Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 9 of 9

Thread: 990FX Extreme4 with FX8350 CPU, New build no post




  1. #1
    jshu23 is offline Junior Member
    Join Date
    Mar 2013
    Location
    Michigan
    Posts
    3

    Default 990FX Extreme4 with FX8350 CPU, New build no post

    I just set up my new build and got an utterly disappointing problem. Here are the specs:

    990FX Extreme 4 (bios 2.0)
    FX8350 CPU
    Geforce GT 640
    2x8 GB Gskil 1866 RAM
    256GB SSD

    Nothing special about it. When I hit the power button, all the LED's come on and the fans run but there is no post and I get no output to the monitor on either HDMI output of the gfx card. Dr debug shows "00" which according to the Asrock site means check CPU and clear CMOS. I re-seated the CPU and still have the same issue. Since it won't post I'm assuming a mobo problem, but are there other things I should try?

    Thanks.

  2. #2
    Join Date
    Jun 2012
    Location
    usa
    Posts
    373

    Default Re: 990FX Extreme4 with FX8350 CPU, New build no post

    Did you inspect the CPU pins with a magnifying glass to make sure that there is not one bent pin ? Press and hold you clear CMOS button on the back panel.

    Reseat the graph card. What slots did you use for memory ? 24pin and 8 pin power correctly seated ?

    You need to get the debug code cleared, swap memory around, check CPU, use DVI to start.
    Last edited by odiebugs; 03-30-2013 at 10:29 AM.

  3. #3
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: 990FX Extreme4 with FX8350 CPU, New build no post

    You didn't forget the 8-pin ATX12V1 power connector at the top of the board did you?
    #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
    ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.

    #2 - G.Skill RAM Configurator for your boardSamsung Memory for your boardLatest AMD Chipset Drivers/WindowsLatest AMD Graphics Drivers/WindowsLatest Intel Drivers

    #3 - Please use the eXtreme Outer Vision Power Supply Calculator found HERE to determine if it might be your PSU at issue.
    ____Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

  4. #4
    jshu23 is offline Junior Member
    Join Date
    Mar 2013
    Location
    Michigan
    Posts
    3

    Default Re: 990FX Extreme4 with FX8350 CPU, New build no post

    Quote Originally Posted by - wardog - View Post
    You didn't forget the 8-pin ATX12V1 power connector at the top of the board did you?
    I really wish I could say no to this....

    Apparently it's been too long since I built a PC and I wasn't paying good enough attention to what I was connecting. Now I just gotta try and boot up again.

  5. #5
    Join Date
    Jun 2012
    Location
    usa
    Posts
    373

    Default Re: 990FX Extreme4 with FX8350 CPU, New build no post

    I asked the same, glad I wasted my time.

  6. #6
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: 990FX Extreme4 with FX8350 CPU, New build no post

    Quote Originally Posted by odiebugs View Post
    I asked the same, glad I wasted my time.
    odie, you fall outta the wrong side of the bed this morning?
    #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
    ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.

    #2 - G.Skill RAM Configurator for your boardSamsung Memory for your boardLatest AMD Chipset Drivers/WindowsLatest AMD Graphics Drivers/WindowsLatest Intel Drivers

    #3 - Please use the eXtreme Outer Vision Power Supply Calculator found HERE to determine if it might be your PSU at issue.
    ____Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

  7. #7
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: 990FX Extreme4 with FX8350 CPU, New build no post

    Quote Originally Posted by - wardog - View Post
    odie, you fall outta the wrong side of the bed this morning?
    A beautiful Saturday morning that it is.

    Suns up in full force, the birds are chirping. We'll be at the beach cold drink in hand oogling the bikinis before too long
    #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
    ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.

    #2 - G.Skill RAM Configurator for your boardSamsung Memory for your boardLatest AMD Chipset Drivers/WindowsLatest AMD Graphics Drivers/WindowsLatest Intel Drivers

    #3 - Please use the eXtreme Outer Vision Power Supply Calculator found HERE to determine if it might be your PSU at issue.
    ____Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

  8. #8
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: 990FX Extreme4 with FX8350 CPU, New build no post

    Quote Originally Posted by jshu23 View Post
    I really wish I could say no to this....

    Apparently it's been too long since I built a PC and I wasn't paying good enough attention to what I was connecting. Now I just gotta try and boot up again.
    BTW, Hello and Welcome from a fellow Michigander.

    You running there OK now?
    #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
    ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.

    #2 - G.Skill RAM Configurator for your boardSamsung Memory for your boardLatest AMD Chipset Drivers/WindowsLatest AMD Graphics Drivers/WindowsLatest Intel Drivers

    #3 - Please use the eXtreme Outer Vision Power Supply Calculator found HERE to determine if it might be your PSU at issue.
    ____Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

  9. #9
    jshu23 is offline Junior Member
    Join Date
    Mar 2013
    Location
    Michigan
    Posts
    3

    Default Re: 990FX Extreme4 with FX8350 CPU, New build no post

    Hello and yes I am running fine now. Thanks for the help. Sometimes you just forget the simple solutions. Loving my new setup...big difference between the dual core 2.2GHz I replaced with the 8 core 4.0GHz.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •