Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 5 of 5

Thread: Error Code 93




  1. #1
    Join Date
    Oct 2013
    Location
    UK
    Posts
    3

    Default Error Code 93

    Upon certain restarts and shutdowns and up times i would sometimes get a "93" on the Mr Debugger which just displays a black screen, this usually leads me to pressing the reset button until the screen comes up with "Gen 1, no devices found" and then loads the OS.

    Is there any way to tell what is happening?

  2. #2
    parsec's Avatar
    parsec is offline Senior Member
    Join Date
    Jun 2012
    Location
    Third stone from the sun
    Posts
    4,824

    Default Re: Error Code 93

    Error code 93 is: PCI Bus Hot Plug Controller Initialization

    We can't help you further until we know what your PC's components are, mother board, CPU, disk drives, and in this case what devices you have connected to PCI slots.

  3. #3
    Join Date
    Oct 2013
    Location
    UK
    Posts
    3

    Default Re: Error Code 93

    Quote Originally Posted by parsec View Post
    Error code 93 is: PCI Bus Hot Plug Controller Initialization

    We can't help you further until we know what your PC's components are, mother board, CPU, disk drives, and in this case what devices you have connected to PCI slots.
    Ah sorry forgot to add that.

    Mobo: ASRock Extreme4 Z77
    CPU : Intel i5 3570k
    DVD/RW :
    TSSTcorp CDDVDW SH-224DB ATA DeviceTSSTcorp DVD-ROM SH-118AB SCSI CdRom Device

    the only thing i have connected in the PCIE slot is the GPU which is
    MSI GTX 660ti

  4. #4
    parsec's Avatar
    parsec is offline Senior Member
    Join Date
    Jun 2012
    Location
    Third stone from the sun
    Posts
    4,824

    Default Re: Error Code 93

    Are you using Windows 7 or 8? Do you have a video cable (DVI, HDMI, etc) connected to the board's I/O panel and your monitor, for the on-CPU graphics, and your video card too?

  5. #5
    Join Date
    Oct 2013
    Location
    UK
    Posts
    3

    Default Re: Error Code 93

    Sorry for the late reply, busy with uni stuff.

    Im using Windows 7 but nothing is plugged into the I/O ports at the back as im using the GPU for both monitors.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •