Please report all spam threads, posts and suspicious members. We receive spam notifications and will take immediate action!
Results 1 to 2 of 2

Thread: I think I made a huge mistake ... need help ASAP




  1. #1
    Join Date
    Dec 2013
    Location
    Syria/Holland
    Posts
    1

    Exclamation I think I made a huge mistake ... need help ASAP

    Hey!
    couple days ago i ordered an Asrock 890GX Pro3 (ASRock > 890GX Pro3 )
    Its my upgrade fro ma M5a78l-m/usb3 motherboard. I needed a new one because mine was really pissing me off because it had coilwhine 24/7 ( and because I want to overclock my CPU a bit more )
    So i've searched on the internet if the 890GX chipset supports my CPU ( FX 6300 ) and apparently it does but .... when i clicked on ASRock > 890GX Pro3 it didnt show any piledriver CPU as supported ...
    Will my new motherboard ( which I will recieve tomorrow )be able to run my CPU ? ( FX 6300 ) ?

    Please, any help or an answer on my question would be really appreciated

  2. #2
    Join Date
    Nov 2012
    Location
    USA
    Posts
    2,675

    Default Re: I think I made a huge mistake ... need help ASAP

    It should work, then again, it might not. But if it does you might be missing some instruction set execution the Vishera has over and above Zambezi available instructions.

    Also, make sure before you assemble it it has BIOS 1.40 flashed. So long you bought it new and not second hand or used look at the lower right corner to the left of where 1394a is silkscreened on the board. There's a white sticker over the BIOS chip itself that lists/states what the BIOS revision is as it came from the factory. It req's 1.40 for (the listed) AM3+ CPUs.

    I would contact ASRock Technical Support HERE and request they modify a BIOS for your FX-6300..
    Last edited by - wardog -; 12-10-2013 at 07:05 AM.
    #1 - Please, when seeking help, enter the make and model of ALL parts that your system is comprised of in your Signature, or at least the model #'s in your System Specs, then "Save' it.
    ____If you are overclocking, underclocking, or undervolting any parts, informing us of this and their values would prove beneficial in helping you.

    #2 - G.Skill RAM Configurator for your boardSamsung Memory for your boardLatest AMD Chipset Drivers/WindowsLatest AMD Graphics Drivers/WindowsLatest Intel Drivers

    #3 - Please use the eXtreme Outer Vision Power Supply Calculator found HERE to determine if it might be your PSU at issue.
    ____Consider your PSU to be the foundation from which all else is built upon. Anything built upon a weak foundation is poorly built.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •