Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: Extreme 4 failure to start up




  1. #1
    Valkeire is offline Junior Member
    Join Date
    Aug 2012
    Location
    Ireland
    Posts
    1

    Default Extreme 4 failure to start up

    Hi,
    Today, I fitted an new Extreme4 970 m/board with a new AMD Phenom2 X4 965 BE. New RAM also fitted. Comp powered up with no problem and was working ok. I shut it down for a short while, but it will now not start up. Chassis and CPU fans are working, debug display just shows 00, no activity on monitor or disk activity light.

    Any ideas on what to do next??

    Kind regards

    Valkeire
    Last edited by Valkeire; 08-16-2012 at 07:13 AM.

  2. #2
    Babdi is offline Junior Member
    Join Date
    Aug 2012
    Location
    India
    Posts
    56

    Default Re: Extreme 4 failure to start up

    Quote Originally Posted by Valkeire View Post
    Hi,
    Today, I fitted an new Extreme4 970 m/board with a new AMD Phenom2 X4 965 BE. New RAM also fitted. Comp powered up with no problem and was working ok. I shut it down for a short while, but it will now not start up. Chassis and CPU fans are working, debug display just shows 00, no activity on monitor or disk activity light.

    Any ideas on what to do next??

    Kind regards

    Valkeire
    Try the following
    Clear the CMOS
    Restart
    If Display then stop
    No display then
    check if the monitor is properly connected
    Monitor connected ok then
    Check if RAM is properly seated
    If RAM Okay then
    remove all RAM sticks and just insert one stick in slot 0
    Restart
    If RAM is okay then
    Re-check PSU loose connections
    If PSU is okay then
    Disconnect everything except motherboard power supply
    Insert one RAM stick and start
    Do you see BIOS ?
    If no then your MB could be faulty
    Speed is the limit

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •