Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 3 of 3

Thread: Z87 OC Formula shutdown hangs after installation of Rapid OC Software




  1. #1
    Join Date
    Nov 2013
    Location
    Pennsylvanai, USA
    Posts
    4

    Default Z87 OC Formula shutdown hangs after installation of Rapid OC Software

    After Installation of Win 7 64 I proceed to install drivers and apps from the ASRock CD. I chose the "install all" option. After installation the system hangs during shutdown. I re-installed the OS and there was no system hang on shutdown. I installed the drivers and apps from the ASRock CD with a reboot in between each one. All was OK untill after installing Rapid OC. Now the system hangs at shutdown again Un-installing Rapid OC did not correct the problem. Upgraded BIOS to 1.8, the problem still persists. Has anyone else encountered this?

    Thanks for any suggestions you may have.

  2. #2
    Join Date
    Jun 2012
    Location
    usa
    Posts
    373

    Default Re: Z87 OC Formula shutdown hangs after installation of Rapid OC Software

    You can try uninstalling the ETRON USB drivers, either in uninstall or from devise MGR, Then make sure the driver in devise MGR is not ETRON and it's MS default after reboot, then see if rapid causes the same issue.

    If it's ok, do a clean install, and don't install the ETRON driver listed, actually go to the z87 OC formula/AC and use the win 7 64 driver listed.

    You might need to do a clean install leaving out the ETRON driver and then after running OS try the rapid OC, if same problem, you will be positive it's rapid.
    Last edited by odiebugs; 11-03-2013 at 08:12 AM.

  3. #3
    Join Date
    Nov 2013
    Location
    Pennsylvanai, USA
    Posts
    4

    Thumbs up Re: Z87 OC Formula shutdown hangs after installation of Rapid OC Software

    Quote Originally Posted by odiebugs View Post
    You can try uninstalling the ETRON USB drivers, either in uninstall or from devise MGR, Then make sure the driver in devise MGR is not ETRON and it's MS default after reboot, then see if rapid causes the same issue.

    If it's ok, do a clean install, and don't install the ETRON driver listed, actually go to the z87 OC formula/AC and use the win 7 64 driver listed.

    You might need to do a clean install leaving out the ETRON driver and then after running OS try the rapid OC, if same problem, you will be positive it's rapid.
    PROBLEM SOLVED Thanks odiebugs! The Etron drivers didn't want to go willingly though. The system hung when un-installing from both control panel and dvmanger. However, somewhere in that process they did un-install. The Etron 64x version 1.0.0.118 driver from the ASRock Z87 Formula/AC download section work well with no shutdown hang, even after re-installing Rapid OC.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •