Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: ASRock Fatal1ty Z77 Pro USB mouse freezes




  1. #1
    Join Date
    May 2011
    Location
    Europe
    Posts
    17

    Default ASRock Fatal1ty Z77 Pro USB mouse freezes

    System: Windows 7 Ultimate 64Bit SP1
    Mouse: Steelseries Kinzu V2Pro (or other)
    PSU: Seasonic P660

    When booting the PC that freezes mouse when starting Windows occasionally a.
    But only occasionally.
    Sometimes when moving the mouse in the UEFI BIOS!
    What could be the cause?
    BIOS has been renewed, drivers are up-to-date.
    Can the ASRock Z77 Board have an error?
    Regards
    Last edited by oldmen; 03-29-2013 at 04:20 PM.

  2. #2
    Join Date
    Jun 2012
    Location
    usa
    Posts
    373

    Default Re: ASRock Fatal1ty Z77 Pro USB mouse freezes

    It sounds like you are using a USB 3.0 port, if you are ,use a native 2.0. A mouse can work faster then the eye on 2.0. The mouse also has ok reviews, some bad some good.

    Make sure your BIOS is at 1,50, there was a UBS mouse compatibility added before this.

    Check devise MGR for the native USB drivers, they probably show as microsoft, you can point them to your INF intel chipset download, you must extract the setup to see the INF files or for the files to be installed.


    The newest INF intel driver, chipset download is 9.4.0.1017, all motherboard company's don't keep up on drivers.


    As for mouse in BIOS, also sounds like your using a 3.0 port.

  3. #3
    Join Date
    May 2011
    Location
    Europe
    Posts
    17

    Default Re: ASRock Fatal1ty Z77 Pro USB mouse freezes

    Thanks @odiebugs.
    The mouse is connected to a USB 2.0 port.
    My UEFI-Bios Version is 1.60.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •