase "d") as displayed by the LED on the mother board.

    I have cleared the CMOS with the same results.

    I thought maybe AMI had used the code after the manual was published.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •