Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 4 of 4

Thread: asrock z68 extreme 4 + Nvidia GTX560 = No visual on monitor




  1. #1
    Join Date
    Jun 2012
    Location
    Sweden
    Posts
    2

    Default asrock z68 extreme 4 + Nvidia GTX560 = No visual on monitor

    Hi!

    Me and my friends we recently set up a new computer and we cannot seem to get any visual from it. We have set up everything right, all the fans span and PC boots up fine, it's just that we don't seem to be able to get any visual from either the gfx-card or the mobos built-in outlet when we boot.

    The monitor works just perfectly as we have tested it on another PC as do the cables. It's just seems that we cannot get any boot on screen.

    Is it any issue that we can simply solve on our own, could it be BIOS-related or are we only left with RMA?

    Anyone here who has had an issue with this combination of hardware?

    Thx for any reply..
    Last edited by Nowzar; 06-18-2012 at 05:30 AM.

  2. #2
    CRRacer is offline Junior Member
    Join Date
    Jun 2012
    Location
    Kansas
    Posts
    98

    Default Re: asrock z68 extreme 4 + Nvidia GTX560 = No visual on monitor

    Did you try booting with onboard video, no discreet GPU installed? Did you try to reseat your GPU? Any error lights on the board or code displayed (if your board has these features).

  3. #3
    Join Date
    Jun 2012
    Location
    Sweden
    Posts
    2

    Default Re: asrock z68 extreme 4 + Nvidia GTX560 = No visual on monitor

    Quote Originally Posted by CRRacer View Post
    Did you try booting with onboard video, no discreet GPU installed? Did you try to reseat your GPU? Any error lights on the board or code displayed (if your board has these features).
    Yes, we removed the Nvidia-card and tried with the onboard video but nothing happened. We have not been able to install anything or change any settings since we aren't getting any visual and thus have not even been able to make it into BIOS...

    As for Errorcodes displayed I think my friend in question who built the system told me something about that the mobo at the bottom showed 55, but I just assumed that it was the temp. Could that have been an error msg of any sort?

    http://hardwareoverclock.com/Mainboa...treme4-005.jpg

  4. #4
    CRRacer is offline Junior Member
    Join Date
    Jun 2012
    Location
    Kansas
    Posts
    98

    Default Re: asrock z68 extreme 4 + Nvidia GTX560 = No visual on monitor

    You could try downloading the manual ASRock > Products > Motherboard Series, they offer and extreme 4 and a extreme 4 Gen 3. Just reading reviews I've seen that code 55 being referred to from memory error, to CPU.

    Recommendations that I have seen have ranged from inserting just one memory chip in the A2 slot, if that works, then add another to the B2 slot (this gives dual channel support).

    If it acutally refers to the CPU it's been recommended to pull the CPU and check the pins to make sure none are bent, if they are, it will be claimed as user fault.

    If it were me, I'd start with the basics, removing the video card, and only installing one memory stick. If this doesn't get you any visuals and you still see 55, you should probably call ASRock for further assistance.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •